Makine ve metal üretim sektörünün vazgeçilmez parçaları olan takım tezgahları sektörde sıklıkla kullanılmaktadır. Sektördeki işyerleri faaliyetleri bakımından tehlikeli ve çok tehlikeli sınıflarda yer almaktadır ve dolayısıyla üretimin yapıldığı takım tezgahlarında sıklıkla iş kazaları ve meslek hastalıklarının meydana gelmesi kaçınılmaz bir hale gelmektedir. Bu nedenle, takım tezgahlarında hali hazırda var olan ve kullanımdan kaynaklı fiziksel, kimyasal ve ergonomik riskleri en aza indirebilmek ve sektörde iş sağlığı ve güvenliği iklimini yerleştirebilmek adına risk değerlendirmesi en önemli gereksinim haline gelmiştir. Bu çalışmada bir üniversite laboratuvarında kullanılan, sektörde üretimin büyük kısmının gerçekleştirildiği ve dolayısıyla en sık kullanılan takım tezgahlarından biri olan universal ve CNC (Computer Numerical Control) kontrollü freze tezgahları ele alınmış ve sektörde en sık kullanılan risk değerlendirme yöntemlerinden olan Fine-Kinney yöntemi ile risk değerlendirmesi yapılmıştır. Toplamda 23 adet risk tespit edilmiş, mevcut tehlikelerin önlenmesi ve risklerin azaltılması için gerekli düzeltici/önleyici faaliyetler açıklanmış ve çözüm önerileri sunulmuştur. Yapılan bu çalışma ile sektörde sıklıkla kullanılan freze tezgahlarının hem üretim hem de laboratuvarlarda eğitim amaçlı kullanımında, iş sağlığı ve güvenliği açısından değerlendirilerek, çalışanlara gerekli farkındalığın kazandırılması amaçlanmıştır.
Machine tools, which are indispensable parts of the machinery and metal production sector, are frequently used in the sector. Workplaces in the sector are in dangerous and very dangerous classes in terms of their activities, and therefore, it is inevitable that work accidents and occupational diseases occur frequently in machine tools where production is made. For this reason, risk assessment has become the most important requirement in order to minimize the physical, chemical and ergonomic risks that already exist in machine tools and originate from use, and to establish an occupational health and safety climate in the sector. In this study, universal and CNC (Computer Numerical Control) controlled milling machines, which are used in a university laboratory, where most of the production is carried out in the sector and therefore one of the most frequently used machine tools, are discussed and risk assessment with Fine-Kinney method, which is one of the most frequently used risk assessment methods in the sector has been made. A total of 23 risks have been identified, corrective/preventive actions necessary to prevent existing hazards and reduce risks have been explained and solutions have been presented. With this study, it is aimed to raise the necessary awareness to the employees by evaluating the milling machines, which are frequently used in the sector, both in production and in the laboratories for educational purposes, in terms of occupational health and safety.
Primary Language | English |
---|---|
Journal Section | Articles |
Authors | |
Publication Date | April 15, 2023 |
Submission Date | September 15, 2022 |
Published in Issue | Year 2023 Volume: 6 Issue: 1 |
The journal is published three times a year (April, August and December). In addition to these issues, with the decision of the Editorial Board, the papers presented at the National Ergonomics Congress can be published as "Special Issue".