FACTORS AFFECTING THE DRYING BEHAVIOR OF CERAMIC FILMS

Aylin Şakar-deliormanlı; Erdal Çelik; Mehmet Polat

Research Article

FACTORS AFFECTING THE DRYING BEHAVIOR OF CERAMIC FILMS

Year 2009, Volume: 9 Issue: 3, 105 - 110, 01.12.2009

Aylin Şakar-deliormanlı Erdal Çelik Mehmet Polat

Abstract

Drying behavior of PMN films were investigated using a cantilever deflection based device and scanning probe microscope. Drying stress of the films was measured as a function of suspension composition. Results showed that hydroxypropyl methycellulose (HPMC) has some influence on the stress formation due to its effect on the surface tension of the suspension. On the other hand roughness measurements showed that HPMC has insignificant effect on the roughness of the films and roughness is mainly depended on the binder content of the suspensions.

Keywords

Tape Casting, Ceramic Suspensions, Drying Stress, Roughness

References

1. Kiennemann, J., Chartier, T., Pagnoux, C., Baumard, J.F., Huger, M., and Lamerant, J.M., Drying Mechanism and Stress Development in Aqueous Alumina Tape Casting, Journal of the European Ceramic Society, Vol. 25, No.9, Pages 1551-1564, 2005.
2. Tian, T., Jiang, D., Zhang, J., and Lin, Q., Aqueous Tape Casting Process for Hydroxyapatite, Journal of the European Ceramic Society, Vol. 27, No.7, Pages 2671–2677, 2007.
3. Cui, X., Ouyang, S., Yu, Z., Wang, C., and Huang, Y., A Study on Green Tapes for LOM with Water Based Tape Casting Processes, Materials Letters, Vol. 57, Pages 1300-1304, 2003.
4. Hotza, D. and Greil, P., Review: Aqueous Tape Casting of Ceramic Powders, Materials Science and Engineering, Vol. A202, Pages 206-217, 1995.
5. Martinez, C.J., and Lewis, J., Rheological, Structural, and Stress Evolution of Aqueous Al2O3: Latex Tape Cast Layers, Journal of the American Ceramic Society, Vol. 85, No.10, Pages 2409-16, 2002.
6. Chiu, R.C. and Cima, M.J., Drying of Granular Ceramic Films: II, Drying Stress, Saturation Uniformity, Journal of the American Ceramic Society, Vol. 76, Pages 2769-2777, 1993.
7. Scherer, G.W., Theory of Drying, Journal of the American Ceramic Society, Vol. 73, No.1, Pages 3-14, 1990.
8. Scherer, G.W., Aging and Drying of Gels, Journal of Non-Crystalline Solids, Vol. 100, Pages 77-92, 1988.
9. Şakar-Deliormanlı, A., Çelik,E., and Polat, M., Preparation of the Pb(Mg1/3Nb2/3)O3 Films by Aqueous Tape Casting, Journal of the European Ceramic Society, Vol. 29, Pages 115-123, 2009.
10. Lewis, J.A., Colloidal Processing of Ceramics, Journal of the American Ceramic Society, Vol. 83, No.10, Pages 2341-59, 2000.
11. Smay, J.E., Directed Colloidal Assembly and Characterization of PZT Polymer Composites, PhD thesis, University of Illinois at Urbana Champaign, 2002.
12. Smay, J.E. and Lewis, J.A., Structural and Property Evolution of Aqueous Based Lead Zirconate Titanate Tape Cast Layers, Journal of the American Ceramic Society, Vol. 84, No.11, Pages 2495-500, 2001.
13. Martinez, C.J., Structure and Property Evolution during Film Formation from Binary Colloidal Suspensions, PhD Thesis, University of Illinois at Urbana Champaign, 2002.

FACTORS AFFECTING THE DRYING BEHAVIOR OF CERAMIC FILMS

Year 2009, Volume: 9 Issue: 3, 105 - 110, 01.12.2009

Aylin Şakar-deliormanlı Erdal Çelik Mehmet Polat

Abstract

Drying behavior of PMN films were investigated using a cantilever deflection based device and
scanning probe microscope. Drying stress of the films was measured as a function of suspension
composition. Results showed that hydroxypropyl methycellulose (HPMC) has some influence on the
stress formation due to its effect on the surface tension of the suspension. On the other hand roughness
measurements showed that HPMC has insignificant effect on the roughness of the films and roughness
is mainly depended on the binder content of the suspensions.

Keywords

Roughness, Tape Casting, Ceramic Suspensions, Drying Stress

References

1. Kiennemann, J., Chartier, T., Pagnoux, C., Baumard, J.F., Huger, M., and Lamerant, J.M., Drying Mechanism and Stress Development in Aqueous Alumina Tape Casting, Journal of the European Ceramic Society, Vol. 25, No.9, Pages 1551-1564, 2005.
2. Tian, T., Jiang, D., Zhang, J., and Lin, Q., Aqueous Tape Casting Process for Hydroxyapatite, Journal of the European Ceramic Society, Vol. 27, No.7, Pages 2671–2677, 2007.
3. Cui, X., Ouyang, S., Yu, Z., Wang, C., and Huang, Y., A Study on Green Tapes for LOM with Water Based Tape Casting Processes, Materials Letters, Vol. 57, Pages 1300-1304, 2003.
4. Hotza, D. and Greil, P., Review: Aqueous Tape Casting of Ceramic Powders, Materials Science and Engineering, Vol. A202, Pages 206-217, 1995.
5. Martinez, C.J., and Lewis, J., Rheological, Structural, and Stress Evolution of Aqueous Al2O3: Latex Tape Cast Layers, Journal of the American Ceramic Society, Vol. 85, No.10, Pages 2409-16, 2002.
6. Chiu, R.C. and Cima, M.J., Drying of Granular Ceramic Films: II, Drying Stress, Saturation Uniformity, Journal of the American Ceramic Society, Vol. 76, Pages 2769-2777, 1993.
7. Scherer, G.W., Theory of Drying, Journal of the American Ceramic Society, Vol. 73, No.1, Pages 3-14, 1990.
8. Scherer, G.W., Aging and Drying of Gels, Journal of Non-Crystalline Solids, Vol. 100, Pages 77-92, 1988.
9. Şakar-Deliormanlı, A., Çelik,E., and Polat, M., Preparation of the Pb(Mg1/3Nb2/3)O3 Films by Aqueous Tape Casting, Journal of the European Ceramic Society, Vol. 29, Pages 115-123, 2009.
10. Lewis, J.A., Colloidal Processing of Ceramics, Journal of the American Ceramic Society, Vol. 83, No.10, Pages 2341-59, 2000.
11. Smay, J.E., Directed Colloidal Assembly and Characterization of PZT Polymer Composites, PhD thesis, University of Illinois at Urbana Champaign, 2002.
12. Smay, J.E. and Lewis, J.A., Structural and Property Evolution of Aqueous Based Lead Zirconate Titanate Tape Cast Layers, Journal of the American Ceramic Society, Vol. 84, No.11, Pages 2495-500, 2001.
13. Martinez, C.J., Structure and Property Evolution during Film Formation from Binary Colloidal Suspensions, PhD Thesis, University of Illinois at Urbana Champaign, 2002.

There are 13 citations in total.

Details

Primary Language	English
Subjects	Engineering
Journal Section	Articles
Authors	Aylin Şakar-deliormanlı This is me Erdal Çelik This is me Mehmet Polat This is me
Publication Date	December 1, 2009
Submission Date	August 8, 2015
Published in Issue	Year 2009 Volume: 9 Issue: 3

Cite

APA	Şakar-deliormanlı, A., Çelik, E., & Polat, M. (2009). FACTORS AFFECTING THE DRYING BEHAVIOR OF CERAMIC FILMS. Afyon Kocatepe Üniversitesi Fen Ve Mühendislik Bilimleri Dergisi, 9(3), 105-110.
AMA	Şakar-deliormanlı A, Çelik E, Polat M. FACTORS AFFECTING THE DRYING BEHAVIOR OF CERAMIC FILMS. Afyon Kocatepe Üniversitesi Fen Ve Mühendislik Bilimleri Dergisi. December 2009;9(3):105-110.
Chicago	Şakar-deliormanlı, Aylin, Erdal Çelik, and Mehmet Polat. “FACTORS AFFECTING THE DRYING BEHAVIOR OF CERAMIC FILMS”. Afyon Kocatepe Üniversitesi Fen Ve Mühendislik Bilimleri Dergisi 9, no. 3 (December 2009): 105-10.
EndNote	Şakar-deliormanlı A, Çelik E, Polat M (December 1, 2009) FACTORS AFFECTING THE DRYING BEHAVIOR OF CERAMIC FILMS. Afyon Kocatepe Üniversitesi Fen Ve Mühendislik Bilimleri Dergisi 9 3 105–110.
IEEE	A. Şakar-deliormanlı, E. Çelik, and M. Polat, “FACTORS AFFECTING THE DRYING BEHAVIOR OF CERAMIC FILMS”, Afyon Kocatepe Üniversitesi Fen Ve Mühendislik Bilimleri Dergisi, vol. 9, no. 3, pp. 105–110, 2009.
ISNAD	Şakar-deliormanlı, Aylin et al. “FACTORS AFFECTING THE DRYING BEHAVIOR OF CERAMIC FILMS”. Afyon Kocatepe Üniversitesi Fen Ve Mühendislik Bilimleri Dergisi 9/3 (December 2009), 105-110.
JAMA	Şakar-deliormanlı A, Çelik E, Polat M. FACTORS AFFECTING THE DRYING BEHAVIOR OF CERAMIC FILMS. Afyon Kocatepe Üniversitesi Fen Ve Mühendislik Bilimleri Dergisi. 2009;9:105–110.
MLA	Şakar-deliormanlı, Aylin et al. “FACTORS AFFECTING THE DRYING BEHAVIOR OF CERAMIC FILMS”. Afyon Kocatepe Üniversitesi Fen Ve Mühendislik Bilimleri Dergisi, vol. 9, no. 3, 2009, pp. 105-10.
Vancouver	Şakar-deliormanlı A, Çelik E, Polat M. FACTORS AFFECTING THE DRYING BEHAVIOR OF CERAMIC FILMS. Afyon Kocatepe Üniversitesi Fen Ve Mühendislik Bilimleri Dergisi. 2009;9(3):105-10.