Abstract
Bu çalışma, uçucu kül (FA) içeriğinin ve kür sıcaklığının Jeopolimer Harcın (GPLM) basınç dayanımı üzerindeki etkisini araştırmaktadır. GPLM, alkali çözelti ile karıştırılmış FA'dan üretilir. Deneysel test, bir günlük kürlenme süresi ile 70, 90 ve 110 ° C kürleme sıcaklığı ile GPLM küpleri üzerinde gerçekleştirilmiştir. Alkalin aktivatör, 12M NaOH çözeltisinin 1: 2.5 oranında sodyum silikat ile bir kombinasyonuydu. Alkali çözeltinin bağlayıcıya oranı 0,50'ye eşittir. Test sonuçları, FA içeriğindeki artışın GPLM'nin basınç dayanımını artırdığını göstermektedir. GPLM'nin kürleme sıcaklığının artmasıyla mukavemet artar. Ayrıca, yüksek oranda uçucu kül içeren harmanlanmış GPLM daha az sorptiviteye sahiptir.
Keywords
References
- Mccaffrey, R. (2002). Climate change and the cement industry, Global cement and lime magazine (environmental special issue), 15-19.
- Davidovits, J. (1994). Properties of Geopolymer Cements. In Kiev (Ed.), First International Conference on Alkaline Cements and Concretes, 1, 131-149.
- Davidovits, J. (1988a). Geopolymer Chemistry and Properties, Paper presented at the Geopolymer ’88, First European Conference on Soft Mineralurgy, Compiegne, Franc.
- Davidovits, J. (1988b). Geopolymers of the First Generation: SILIFACE-Process Paper presented at the Geopolymer ’88, First European Conference on Soft Mineralurgy, Compiegne, France.
- Temuujin, J., van Riessen, A., & MacKenzie, K. J. D. (2010). Preparation and characterisation of fly ash based geopolymer mortars. Construction and Building Materials, 24 (10), 1906-1910.
- Van Jaarsveld, J. G. S., Van Deventer, J. S. J., & Lukey, G. C. (2003). The characterisation of source materials in fly ash-based geopolymers. Materials Letters, 57 (7), 1272-1280.
- Neville, A.M. (2000). Properties of Concrete. Longman scientific and Technical
Abstract
This study investigates the effect of fly ash (FA) class F content and curing temperature on the compressive strength of Geopolymer Mortar (GPLM). GPLM is produced from FA mixed with the alkaline solution. The experimental test was performed on GPLM cubes with curing temperature of 70, 90 and 110 °C with curing period of one day. The alkaline activator was a combination of 12M NaOH solution with sodium silicate in the ratio of 1:2.5. The ratio of alkaline solution to binder equal to 0.50. Test results indicate that the increment in the FA content increases the compressive strength of GPLM. The strength increases with the increase of curing temperature of GPLM. Moreover, blended GPLM with high percentage of fly ash has less sorptivity.
Keywords
References
- Mccaffrey, R. (2002). Climate change and the cement industry, Global cement and lime magazine (environmental special issue), 15-19.
- Davidovits, J. (1994). Properties of Geopolymer Cements. In Kiev (Ed.), First International Conference on Alkaline Cements and Concretes, 1, 131-149.
- Davidovits, J. (1988a). Geopolymer Chemistry and Properties, Paper presented at the Geopolymer ’88, First European Conference on Soft Mineralurgy, Compiegne, Franc.
- Davidovits, J. (1988b). Geopolymers of the First Generation: SILIFACE-Process Paper presented at the Geopolymer ’88, First European Conference on Soft Mineralurgy, Compiegne, France.
- Temuujin, J., van Riessen, A., & MacKenzie, K. J. D. (2010). Preparation and characterisation of fly ash based geopolymer mortars. Construction and Building Materials, 24 (10), 1906-1910.
- Van Jaarsveld, J. G. S., Van Deventer, J. S. J., & Lukey, G. C. (2003). The characterisation of source materials in fly ash-based geopolymers. Materials Letters, 57 (7), 1272-1280.
- Neville, A.M. (2000). Properties of Concrete. Longman scientific and Technical
Details
| Primary Language | English |
|---|---|
| Subjects | Engineering |
| Journal Section | Articles |
| Authors | |
| Publication Date | August 31, 2021 |
| Published in Issue | Year 2021 Issue: 25 |
