Research Article
BibTex RIS Cite

Design and Implementation of A Test Device for Determining the Capacity of Industrial Battery Banks

Year 2020, Volume: 8 Issue: 4, 348 - 354, 30.10.2020
https://doi.org/10.17694/bajece.689724

Abstract

In this study, a test device is developed to measure the capacities and performances of high capacity battery banks and to detect broken cells. Through this test device, the instant capacity of the battery banks is measured. Based on the data obtained, both quantitative information about the health of the battery bank is provided and it is determined whether the battery bank will meet the need according to its intended use. In addition, battery banks can be divided into small groups and their measurements can be made so that broken cells can be detected.

Supporting Institution

Karamanoglu Mehmetbey University Academic Research Projects Units

Project Number

28-YL-19

Thanks

This study is supported by Karamanoglu Mehmetbey University Academic Research Projects Units, under grant as 28-YL-19 project number.

References

  • [1] I. Sefa, S. Balci, N. Altin, and S. Ozdemir, Comprehensive analysis of inductors for an interleaved buck converter. 2012, pp. DS2b.5-1. [2] T. Blank, J. Badeda, J. Kowal, and D. Sauer, Deep discharge behavior of lead-acid batteries and modeling of stationary battery energy storage systems. 2012. [3] E. Oguz, H. Çimen, and Y. Oğuz, "Simulation and Power Flow Control Using Switching’s Method of Isolated Wind-Solar Hybrid Power Generation System with Battery Storage," Balkan Journal of Electrical and Computer Engineering, pp. 40-49, 09/01 2017, doi: 10.17694/bajece.334348. [4] N. Altin, S. Balci, S. Ozdemir, and I. Sefa, "A comparison of single and three phase DC/DC converter structures for battery charging," in 2013 International Conference on Renewable Energy Research and Applications (ICRERA), 20-23 Oct. 2013 2013, pp. 1228-1233, doi: 10.1109/ICRERA.2013.6749939. [5] M. Kiel, D.-U. Sauer, P. Turpin, M. Naveed, and E. Favre, "Validation of single frequency Z measurement for standby battery state of health determination," INTELEC 2008 - 2008 IEEE 30th International Telecommunications Energy Conference, pp. 1-7, 2008. [6] H. K. Scholl, "Automatic battery tester with recording means for battery performance," ed: Google Patents, 1971. [7] N. C. Berglund, T. J. Rosedahl, and S. W. Steele, "Battery capacity test and electronic system utilizing same," ed: Google Patents, 1997. [8] K. I. Bertness, "Method and apparatus for auditing a battery test," ed: Google Patents, 2000. [9] G. D. Brink and D. L. Burton, "Battery capacity test method and apparatus," ed: Google Patents, 2000. [10] A. H. Anbuky and P. E. Pascoe, "Battery capacity measurement," ed: Google Patents, 2005. [11] M. Coleman, W. G. Hurley, and C. K. Lee, "An Improved Battery Characterization Method Using a Two-Pulse Load Test," IEEE Transactions on Energy Conversion, vol. 23, no. 2, pp. 708-713, 2008, doi: 10.1109/TEC.2007.914329. [12] M. B. Bayram, I. Sefa, and S. Balci, "A static exciter with interleaved buck converter for synchronous generators," International Journal of Hydrogen Energy, vol. 42, no. 28, pp. 17760-17770, 2017/07/13/ 2017, doi: https://doi.org/10.1016/j.ijhydene.2017.03.062. [13] S. Ozdemir, S. Balci, N. Altin, and I. Sefa, "Design and performance analysis of the three-level isolated DC-DC converter with the nanocyrstalline core transformer," International Journal of Hydrogen Energy, vol. 42, no. 28, pp. 17801-17812, 2017/07/13/ 2017, doi: https://doi.org/10.1016/j.ijhydene.2017.02.158. [14] F. Asadi and K. Eguchi, "On the extraction of input and output impedance of PWM DC-DC converters," Balkan Journal of Electrical and Computer Engineering, vol. 7, 04/30 2019, doi: 10.17694/bajece.468787. [15] R. Bououd and S. Lassaad, An overview of chopper topologies. 2017, pp. 1-7. [16] SANREX. "SQD300AA100 Transistor Module." https://www.digchip.com/datasheets/download_datasheet.php?id=919058&part-number=SQD300AA100 (accessed 2019). [17] Altium. "Altium Designer." https://www.altium.com/altium-designer/ (accessed 2020). [18] Microchip. "Microchip." https://www.microchip.com/ (accessed 2020). [19] Microchip. "PIC18F46K22 Microcontroller." https://www.microchip.com/wwwproducts/en/PIC18F46K22#additional-features (accessed 2020). [20] Nextion. "Home - Nextion." https://nextion.tech/ (accessed 2020). [21] Nextion. "NX8048k070 - Nextion." https://nextion.tech/datasheets/nx8048k070/ (accessed 2020). [22] Nextion. "Nextion Editor." https://nextion.tech/nextion-editor/#section1 (accessed 2020). [23] Electropaedia. "Battery Testing." https://www.mpoweruk.com/testing.htm (accessed 2019). [24] Electropaedia. "State of Charge (SOC) Determination." https://www.mpoweruk.com/soc.htm (accessed 2019). [25] Electropaedia. "State of Health (SOH) Determination." https://www.mpoweruk.com/soh.htm (accessed 2019). [26] M. Team, "A guide to understanding battery specifications," 2008.
Year 2020, Volume: 8 Issue: 4, 348 - 354, 30.10.2020
https://doi.org/10.17694/bajece.689724

Abstract

Project Number

28-YL-19

References

  • [1] I. Sefa, S. Balci, N. Altin, and S. Ozdemir, Comprehensive analysis of inductors for an interleaved buck converter. 2012, pp. DS2b.5-1. [2] T. Blank, J. Badeda, J. Kowal, and D. Sauer, Deep discharge behavior of lead-acid batteries and modeling of stationary battery energy storage systems. 2012. [3] E. Oguz, H. Çimen, and Y. Oğuz, "Simulation and Power Flow Control Using Switching’s Method of Isolated Wind-Solar Hybrid Power Generation System with Battery Storage," Balkan Journal of Electrical and Computer Engineering, pp. 40-49, 09/01 2017, doi: 10.17694/bajece.334348. [4] N. Altin, S. Balci, S. Ozdemir, and I. Sefa, "A comparison of single and three phase DC/DC converter structures for battery charging," in 2013 International Conference on Renewable Energy Research and Applications (ICRERA), 20-23 Oct. 2013 2013, pp. 1228-1233, doi: 10.1109/ICRERA.2013.6749939. [5] M. Kiel, D.-U. Sauer, P. Turpin, M. Naveed, and E. Favre, "Validation of single frequency Z measurement for standby battery state of health determination," INTELEC 2008 - 2008 IEEE 30th International Telecommunications Energy Conference, pp. 1-7, 2008. [6] H. K. Scholl, "Automatic battery tester with recording means for battery performance," ed: Google Patents, 1971. [7] N. C. Berglund, T. J. Rosedahl, and S. W. Steele, "Battery capacity test and electronic system utilizing same," ed: Google Patents, 1997. [8] K. I. Bertness, "Method and apparatus for auditing a battery test," ed: Google Patents, 2000. [9] G. D. Brink and D. L. Burton, "Battery capacity test method and apparatus," ed: Google Patents, 2000. [10] A. H. Anbuky and P. E. Pascoe, "Battery capacity measurement," ed: Google Patents, 2005. [11] M. Coleman, W. G. Hurley, and C. K. Lee, "An Improved Battery Characterization Method Using a Two-Pulse Load Test," IEEE Transactions on Energy Conversion, vol. 23, no. 2, pp. 708-713, 2008, doi: 10.1109/TEC.2007.914329. [12] M. B. Bayram, I. Sefa, and S. Balci, "A static exciter with interleaved buck converter for synchronous generators," International Journal of Hydrogen Energy, vol. 42, no. 28, pp. 17760-17770, 2017/07/13/ 2017, doi: https://doi.org/10.1016/j.ijhydene.2017.03.062. [13] S. Ozdemir, S. Balci, N. Altin, and I. Sefa, "Design and performance analysis of the three-level isolated DC-DC converter with the nanocyrstalline core transformer," International Journal of Hydrogen Energy, vol. 42, no. 28, pp. 17801-17812, 2017/07/13/ 2017, doi: https://doi.org/10.1016/j.ijhydene.2017.02.158. [14] F. Asadi and K. Eguchi, "On the extraction of input and output impedance of PWM DC-DC converters," Balkan Journal of Electrical and Computer Engineering, vol. 7, 04/30 2019, doi: 10.17694/bajece.468787. [15] R. Bououd and S. Lassaad, An overview of chopper topologies. 2017, pp. 1-7. [16] SANREX. "SQD300AA100 Transistor Module." https://www.digchip.com/datasheets/download_datasheet.php?id=919058&part-number=SQD300AA100 (accessed 2019). [17] Altium. "Altium Designer." https://www.altium.com/altium-designer/ (accessed 2020). [18] Microchip. "Microchip." https://www.microchip.com/ (accessed 2020). [19] Microchip. "PIC18F46K22 Microcontroller." https://www.microchip.com/wwwproducts/en/PIC18F46K22#additional-features (accessed 2020). [20] Nextion. "Home - Nextion." https://nextion.tech/ (accessed 2020). [21] Nextion. "NX8048k070 - Nextion." https://nextion.tech/datasheets/nx8048k070/ (accessed 2020). [22] Nextion. "Nextion Editor." https://nextion.tech/nextion-editor/#section1 (accessed 2020). [23] Electropaedia. "Battery Testing." https://www.mpoweruk.com/testing.htm (accessed 2019). [24] Electropaedia. "State of Charge (SOC) Determination." https://www.mpoweruk.com/soc.htm (accessed 2019). [25] Electropaedia. "State of Health (SOH) Determination." https://www.mpoweruk.com/soh.htm (accessed 2019). [26] M. Team, "A guide to understanding battery specifications," 2008.
There are 1 citations in total.

Details

Primary Language English
Subjects Electrical Engineering
Journal Section Araştırma Articlessi
Authors

Zeki Zürey 0000-0003-4219-1274

Kadir Sabancı 0000-0003-0238-9606

Selami Balcı 0000-0002-3922-4824

Project Number 28-YL-19
Publication Date October 30, 2020
Published in Issue Year 2020 Volume: 8 Issue: 4

Cite

APA Zürey, Z., Sabancı, K., & Balcı, S. (2020). Design and Implementation of A Test Device for Determining the Capacity of Industrial Battery Banks. Balkan Journal of Electrical and Computer Engineering, 8(4), 348-354. https://doi.org/10.17694/bajece.689724

All articles published by BAJECE are licensed under the Creative Commons Attribution 4.0 International License. This permits anyone to copy, redistribute, remix, transmit and adapt the work provided the original work and source is appropriately cited.Creative Commons Lisansı