gujspb Gazi University Journal of Science Part B: Art Humanities Design and Planning 2147-9534 Gazi University Architectural Design Information Technologies in Architecture and Design Sustainable Architecture Mimari Tasarım Mimarlık ve Tasarımda Bilgi Teknolojileri Sürdürülebilir Mimari Mimari Tasarımda Doğal Havalandırma ve Pasif Soğutma: ANSYS Fluent Kullanan CFD Çalışmalarının Sistematik İncelemesi Natural Ventilation and Passive Cooling in Architectural Design: A Systematic Review of CFD Studies Using ANSYS Fluent https://orcid.org/0000-0002-9754-0956 Gökşen Fulya KAHRAMANMARAS SUTCU IMAM UNIVERSITY, FACULTY OF ENGINEERING-ARCHITECTURE 03 31 2026 14 1 137 156 02 20 2026 03 18 2026 Copyright © 2013, Gazi University Journal of Science Part B: Art Humanities Design and Planning 2013 Gazi University Journal of Science Part B: Art Humanities Design and Planning

Pasif tasarım ve doğal havalandırma stratejileri, binalarda enerji tüketimini azaltmak ve ısıl konforu sağlamak açısından önemli bir rol oynamaktadır. Bu stratejilerin başarısı, iklimsel verilerin doğru analiz edilmesine ve tasarım sürecine bütüncül biçimde entegre edilmesine bağlıdır. Bu kapsamda ön tasarım aşamasından itibaren karmaşık aerodinamik ve termodinamik süreçlerin optimize edilmesi için Hesaplamalı Akışkanlar Dinamiği (CFD) simülasyonlarına başvurulmaktadır. Bu yazılımlar arasında ANSYS Fluent, akademik literatürde güvenilirliği ve yaygın kullanımıyla öne çıkmaktadır. Literatürdeki mevcut derleme çalışmaları genellikle pasif tasarım stratejilerini analiz araçlarından bağımsız incelemekte veya birden fazla CFD yazılımını genel bir çerçevede ele almaktadır. Bu çalışma ise yalnızca ANSYS Fluent kullanılarak gerçekleştirilen araştırmalara odaklanmaktadır. Bu doğrultuda, 2020–2025 yılları arasında yayımlanmış, ANSYS Fluent tabanlı doğal havalandırma ve pasif soğutma araştırmalarını mimari ölçekte sistematik bir derleme yöntemiyle incelenmiştir. Çalışmanın amacı; farklı bina tipolojilerindeki havalandırma stratejilerini ortaya koymak, uygulanan CFD yaklaşımlarını tanımlamak, performans göstergelerini belirlemek ve elde edilen tasarım çıktılarını sınıflandırmaktır. Araştırma kapsamında, Web of Science ve Scopus veri tabanlarından seçilen 23 uluslararası hakemli makale; bina tipolojisi, iklim verisi, sınır koşulları ve mimari tasarım çıktıları gibi parametrelerden oluşan bir tablo hazırlanarak analiz edilmiştir. Sonuç olarak bu araştırma, doğal havalandırma tasarımında Fluent tabanlı CFD analizlerinin rolünü ve sınırlarını tanımlayarak mevcut çalışmaların mimari tasarıma katkılarını görünür kılmaktadır. Bulgular, bu simülasyonların bağlama duyarlı pasif tasarım stratejileri geliştirmek için parametrik ve çok ölçekli bir karar destek çerçevesi sunduğunu göstermektedir.

Passive design and natural ventilation strategies play an important role in reducing energy consumption and ensuring thermal comfort in buildings. The success of these strategies depends on the accurate analysis of climate data and its comprehensive integration into the design process. In this context, Computational Fluid Dynamics (CFD) simulations are used to optimize complex aerodynamic and thermodynamic processes from the preliminary design stage onwards. Among these software, ANSYS Fluent stands out for its reliability and widespread use in academic literature. Existing review studies in the literature generally examine passive design strategies independently of analysis tools or consider multiple CFD software in a general framework. This study focuses only on research conducted using ANSYS Fluent. In this context, natural ventilation and passive cooling studies published in ANSYS Fluent between 2020 and 2025 were systematically compiled at the architectural scale. The purpose of this study is to reveal ventilation strategies across different building typologies, describe the CFD approaches applied, determine performance indicators, and systematically classify the resulting design outputs. Within the scope of the research, 23 international peer-reviewed articles selected from the Web of Science and Scopus databases were analyzed using a table prepared with parameters such as building typology, climate data, boundary conditions, and architectural design outputs. In conclusion, this research highlights the contributions of existing studies to architectural design by defining the role and limitations of Fluent-based CFD analyses in natural ventilation design. The findings indicate that these simulations provide a parametric, multi-scale decision-support framework for developing context-sensitive passive design strategies.

 Natural Ventilation Passive Cooling Computational Fluid Dynamics (CFD) ANSYS Fluent Architectural Design Doğal Havalandırma Pasif Soğutma Hesaplamalı Akışkanlar Dinamiği (CFD) ANSYS Fluent Mimari Tasarım [1] Silver, P., & McLean, W. (2014). Mimarlık Teknolojisine Giriş. İstanbul: Yapı Endüstri Merkezi Yayınları. [2] Yeang, K. (2006). Eko Tasarım “Ekolojik Tasarım Rehberi.” (S. Eryıldız & D. Eryıldız, Trans.). İstanbul: Yapı Endüstri Merkezi Yayınları. [3] Awbi, H. B. (2003). Ventilation of Buildings. Ventilation of Buildings: Second Edition (2nd Edition.). London: Spon Press Taylor & Francis Group. https://doi.org/10.4324/9780203634479 [4] Givoni, B. (1994). Passive and Low Energy Cooling of Buildings. New York: Van Nostrand Reinhold. [5] La Roche, P. M. (2017). Carbon-neutral architectural design. Boca Raton: Taylor & Francis, CRC Press. [6] Santamouris, M. (1998). Natural Ventilation in Buildings - A Design Handbook. (Francis. Allard, Ed.). London: James and James (Science Publishers) Ltd. [7] Lechner, N. (2015). Heating, Cooling, Lighting: Sustainable Design Methods for Architects (4th Edition.). New Jersey: Wiley & Sons Inc. [8] Weber, W., & Yannas, S. (Eds.). (2013). Lessons from Vernacular Architecture. London: Routledge. https://doi.org/10.4324/9780203756164 [9] Iyengar, K. (2015). Sustainable architectural design: An overview. New York: Taylor and Francis. https://doi.org/10.4324/9781315758473 [10] Url-1. (2026). Ansys Fluent | Fluid Simulation Software. Last Accessed:18.02.2026, from https://www.ansys.com/products/fluids/ansys-fluent [11] Sakiyama, N. R. M., Carlo, J. C., Frick, J., & Garrecht, H. (2020). Perspectives of naturally ventilated buildings: A review. Renewable and Sustainable Energy Reviews, 130, 109933. https://doi.org/10.1016/j.rser.2020.109933 [12] Hu, M., Zhang, K., Nguyen, Q., & Tasdizen, T. (2023). The effects of passive design on indoor thermal comfort and energy savings for residential buildings in hot climates: A systematic review. Urban Climate, 49. https://doi.org/10.1016/j.uclim.2023.101466 [13] Bienvenido-Huertas, D., de la Hoz-Torres, M. L., Aguilar, A. J., Tejedor, B., & Sánchez-García, D. (2023). Holistic overview of natural ventilation and mixed mode in built environment of warm climate zones and hot seasons. Building and Environment, 245(110942), 110942. https://doi.org/10.1016/j.buildenv.2023.110942 [14] Omrani, S., Garcia-Hansen, V., Capra, B., & Drogemuller, R. (2017). Natural ventilation in multi-storey buildings: Design process and review of evaluation tools. Building and Environment, 116, 182–194. https://doi.org/10.1016/j.buildenv.2017.02.012 [15] Hajdukiewicz, M., González Gallero, F. J., Mannion, P., Loomans, M. G. L. C., & Keane, M. M. (2024). A narrative review to credible computational fluid dynamics models of naturally ventilated built environments. Renewable and Sustainable Energy Reviews, 198, 114404. https://doi.org/10.1016/j.rser.2024.114404 [16] Patania, F., Gagliano, A., Nocera, F., Ferlito, A., & Galesi, A. (2010). Thermofluid-dynamic analysis of ventilated facades. Energy and Buildings, 42(7), 1148–1155. https://doi.org/10.1016/j.enbuild.2010.02.006 [17] Labat, M., Woloszyn, M., Garnier, G., Rusaouen, G., & Roux, J. J. (2012). Impact of direct solar irradiance on heat transfer behind an open-jointed ventilated cladding: Experimental and numerical investigations. Solar Energy, 86(9), 2549–2560. https://doi.org/10.1016/j.solener.2012.05.030 [18] Aparicio-Fernández, C., Vivancos, J. L., Ferrer-Gisbert, P., & Royo-Pastor, R. (2014). Energy performance of a ventilated façade by simulation with experimental validation. Applied Thermal Engineering, 66(1–2), 563–570. https://doi.org/10.1016/j.applthermaleng.2014.02.041 [19] Alvarado-Alvarado, A. A., De Bock, A., Ysebaert, T., Belmans, B., & Denys, S. (2023). Modeling the hygrothermal behavior of green walls in Comsol Multiphysics®: Validation against measurements in a climate chamber. Building and Environment, 238, 110377. https://doi.org/10.1016/j.buildenv.2023.110377 [20] Marinosci, C., Strachan, P. A., Semprini, G., & Morini, G. L. (2011). Empirical validation and modelling of a naturally ventilated rainscreen façade building. Energy and Buildings, 43(4), 853–863. https://doi.org/10.1016/j.enbuild.2010.12.005 [21] Duan, Z., Li, B., Zi, Y., & Yao, G. (2025). Building retrofit multiobjective optimization using neural networks and genetic algorithm three for energy carbon and comfort. Scientific Reports 2025 15:1, 15(1), 38076-. https://doi.org/10.1038/s41598-025-21871-0 [22] Giancola, E., Sanjuan, C., Blanco, E., & Heras, M. R. (2012). Experimental assessment and modelling of the performance of an open joint ventilated façade during actual operating conditions in Mediterranean climate. Energy and Buildings, 54, 363–375. https://doi.org/10.1016/j.enbuild.2012.07.035 [23] Gagliano, A., Nocera, F., & Aneli, S. (2016). Thermodynamic analysis of ventilated façades under different wind conditions in summer period. Energy and Buildings, 122, 131–139. https://doi.org/10.1016/j.enbuild.2016.04.035 [24] Guo, W., Liu, X., & Yuan, X. (2015). Study on Natural Ventilation Design Optimization Based on CFD Simulation for Green Buildings. Procedia Engineering, 121, 573–581. https://doi.org/10.1016/j.proeng.2015.08.1036 [25] Hussain, S., & Oosthuizen, P. H. (2012). Numerical study of buoyancy-driven natural ventilation in a simple three-storey atrium building. International Journal of Sustainable Built Environment, 1(2), 141–157. https://doi.org/10.1016/j.ijsbe.2013.07.001 [26] Subhashini, S., & Thirumaran, K. (2020). CFD simulations for examining natural ventilation in the learning spaces of an educational building with courtyards in Madurai. Building Services Engineering Research and Technology, 41(4), 466–479. https://doi.org/10.1177/0143624419878798 [27] Awbi, H. B. (2003). Ventilation of Buildings (2nd Edition.). London: Routledge. https://doi.org/10.4324/9780203634479 [28] Santamouris, M., & Kolokotsa, D. (2013). Passive cooling dissipation techniques for buildings and other structures: The state of the art. Energy and Buildings, 57, 74–94. https://doi.org/10.1016/j.enbuild.2012.11.002 [29] Raven, J. (2010). Cooling the Public Realm: Climate-Resilient Urban Design. In Konrad Otto-Zimmermann (Ed.), Resilient Cities: Cities and Adaptation to Climate Change Proceedings of the Global Forum 2010 (pp. 451–463). Springer. https://doi.org/10.1007/978-94-007-0785-6 [30] Utkutuğ, G., Ayçam, İ., & Erol, M. (1996). GÜMMF. Mimarlık Bölümü, Fiziksel Çevre Denetimi-I Yayınlanmamış Ders Notları. Ankara. [31] Tikul, N., Hokpunna, A., & Chawana, P. (2022). Improving indoor air quality in primary school buildings through optimized apertures and classroom furniture layouts. Journal of Building Engineering, 62. https://doi.org/10.1016/j.jobe.2022.105324 [32] Izadyar, N., Miller, W., Rismanchi, B., & Garcia-Hansen, V. (2020). Numerical simulation of single-sided natural ventilation: Impacts of balconies opening and depth scale on indoor environment. In IOP Conference Series: Earth and Environmental Science (Vol. 463). Institute of Physics Publishing. https://doi.org/10.1088/1755-1315/463/1/012037 [33] Azkur, H. S., & Oral, M. (2024). The effect of window configuration on passive cooling in mosque interiors. Megaron, 19(1), 1–12. https://doi.org/10.14744/megaron.2024.46034 [34] Fang, Z., Wang, W., Chen, Y., & Song, J. (2022). Structural and Heat Transfer Model Analysis of Wall-Mounted Solar Chimney Inlets and Outlets in Single-Story Buildings. Buildings, 12(11), 1–1790. https://doi.org/10.3390/buildings12111790 [35] Yoon, N., Piette, M. A., Han, J. M., Wu, W., & Malkawi, A. (2020). Optimization of Window Positions for Wind-Driven Natural Ventilation Performance. Energies 2020, Vol. 13, Page 2464, 13(10), 2464. https://doi.org/10.3390/en13102464 [36] Bittar, M., Araujo, A. L. de, Almeida, O. de, Martins, T., & Sousa, M. (2025). Enhancing indoor airflow: insights on cross ventilation through CFD simulations. Ambiente Construído, 25, e137844. https://doi.org/10.1590/s1678-86212025000100803 [37] Jayasree, T. K., Jinshah, B. S., Visakha Lakshmi, V., & Tadepalli, S. (2021). Assessment of Air Change Effectiveness and Thermal Comfort in a Naturally Ventilated Kitchen with Insect-Proof Screen Using CFD. Journal of Green Building, 16(3), 37–56. Retrieved from https://jgb.kglmeridian.com [38] Nejat, P., Salim Ferwati, M., Calautit, J., Ghahramani, A., & Sheikhshahrokhdehkordi, M. (2021). Passive cooling and natural ventilation by the windcatcher (Badgir): An experimental and simulation study of indoor air quality, thermal comfort and passive cooling power. Journal of Building Engineering, 41. https://doi.org/10.1016/j.jobe.2021.102436 [39] Jafari, S., & Kalantar, V. (2022). Numerical simulation of natural ventilation with passive cooling by diagonal solar chimneys and windcatcher and water spray system in a hot and dry climate. Energy and Buildings, 256. https://doi.org/10.1016/j.enbuild.2021.111714 [40] Kahkzand, M., Deljouiee, B., Chahardoli, S., & Siavashi, M. (2024). Radiative cooling ventilation improvement using an integrated system of windcatcher and solar chimney. Journal of Building Engineering, 83, 108409. https://doi.org/10.1016/j.jobe.2023.108409 [41] Aeinfar, S., & Serteser, N. (2025). Parametric study of energy optimization and airflow management in high-rise buildings with double-skin façade using a genetic algorithm and CFD. Journal of Building Engineering, 105. https://doi.org/10.1016/j.jobe.2025.112441 [42] Gökşen, F., & Ayçam, İ. (2023). Thermal performance assessment of opaque ventilated façades for residential buildings in hot humid climates. Gradjevinar, 75(3), 225–237. https://doi.org/10.14256/JCE.3576.2022 [43] Obeidat, L. M., Jones, J. R., Mahaftha, D. M., Amhamed, A. I., & Alrebei, O. F. (2024). Optimizing indoor air quality and energy efficiency in multifamily residences: Advanced passive pipe system parametrics study. International Journal of Environmental Science and Technology, 21(16), 10003–10026. https://doi.org/10.1007/s13762-024-05624-6 [44] Suhendri, S., Hu, M., Su, Y., Darkwa, J., & Riffat, S. (2022). Parametric study of a novel combination of solar chimney and radiative cooling cavity for natural ventilation enhancement in residential buildings. Building and Environment, 225. https://doi.org/10.1016/j.buildenv.2022.109648 [45] Suhendri, S., Hu, M., Su, Y., Darkwa, J., & Riffat, S. (2022). Performance evaluation of combined solar chimney and radiative cooling ventilation. Building and Environment, 209. https://doi.org/10.1016/j.buildenv.2021.108686 [46] Fezai, M., Tashtoush, B., Ghoulem, M., Elmoueddeb, K., & Elakhdar, M. (2024). Investigation of the effectiveness of top-down natural ventilation of a poultry building in a hot-summer mediterranean climate. Building Services Engineering Research and Technology, 45(1), 53–73. https://doi.org/10.1177/01436244231215454 [47] Ghorbani, N., Khayyaminejad, A., & Fartaj, A. (2025). Integrating Solar Chimney, Trombe Wall, and PCM for Enhanced Energy Efficiency: A Climate-Based Comparative Study. https://doi.org/10.11159/enfht25.157 [48] Fakhraei, O., Gorjian, S., Ghobadian, B., & Najafi, G. (2024). Experimental performance evaluation of a dual-purpose photovoltaic-thermal system with phase change material for passive heating and cooling. Journal of Building Engineering, 98(3), 111494. https://doi.org/10.1016/j.jobe.2024.111494 [49] Eso, O., Darkwa, J., & Calautit, J. (2025). Integrated Phase-Change Materials in a Hybrid Windcatcher Ventilation System. Energies, 18(4), 848. https://doi.org/10.3390/en18040848 [50] Khayyaminejad, A., Jalilian, S., & Fartaj, A. (2024). Twisted tapes in solar chimney-earth air heat exchangers for equipment downsizing and passive cooling. Journal of Building Engineering, 98, 111128. https://doi.org/10.1016/j.jobe.2024.111128 [51] Khayyaminejad, A., Jalilian, S., & Fartaj, A. (2024). Twisted tapes in solar chimney-earth air heat exchangers for equipment downsizing and passive cooling. Journal of Building Engineering, 98. https://doi.org/10.1016/j.jobe.2024.111128 [52] Hassan, A. M., ELMokadem, A. A., Megahed, N. A., & Abo Eleinen, O. M. (2020). Urban morphology as a passive strategy in promoting outdoor air quality. Journal of Building Engineering, 29, 101204. https://doi.org/10.1016/j.jobe.2020.101204 [53] Niu, S., Tong, H., Liu, X., Wang, A., Chen, L., Song, D., Jin, X. (2024). A quick simulation workflow to optimizing natural ventilation for building and landscape design. Energy and Buildings, 324, 114875. https://doi.org/10.1016/j.enbuild.2024.114875