Research Article
BibTex RIS Cite

SÜPERALAŞIMLAR VE UYGULAMA ALANLARI

Year 2005, Volume: 3 Issue: 2, 178 - 188, 20.03.2005

Abstract




Bu çalışmada süperalaşımlar, özellikleri
ve kullanım alanları araştırılmıştır Süperalaşımlar yüksek sıcaklıklar-da
yüksek metalürjik ve yapısal dirence sahip olmaları nedeniyle havacılık, uçak
ve uzay endüstrisi gibi  endüstriel
üretim alanlarında yaygın olarak kullanılmaktadır. Süperalaşımların en önemli
grubu, Ni esaslı süper alaşımlardır. Diğer önemli süperalaşım grupları ise, Fe
ve Co esaslı olanlardır.




References

  • 1. Adepted from heat treatment, Structure and properties of Nonferrous Alloys, 1982, C.R. Brooks, American Society for Metals.
  • 2. Aerospace Material Specification, 1989, SAE Publication.
  • 3. Babu, S.S., Miller, M.K., Vitek, J.M., David, S.A., 2001, Characterization Of The Microstructure Evolution In A Nickel Base Superalloy During Continuous Cooling Conditions, Metals and Ceramics Division, Oak Ridge National Laboratory, Oak Ridge, TN 37831, USA Acta mater. 49, 4149–4160.
  • 4. Betteridge, W., Heslop, J., 1974, The Nimonic Alloys, and Other Nickel-Base High-TempratureAlloys, New York. 29
  • 5. Bradley, E.F., 1979, Source Book on Materials for Elevated-Temprature Aplicacions, American Society for Metals, Metals Park, OH. 29
  • 6. Bradley, E.F., 1989, Superalloys, ASM International Metals Park, OH 44073.
  • 7. Choudhury, I.A., El-Baradie, M.A., 1998, Machinability of nickel-base super alloys: a general review, Journal of Materials Processing Technology 77 . 278–284 School of Mechanical and Manufacturing Engineering, Dublin City University, Glasnevin, Dublin 9, Ireland
  • 8. Dye, D., Hunziker, O., Roberts, S.M., Reed, R.C., 2001, “Modelling of the Mechanical Effects Induced by the Tungsten Inert Gas Welding of IN718 Superalloy.” Met. Trans., 32A, pp. 1713-1725.
  • 9. Hagel, W.C., Wiley, J., 1972, The Superalloys. New York. 29
  • 10. Hendersona, M.B., Arrellb, D., Heobeld, M., Larsson, R., Marchantc , G., “Nickel-Based Superalloy Welding Practices for Industrial Gas Turbine Applications”. aALSTOM Power Technology Centre, Whetstone, UK, bALSTOM Power Sweden AB, Finspang, Sweden, cALSTOM Power (UK) Ltd., Lincoln, UK, dALSTOM Power Technology Centre, Daettwil, CH.
  • 11. Huang, X., Chaturvedi, M.C., Richards, N.L., 1996, “Effect of Homogenisation heat treatment on the Microstructure and Heat Affected Zone Microfissuring in Welded Cast Alloy IN718.” Met., Trans., A, 27A, pp.785-790.
  • 12. Jean Koster ASEN 4012
  • 13. John Wiley & Sons, 1993, R. Dunker European Commission Aeronautics Research Series, USA Pg.41
  • 14. Lula, R.A., 1986, Stainless Steel, American Society for Metals.7,
  • 15. Loria, E.A., 1992, Recent Development in The Progress of Superalloy 718, JOM 44 (6), 33–36
  • 16. Mattingly, J.D., 1996, Elements of Gas Turbine Propulsion, Mcgrawhill Co.
  • 17. Nikel Magazin, 2001, Eylül 1.
  • 18. www.google.com /superalloys
  • 19. www.nasa.gov
  • 20. www.EJ200.com
  • 21. www.tms.org
Year 2005, Volume: 3 Issue: 2, 178 - 188, 20.03.2005

Abstract

References

  • 1. Adepted from heat treatment, Structure and properties of Nonferrous Alloys, 1982, C.R. Brooks, American Society for Metals.
  • 2. Aerospace Material Specification, 1989, SAE Publication.
  • 3. Babu, S.S., Miller, M.K., Vitek, J.M., David, S.A., 2001, Characterization Of The Microstructure Evolution In A Nickel Base Superalloy During Continuous Cooling Conditions, Metals and Ceramics Division, Oak Ridge National Laboratory, Oak Ridge, TN 37831, USA Acta mater. 49, 4149–4160.
  • 4. Betteridge, W., Heslop, J., 1974, The Nimonic Alloys, and Other Nickel-Base High-TempratureAlloys, New York. 29
  • 5. Bradley, E.F., 1979, Source Book on Materials for Elevated-Temprature Aplicacions, American Society for Metals, Metals Park, OH. 29
  • 6. Bradley, E.F., 1989, Superalloys, ASM International Metals Park, OH 44073.
  • 7. Choudhury, I.A., El-Baradie, M.A., 1998, Machinability of nickel-base super alloys: a general review, Journal of Materials Processing Technology 77 . 278–284 School of Mechanical and Manufacturing Engineering, Dublin City University, Glasnevin, Dublin 9, Ireland
  • 8. Dye, D., Hunziker, O., Roberts, S.M., Reed, R.C., 2001, “Modelling of the Mechanical Effects Induced by the Tungsten Inert Gas Welding of IN718 Superalloy.” Met. Trans., 32A, pp. 1713-1725.
  • 9. Hagel, W.C., Wiley, J., 1972, The Superalloys. New York. 29
  • 10. Hendersona, M.B., Arrellb, D., Heobeld, M., Larsson, R., Marchantc , G., “Nickel-Based Superalloy Welding Practices for Industrial Gas Turbine Applications”. aALSTOM Power Technology Centre, Whetstone, UK, bALSTOM Power Sweden AB, Finspang, Sweden, cALSTOM Power (UK) Ltd., Lincoln, UK, dALSTOM Power Technology Centre, Daettwil, CH.
  • 11. Huang, X., Chaturvedi, M.C., Richards, N.L., 1996, “Effect of Homogenisation heat treatment on the Microstructure and Heat Affected Zone Microfissuring in Welded Cast Alloy IN718.” Met., Trans., A, 27A, pp.785-790.
  • 12. Jean Koster ASEN 4012
  • 13. John Wiley & Sons, 1993, R. Dunker European Commission Aeronautics Research Series, USA Pg.41
  • 14. Lula, R.A., 1986, Stainless Steel, American Society for Metals.7,
  • 15. Loria, E.A., 1992, Recent Development in The Progress of Superalloy 718, JOM 44 (6), 33–36
  • 16. Mattingly, J.D., 1996, Elements of Gas Turbine Propulsion, Mcgrawhill Co.
  • 17. Nikel Magazin, 2001, Eylül 1.
  • 18. www.google.com /superalloys
  • 19. www.nasa.gov
  • 20. www.EJ200.com
  • 21. www.tms.org
There are 21 citations in total.

Details

Primary Language Turkish
Journal Section Articles
Authors

Vedat Veli Çay This is me

Sermin Ozan

Publication Date March 20, 2005
Published in Issue Year 2005 Volume: 3 Issue: 2

Cite

APA Çay, V. V., & Ozan, S. (2005). SÜPERALAŞIMLAR VE UYGULAMA ALANLARI. Fırat Üniversitesi Doğu Araştırmaları Dergisi, 3(2), 178-188.
AMA Çay VV, Ozan S. SÜPERALAŞIMLAR VE UYGULAMA ALANLARI. (DAD). March 2005;3(2):178-188.
Chicago Çay, Vedat Veli, and Sermin Ozan. “SÜPERALAŞIMLAR VE UYGULAMA ALANLARI”. Fırat Üniversitesi Doğu Araştırmaları Dergisi 3, no. 2 (March 2005): 178-88.
EndNote Çay VV, Ozan S (March 1, 2005) SÜPERALAŞIMLAR VE UYGULAMA ALANLARI. Fırat Üniversitesi Doğu Araştırmaları Dergisi 3 2 178–188.
IEEE V. V. Çay and S. Ozan, “SÜPERALAŞIMLAR VE UYGULAMA ALANLARI”, (DAD), vol. 3, no. 2, pp. 178–188, 2005.
ISNAD Çay, Vedat Veli - Ozan, Sermin. “SÜPERALAŞIMLAR VE UYGULAMA ALANLARI”. Fırat Üniversitesi Doğu Araştırmaları Dergisi 3/2 (March 2005), 178-188.
JAMA Çay VV, Ozan S. SÜPERALAŞIMLAR VE UYGULAMA ALANLARI. (DAD). 2005;3:178–188.
MLA Çay, Vedat Veli and Sermin Ozan. “SÜPERALAŞIMLAR VE UYGULAMA ALANLARI”. Fırat Üniversitesi Doğu Araştırmaları Dergisi, vol. 3, no. 2, 2005, pp. 178-8.
Vancouver Çay VV, Ozan S. SÜPERALAŞIMLAR VE UYGULAMA ALANLARI. (DAD). 2005;3(2):178-8.