THE DESIGN OF STANDALONE PV SYSTEM USING P&O ALGORITHM FOR MAXIMUM POWER POINT TRACKING

Year 2020, Volume: 62 Issue: 1, 14 - 25, 30.06.2020

Kenan Özel , Ahmet Karaarslan

https://doi.org/10.33769/aupse.559971

Abstract

This paper presents the
simulation of output power control of photovoltaic panel using Maximum Power
Point Tracking (MPPT) controller of boost converter. Due to the stochastic
behavior of temperature and irradiation condition, integrating a MPPT algorithm
to DC-DC converter is important for extracting the maximum power from
photovoltaic system. The Perturb and Observe (P&O) algorithm has been
preferred due to its lower complexity and easy implementation. The main aim of
this study is to track the maximum operation point of photovoltaic system and
to control the output power with respect to the changing irradiation and
temperature. The simulation results demonstrate that MPPT controller prevents
the power deviation and provide to extract maximum possible power from solar
array. 

Keywords

MPPT, DC-DC Converter, P and Q algorithm

References

• G.J.G. Jothi, N. Geetha, “An Enhanced MPPT Technique for High Gain DC-DC Converter for Photovoltaic Applications”, 2016 International Conference On Circuit, Power And Computing Technologies [ICCPCT], 2016 IEEE, 2016.
• A. Haque, “Maximum Power Point Tracking (MPPT) Scheme for Solar Photovoltaic System”, Energy Technology& Policy (2014) Published with License by Taylor & Francis Group LLC, 2014, pp. 115-122.
• M. Bodur, M. Ermiş, “Maximum Power Point Tracking for Low Power Photovoltaic Solar Panels”, IEEE Electrotechnical Conference Proc, 1994, pp. 758-761.
• A. Attou, A. Massoum, M. Saidi, “Photovoltaic Power Control Using MPPT And Boost Converter”, Balkan Journal of Electrical&Computer Engineering, 2014, vol. 2, no. 1, pp.23-27.
• T. Salmi, M. Bouzguenda, "Matlab/Simulink based modelling of solar photovoltaic cell", International Journal of Renewable Energy Research, Vol. 2, no. 2, 2012.
• N. Mhiri, A. Alahdal, H. Ghulman, A. Ammous, “A Novel Analog Circuit Design for Maximum Power Point Tracking Of Photovoltaic Panels”, Advances in Power Electronics, 2017, pp. 1-9.
• T. Chaitanya, Ch. Saibabu, “Modeling and Simulation of PV Array and its Performance Enhancement Using MPPT (P&O) Technique”, International Journal of Computer Science & Communication Networks,Vol 1(1), 2011.
• S. Sholapur, K.R. Narsimhegowda, “Boost Converter Topology for PV System with Perturb And Observe MPPT Algorithm”, IOSR Journal Of Electrical And Electronics Engineering (IOSR-JEEE), vol.9, no. 4, 2014, pp.50-56.
• M. Ferchichi, N. Zaidi, A. Khedher, “Comparative Analysis for Various Control Strategies Based MPPT Technique of Photovoltaic System Using DC-DC Boost Converter”, 17th International Conference on Sciences and Techniques Of Automatic Control & Computer Engineering- STA’2016, 2016 IEEE, 2016, pp.532-539.
• H. Bounechba, A. Bouzid, K. Nebti, H. Benalla, “Modeling and Simulation of Perturb and Observe MPPT Algorithm For Pv Systems”, International Conference STA’2013.
• M. G. Villalva, J. R. Gazoli, E. R. Filho, “A Study of Maximum Power Point Tracking Algorithms for Stand-alone Photovoltaic Systems”, IEEE Applied Power Electronics Colloquium (IAPEC) 2011.
• M. S. Ngan, C. W. Tan, “Analysis ans Simulation of The P&O Algorithm Using A Linearized PV Array Model”, IECON’09 Industrial Electronics Conference, 2009. P.P. 231-236.
• M. Z. Erel, M. Özev, A. Karaarslan, “The Comparison of OCC and PI Control Method for DC-DC Boost Converter”, IATS’17 8th International Advanced Technologies Symposium, 2017.