hittite j sci eng

Hittite Journal of Science and Engineering

2148-4171

Hitit University

10.17350/HJSE19030000095

Microstructural and Mechanical Characterization of 9Cr-1Mo-1W Weld Metal

Salur

Emin

Selcuk University, Faculty of Technology, Konya/TURKEY Acarer

Mustafa

Selcuk University, Faculty of Technology, Konya/TURKEY Kabakci

Fikret

Bulent Ecevit University, Alapli Vocational School, Zonguldak/TURKEY Keskinkilic

Selçuk

Gedik Welding Company, Istanbul/TURKEY Acar

Filiz Kumdali

Gedik Welding Company, Istanbul/TURKEY Cicek

Bünyamin

Hitit University, Alaca Avni Çelik Vocational School, Çorum/TURKEY, bunyamincicek@hitit.edu.tr

09 30 2018

5 3 203 208

2014

Hittite Journal of Science and Engineering

This paper presents microstructural and mechanical characterization of E911 welds metal. The types and transformations of the phases and microstructures of all-weld metal have been investigated through scanning electron microscopy, optical microscope, x-ray diffraction analysis. The elemental analysis and mechanical tests of the weld metal was determined by x-ray fluorescence, hardness measurements, and tensile tests respectively. This study will contribute the understanding of microstructural progression, microstructure characterization and mechanical properties of E911 steel after the post-weld heat treatment PWHT .

E911 Microstructure Nechanical properties Weld metal Cr-Mo steel

1. Guguloth, K., Swaminathan, J., Roy, N., & Ghosh, R. N. Uniaxial creep and stress relaxation behavior of modified 9Cr-1Mo steel. Materials Science and Engineering: A 684,, (2017). 683-696.

4. Jeshvaghani, R. A., Emami, M., Shafiee, O., & Shahverdi, H. R. Study on formation and characterization of iron aluminide coatings on 9Cr–1Mo steel substrate. Surface and Coatings Technology, 240, (2014), 365-372.

6. Wang, H., Zhang, H., & Li, J. Microstructural evolution of 9Cr–1Mo deposited metal subjected to weld heating. journal of materials processing technology, 209(6), (2009), 2803- 2811.

7. Barnes, A., Abson, D., The effect of composition on microstructural development and toughness of weld metals for advanced high temperature 9–13Cr steels. In: Proceedings of the 2nd International Conference on Integrity of High-Temperature Welds, November 10–12, 2003.

11. Panait, C. G., Zielińska-Lipiec, A., Koziel, T., CzyrskaFilemonowicz, A., Gourgues-Lorenzon, A. F., & Bendick, W. Evolution of dislocation density, size of subgrains and MXtype precipitates in a P91 steel during creep and during thermal ageing at 600 C for more than 100,000 h. Materials Science and Engineering: A, 527(16), (2010), 4062-4069.

13. Panait, C. G., Bendick, W., Fuchsmann, A., GourguesLorenzon, A. F., & Besson, J. Study of the microstructure of the Grade 91 steel after more than 100,000 h of creep exposure at 600 C. International journal of pressure vessels and piping, 87(6), (2010), 326-335.

20. ASTM International, Designation: E8/8M-08, Standard practice for tensile testing of metallic materials, Annu. Book ASTM Stand. 64–88, 2009.

25. Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger, Tubes. ASTM Standards 2011, A213/A213 M – 11a.