Advantages of the Walsh Functions in the Measurement of Reactive Power in the Electric Power Systems

Year 2014, Volume: 2 Issue: 2, 55 - 62, 01.06.2014

A. N. Abiyev

Abstract

—In this paper a reactive power (RP) measurement method is proposed. Application of Walsh function (WF) based algorithms allowed to simplify the multiplication operations required for the evaluation the RP in the single-phase and threephase power systems. One of the unique advantage of the used method is toe eliminate the phase shift operation between the voltage and current signals that is required foe measurement of RP. Limitations and proposals for future performance enhancements of the analyzed algorithms are also discussed. The simulations performed by use of Matlab 6.5 environment have confirmed the validity of the algorithms for measuring of RP in power systems. The simulation results have demonstrated the advantages of Walsh functions in that the computational demands is substantially reduced

Keywords

-

References

• Branislav Djokic, Eddy So, and Petar Bosnjakovic. “A High Performance Frequency Insensitive Quadrature Phase Shifter and Its Application in Reactive Power Measurements”, IEEE Trans. Instrum. Meas.,Vol. 49, February 2000, pp.161-165.
• W.-K. Yoon and M.J. Devaney. “Reactive Power Measurement Usinq the Wavelet Transform”, IEEE Trans. Instrum. Meas.,Vol. 49, April 2000, pp.246-252.
• S.L.Toral, J.M.Quero and L.G.Franquelo. “Reactive power and energy measurement in the frequency domain using random pulse arithmetic”, IEE Proc.-Sci. Technol., Vol. 148, No. 2, March 2001, pp.63-67.
• T.W.S.Chow and Y.F.Yam. “Measurement and evaluation of instantaneous reactive power using neural networks”, IEEE Transactions on Power Delivery, Vol. 9, No. 3, July 1994, pp.1253- 1260.
• A. Ozdemir and A. Ferikoglu. “ Low cost mixed-signal microcontroller based power measurement technique”, IEE Proc.-Sci. Meas. Technol., Vol. 151, No. 4, July 2004, pp.253-258.
• A. Brandolini, A. Gandelli, F. Veroni, “Energy meter testing based on Walsh transform algorithms”, Instrumentation and Measurement Technology Conference, 1994. Conference roceedings, Vol.3, 10-12 May 1994, pp.1317-1320,
• Bai liyun, Wen biyang, Shen wei, and Wan xianrong. “Sample rate conversion using Walsh-transform for radar receiver”, Microwave Conference Proceedings, 2005. APMC 2005. Asia-Pacific Conference Proceedings.Volume 1, 4-7 Dec. 2005.
• IEEE Std. 1459-2000, “IEEE Trial Use Standard Definitions for the Measurement of Electric Power Quantities Under Sinusoidal, Non- Sinusoidal, Balanced, or Unbalanced Conditions”, Institute of Electrical and Electronics Engineers / 01-May-2000 / 52 pages.
• Trachtman A.M., Trachtman V.A. Fundamentals of the discrete signals’ theory on the finite intervals. - M.: Sov. Radio, 1975. -208 p.
• A.N. Abiyev, “A new signal processing technique for measurement of the reactive power in the power transmission and distribution systems”, Southeastcon 2009, IEEE, Hantsville, AL, USA, pp.356-361.
• A.N. Abiyev, “A new electronic reactive power meter based on Walsh Transform algorithms”, IEEE Transmission and Distribution Conference and Exposition, 2009 (T&D. IEEE/PES). Chicago, IL, USA, pp. 1-7.
• A.N. Abiyev, “A New Signal Processing based Method for Reactive Power Measurements”, Journal Of Computers, Vol. 4, No. 7, pp.623- 630, [doi:10.4304/jcp.4.7.623-630].
• P. Carbone and D. Petri, ”Average power estimation under nonsinusoidal conditions”, IEEE Trans. Instrum. Meas., Vol. 49, No 2, Apr. 2000, pp. 333–336.
• A.N.Abiyev, I.M. Aliyev, “An Electric Power Measurement Based On Discrete Walsh Transformation”, Proceedings of the International Conference Interactive Systems: The Problems Of Human-Computer Interaction, 23-27 September 2003, Ulyanovsk, Russia, pp.195-196.
• A.N. Abiyev, “The Walsh Function Based Electric Power Measuring Method”, Proceedings of the 3rd International Symposium on Electrical, Electronics, and Computer Engineering, November 23-25, 2006. Nicosia, North Cyprus, pp.177-181.
• A.N. Abiyev, “Frequency Insensitive Digital Sampler and Its Application to the Electronic Reactive Power Meter”, In: Tarek, S. (Ed.), Advances in Computer and Information Sciences and Engineering. Publisher: Springer Netherlands, Netherlands, 2008, pp. 21-26.