Research Article
BibTex RIS Cite

AŞINMA SİSTEMLERİ

Year 2006, Volume: 4 Issue: 2, 86 - 91, 30.03.2006

Tülay Yıldız Ali Kaya Gür

Abstract




Aşınma, bir birleşme yüzeyi
ile etkileşim içinde olan bir yüzeyden materyalin uzaklaştırılmasının olgusu anlamında
kabul edilmektedir. Son yıllarda hemen hemen bütün makineler, dayanıklılıkları,
aşınmayla ilgili olarak emniyet kaybı ve makinelerin aşınma problemleri
minimuma indirgenmeye çalışılmaktadır. Dola-yısıyla, aşınmanın kontrolü,
geleceğin ileri ve güvenilir teknolojisi için, güçlü bir gereksinim haline
gelmiştir.




 




Bu çalışmada; aşınma
sistemleri hakkında bilgi verilmiştir.




Keywords

Aşınma Adhesive Abrasive Yorulma Korozyon

References

  • 1. Gür A.K. (2006) Aşınma Mekanizmaları, F.Ü. Fen Bilimleri Ens. Doktora Semineri, Elazığ
  • 2. Chiou, Y.C., Kato, K., and Kayaba, T. (1985), Effect of Normal Stiffness in Loading System on Wear of Carbon Steel—part 1:Severe-Mild Wear Transition, ASME, J. Tribology, 107, 491-495.
  • 3. Cho, S.J., Hockey, B.J., and Lawn, B.R. (1989), Grain-size and R-curve Effects in the Abrasive Wear of Alumina, J. Am. Ceram. Soc., 72, 7, 1949-1952.
  • 4. Archard, J.F. (1953), Contact and Rubbing of Flat Surfaces, J. Appl. Phys., 24, 981-988.
  • 5. Bayer, R.G. (1994), Mechanical Wear Prediction and Prevention, Marcel Dekker, New York, 280.
  • 6. Burwell, J.T. (1957/58), Survey of Possible We-ar Mechanisms, Wear, 1, 119–141.
  • 7. Özel, S.(2004) Cu-Sn-Zn-Al Bronz Alaşımlı Yü-zeyine Ferromangan Kaplamasının Aşınma Di-rencine Etkisinin Deneysel Olarak Araştırılması, Yüksek Lisans Tezi F.Ü. Fen Bil.Enst. Elazığ
  • 8. Koji KATO, Koshi ADACHİ, Chapter 7, Wear Mechanism. Modern Tribology Handbook
  • 9. Koç, R;Mutlu, İ 2005) Recep KOÇ, İbrahim MUTLU(2005) Poli-Oksi-Metilen (Pom) Ve Kompozitlerinin Abrasiv Aşınma Davranışları, Teknoloji Dergisi, Sayı2, 199–205
  • 10. Y. Sahin, ;(2005) Optimal testing parameters on the wear behaviour of various steels; Materials and Design ..455-460
  • 11. Hokkirigawa, K. and Kato, K. (1988), An Expe-rimental and Theoretical İnvestigation of Ploug-hing, Cuttingand Wedge Formation During Ab-rasive Wear, Tribology Int., 21, 1, 51-57.
  • 12. Khruschov, M.M. (1974), Principles of Abrasive Wear, Wear, 28, 69–88.
  • 13. Rabinowicz, E. (1980), Wear Coefficients – Me-tals, Wear Control Handbook, Peterson, M.B. and Winer, W.O. (Eds.), ASME, 475.
  • 14. Challen, J.M. and Oxley, P.L.B. (1979), An Explanation of The Different Regimes of Friction and Wear Using Asperity Deformation Models, Wear, 53, 229–243.
  • 15. Xianqiang Pei, Qihua Wang, Jianmin Chen; (2005) Tribological responses of Phenolphtha-lein Poly (ether sulfone) on proton irradiation; Elsevier, Wear, 719-724
  • 16. Lundberg, G. and Palmgren, A. (1952), Dynamic Capacity of Roller Bearings, Ingenicorsrenten-Skapsakademiens,Nr. 210.
  • 17. Weibull, W. (1930), A Statistical Theory of The Strength of Materials, IVA Handlinger, (Royal Swedish Academy of Engineering Sciences, Proceedings) Nr. 151.
  • 18. Dufrane, K.F. and Glaeser, W.A. (1976), Rolling-Contact Deformation of MgO Single Crystals, Wear, 37,21–32.
  • 19. Challen, J.M., Oxley, P.L.B., and Hockenhull, B.S. (1986), Prediction of Archard’s Wear Coefficient For Metallic Sliding Friction Assuming a Low Cycle Fatigue Wear Mechanism, Wear, 111, 275-288.
  • 20. Eren, H. (2005) Ferritik Paslanmaz Çeliğin Ko-rozyon Davranışına Karbür Yapıcı Alaşım Ele-mentlerinin Etkilerinin İncelenmesi, Doktora Tezi F.Ü. Fen Bil. Enst. Elazığ
  • 21. X.Y. Wang, D.Y. Li; (2005) Application of an electrochemical scratch technique to evaluate contributions of mechanical and electrochemical attacks to corrosive wear of materials, Elsevier; Waer; 1490-1496
  • 22. Quinn, T.F.J. (1987), in Proc. Int. Conf. on Tribology-Friction, Wear and Lubrication, Inst. Mech. Engrs.Conf. Series, 253–259.
  • 23. Fischer, T.E. and Tomizawa, H. (1985), Interaction of Tribochemistry and Microfracture in the Frictionand Wear of Silicon Nitride, Wear, 105, 29–45.
  • 24. Kitaoka, S., Tsuji, T., Yamaguchi, Y., and Kas-hiwagi, K. (1997), Tribochemical Wear Theory of non-oxide Ceramics in High-Temperature And High-Pressure Water, Wear, 205, 40-46.

Year 2006, Volume: 4 Issue: 2, 86 - 91, 30.03.2006

Tülay Yıldız Ali Kaya Gür

Abstract

References

  • 1. Gür A.K. (2006) Aşınma Mekanizmaları, F.Ü. Fen Bilimleri Ens. Doktora Semineri, Elazığ
  • 2. Chiou, Y.C., Kato, K., and Kayaba, T. (1985), Effect of Normal Stiffness in Loading System on Wear of Carbon Steel—part 1:Severe-Mild Wear Transition, ASME, J. Tribology, 107, 491-495.
  • 3. Cho, S.J., Hockey, B.J., and Lawn, B.R. (1989), Grain-size and R-curve Effects in the Abrasive Wear of Alumina, J. Am. Ceram. Soc., 72, 7, 1949-1952.
  • 4. Archard, J.F. (1953), Contact and Rubbing of Flat Surfaces, J. Appl. Phys., 24, 981-988.
  • 5. Bayer, R.G. (1994), Mechanical Wear Prediction and Prevention, Marcel Dekker, New York, 280.
  • 6. Burwell, J.T. (1957/58), Survey of Possible We-ar Mechanisms, Wear, 1, 119–141.
  • 7. Özel, S.(2004) Cu-Sn-Zn-Al Bronz Alaşımlı Yü-zeyine Ferromangan Kaplamasının Aşınma Di-rencine Etkisinin Deneysel Olarak Araştırılması, Yüksek Lisans Tezi F.Ü. Fen Bil.Enst. Elazığ
  • 8. Koji KATO, Koshi ADACHİ, Chapter 7, Wear Mechanism. Modern Tribology Handbook
  • 9. Koç, R;Mutlu, İ 2005) Recep KOÇ, İbrahim MUTLU(2005) Poli-Oksi-Metilen (Pom) Ve Kompozitlerinin Abrasiv Aşınma Davranışları, Teknoloji Dergisi, Sayı2, 199–205
  • 10. Y. Sahin, ;(2005) Optimal testing parameters on the wear behaviour of various steels; Materials and Design ..455-460
  • 11. Hokkirigawa, K. and Kato, K. (1988), An Expe-rimental and Theoretical İnvestigation of Ploug-hing, Cuttingand Wedge Formation During Ab-rasive Wear, Tribology Int., 21, 1, 51-57.
  • 12. Khruschov, M.M. (1974), Principles of Abrasive Wear, Wear, 28, 69–88.
  • 13. Rabinowicz, E. (1980), Wear Coefficients – Me-tals, Wear Control Handbook, Peterson, M.B. and Winer, W.O. (Eds.), ASME, 475.
  • 14. Challen, J.M. and Oxley, P.L.B. (1979), An Explanation of The Different Regimes of Friction and Wear Using Asperity Deformation Models, Wear, 53, 229–243.
  • 15. Xianqiang Pei, Qihua Wang, Jianmin Chen; (2005) Tribological responses of Phenolphtha-lein Poly (ether sulfone) on proton irradiation; Elsevier, Wear, 719-724
  • 16. Lundberg, G. and Palmgren, A. (1952), Dynamic Capacity of Roller Bearings, Ingenicorsrenten-Skapsakademiens,Nr. 210.
  • 17. Weibull, W. (1930), A Statistical Theory of The Strength of Materials, IVA Handlinger, (Royal Swedish Academy of Engineering Sciences, Proceedings) Nr. 151.
  • 18. Dufrane, K.F. and Glaeser, W.A. (1976), Rolling-Contact Deformation of MgO Single Crystals, Wear, 37,21–32.
  • 19. Challen, J.M., Oxley, P.L.B., and Hockenhull, B.S. (1986), Prediction of Archard’s Wear Coefficient For Metallic Sliding Friction Assuming a Low Cycle Fatigue Wear Mechanism, Wear, 111, 275-288.
  • 20. Eren, H. (2005) Ferritik Paslanmaz Çeliğin Ko-rozyon Davranışına Karbür Yapıcı Alaşım Ele-mentlerinin Etkilerinin İncelenmesi, Doktora Tezi F.Ü. Fen Bil. Enst. Elazığ
  • 21. X.Y. Wang, D.Y. Li; (2005) Application of an electrochemical scratch technique to evaluate contributions of mechanical and electrochemical attacks to corrosive wear of materials, Elsevier; Waer; 1490-1496
  • 22. Quinn, T.F.J. (1987), in Proc. Int. Conf. on Tribology-Friction, Wear and Lubrication, Inst. Mech. Engrs.Conf. Series, 253–259.
  • 23. Fischer, T.E. and Tomizawa, H. (1985), Interaction of Tribochemistry and Microfracture in the Frictionand Wear of Silicon Nitride, Wear, 105, 29–45.
  • 24. Kitaoka, S., Tsuji, T., Yamaguchi, Y., and Kas-hiwagi, K. (1997), Tribochemical Wear Theory of non-oxide Ceramics in High-Temperature And High-Pressure Water, Wear, 205, 40-46.
There are 24 citations in total.

Details

Primary Language Turkish
Journal Section Articles
Authors

Tülay Yıldız

Ali Kaya Gür

Publication Date March 30, 2006
Published in Issue Year 2006 Volume: 4 Issue: 2

Cite

APA Yıldız, T., & Gür, A. K. (2006). AŞINMA SİSTEMLERİ. Fırat Üniversitesi Doğu Araştırmaları Dergisi, 4(2), 86-91.
AMA Yıldız T, Gür AK. AŞINMA SİSTEMLERİ. (DAD). March 2006;4(2):86-91.
Chicago Yıldız, Tülay, and Ali Kaya Gür. “AŞINMA SİSTEMLERİ”. Fırat Üniversitesi Doğu Araştırmaları Dergisi 4, no. 2 (March 2006): 86-91.
EndNote Yıldız T, Gür AK (March 1, 2006) AŞINMA SİSTEMLERİ. Fırat Üniversitesi Doğu Araştırmaları Dergisi 4 2 86–91.
IEEE T. Yıldız and A. K. Gür, “AŞINMA SİSTEMLERİ”, (DAD), vol. 4, no. 2, pp. 86–91, 2006.
ISNAD Yıldız, Tülay - Gür, Ali Kaya. “AŞINMA SİSTEMLERİ”. Fırat Üniversitesi Doğu Araştırmaları Dergisi 4/2 (March 2006), 86-91.
JAMA Yıldız T, Gür AK. AŞINMA SİSTEMLERİ. (DAD). 2006;4:86–91.
MLA Yıldız, Tülay and Ali Kaya Gür. “AŞINMA SİSTEMLERİ”. Fırat Üniversitesi Doğu Araştırmaları Dergisi, vol. 4, no. 2, 2006, pp. 86-91.
Vancouver Yıldız T, Gür AK. AŞINMA SİSTEMLERİ. (DAD). 2006;4(2):86-91.