Mining activities are followed by mineral processing and wet beneficiation methods which generate a significant amount of tailings. Slime fractions are discharged to the tailing ponds with associated process water and this causes storage and disposal difficulties and creates severe environmental problems. Therefore, dewatering these tailings is necessary for both economic and environmental aspects. In this study, the flocculation behaviors of the boron tailings from Agildere and Hisarcik (Turkey) were studied in the presence of anionic, cationic, and non-ionic flocculants. The results showed that the free settling condition was optimum for the Agildere sample. On the contrary, the settling rate of the Hisarcik sample increased considerably by the use of flocculants with a significant decrease in the turbidity of the suspension. Flocculation experiments indicated that the effect of the flocculant type on the flocculation of the Hisarcik sample can be generally ordered as anionic>cationic>non-ionic>no-flocculant. Furthermore, ultrasound was used as a supporting application. The results indicated that although the ultrasound application decreased the settling rate of both samples, lower sediment bed heights were obtained for the Hisarcik sample with ultrasound because of the formation of a more compact sediment bed in the presence of ultrasound.
Research Fund of Istanbul University
FBA-2017-25533
This paper was supported by the Research Fund of Istanbul University, project number: FBA-2017-25533.
Madencilik faaliyetlerini, önemli miktarda atık oluşturan maden işleme ve yaş zenginleştirme yöntemleri izlemektedir. Şlam fraksiyonları, proses suyu ile birlikte atık havuzlarına boşaltılır ve bu depolama ve bertaraf zorluklarına neden olur ve ciddi çevre sorunları yaratır. Bu nedenle, bu atıkların susuzlaştırılması hem ekonomik hem de çevresel açılardan gereklidir. Bu çalışmada, Ağıldere ve Hisarcık (Türkiye) bor atıklarının anyonik, katyonik ve iyonik olmayan flokülantlar varlığında flokülasyon davranışları incelenmiştir. Sonuçlar, Ağıldere numunesi için serbest çökme koşulunun optimum olduğunu göstermiştir. Diğer taraftan Hisarcık numunesinin çökelme hızı, flokülant kullanımı ile süspansiyon bulanıklığında önemli bir azalma da göstererek önemli ölçüde artmıştır. Flokülasyon deneyleri, flokülant tipinin Hisarcık numunesinin flokülasyonuna etkisinin genel olarak anyonik>katyonik>iyonik olmayan>flokülantsız olarak sıralanabileceğini göstermiştir. Çalışmada ayrıca ultrason destekleyici bir uygulama olarak kullanılmıştır. Sonuçlar, ultrason uygulamasının her iki numunenin de çökme hızını azaltmasına rağmen, ultrason varlığında daha kompakt bir çökelti yatağı oluşması nedeniyle Hisarcık numunesinde ultrason varlığında daha düşük çökelti yatağı yükseklikleri elde edildiğini göstermiştir.
FBA-2017-25533
Primary Language | English |
---|---|
Subjects | Engineering |
Journal Section | Research Article |
Authors | |
Project Number | FBA-2017-25533 |
Publication Date | September 30, 2021 |
Acceptance Date | August 22, 2021 |
Published in Issue | Year 2021 Volume: 6 Issue: 3 |
© 2016 All Rights Reserved
TENMAK Boron Research Institute