hittite j sci eng

Hittite Journal of Science and Engineering

2148-4171

Hitit University

10.17350/HJSE19030000098

Microstructure, corrosion and wear properties of FeCrNiMo based coating produced on AISI 1040 steel by using laser coating technique

Islak

Serkan

Kastamonu University, Department of Metallurgical and Materials Engineering, Kastamonu, TURKEY Ozorak

Cihan

Kastamonu University, Department of Metallurgical and Materials Engineering, Kastamonu, TURKEY

09 30 2018

5 3 219 223

2014

Hittite Journal of Science and Engineering

This study aims to investigate microstructure, hardness, corrosion and wear properties of FeCrNiMo-based coating produced on AISI 1040 steel by using laser welding method. Microstructure properties and phase formation were examined by SEM-EDS and XRD. The hardness measurement was made by using a microhardness device along a line from the upper surface of the coating to the substrate. The wear tests of both the substrate and coating layer were made with a scratch test device. SEM examinations showed that the coating layer had a dendritic microstructure and was uniformly bonded to the substrate. The coating layer was harder than the substrate. According to wear tests, the friction coefficient of the coating layer was lower compared to the substrate. Substrate and coating layer were immersed in an aqueous solution of %3,5 NaCl for potentiodynamic measurements. Corrosion results showed that coating of the AISI 1040 steel with FeCrNiMo increased the corrosion resistance.

Laser coating microstructure wear corrosion

1. Deuis RL, Yellup JM, Subramanian C. Metal-matrix composite coatings by PTA surfacing. Composites Science and Technology 58 (1998) 299-309.

2. Gülenç B, Kahraman N. Wear behaviour of bulldozer rollers welded using a submerged arc welding process. Materials & Design 24 (2003) 537-542.

3. Nakajima A, Mawatari T, Yoshida M, Tani K, Nakahira A. Effects of coating thickness and slip ratio on durability of thermally sprayed WC cermet coating in rolling/sliding contact. Wear 241 (2000) 166-173.

4. Knight JC, Page TF. The fine-scale microstructure of thin hard TiN and TiC coatings on steels. Thin Solid Films 193- 194 (1990) 431-441.

5. Wolfe DE, Singh J, Narasimhan K. Synthesis of titanium carbide/chromium carbide multilayers by the coevaporation of multiple ingots by electron beam physical vapor deposition. Surface and Coatings Technology 160 (2002) 206-218.

6. Budinski KG. Hardsurfacing: an overview of the process. Welding Design & Fabrication, July (1986) 51-57.

7. Buytoz S., Orhan A., Gur A.K., Caligulu U. Microstructural Development of Fe–Cr–C and B4C Powder Alloy Coating on Stainless Steel by Plasma-Transferred Arc Weld Surfacing. Arabian Journal for Science and Engineering. 38(8) (2013) 2197-2204.

8. Wu W, Hwu LY, Lin DY, Lee JL. The Relationship between alloying elements and retained austenite in martensitic stainless-steel welds. Scripta Materialia 42 (2000) 1071- 1076.

9. Pei YT, Zuo TC. Gradient microstructure in laser clad TiCreinforced Ni-alloy composite coating. Materials Science and Engineering A 241 (1998) 259-263.

10. Yang S, Liu WJ, Zhong ML, Wang ZJ. TiC reinforced composite coating produced by powder feding laser cladding. Mater. Lett. 58 (2004) 2958-2962.

11. Anandkumar R, Almeida A, Colaço R, Vilar R, Ocelik V, De Hosson JThM. Microstructure and wear studies of laser clad Al-Si/SiC(p) composite coatings. Surface & Coatings Technology 201 (2007) 9497-9505.

12. Ratajski T, Kalemba-Rec I, Dubiel B. Manufacturing, Microstructure and Corrosion Resistance of Electrophoretically Deposited SiO2 and Ni/SiO2 Coatings on X2CrNiMo17–12–2 Steel. Archives of Metallurgy and Materials. 61(2) (2016) 1221–1227.

14. Sun SD, Fabijanic D, Ghaderi A, Leary M, Toton J, Sun S, Brandt M, Easton M. Microstructure and hardness characterization of laser coatings produced with a mixture of AISI 420 stainless steel and Fe-C-Cr-Nb-B-Mo steel alloy powders, Surface and Coatings Technology, 296 (2016) 76-87.

15. Gong, Fu-bao, et al. Influence of heat treatment on microstructure and mechanical properties of FeCrNi coating produced by laser cladding. Transactions of Nonferrous Metals Society of China 26.8 (2016): 2117-2125.

16. Stern M, Geary AL. Electrochemical Polarization I. A Theoretical Analysis of the Shape of Polarization Curves. Journal of The Electrochemical Society 104 (1957) 56.

17. George G, Shaikh H. Introduction to Austenitic Stainless Steels, Corrosion of Austenitic Stainless Steels. Mechanism, Mitigation and Monitoring, edited by: H. S. Khatak, B. Raj, Woodhead Publishing House, Cambridge, UK, (2002).

18. Sedriks AJ, Corrosion of Stainless Steels, Wiley, New York, NY, USA, 2nd edition, (1996).

19. Porcayo-Calderon J, Casales-Diaz M, Salinas-Bravo VM, Martinez-Gomez L. Corrosion Performance of FeCr-Ni Alloys in Artificial Saliva and Mouthwash Solution. Bioinorganic Chemistry and Applications 2015 (2015) 1-14.

20. Qiao L., Wu Y., Hong S., Qin Y., Shi W., Li G. Corrosion Behavior of HVOF-Sprayed Fe-Based Alloy Coating in Various Solutions. Journal of Materials Engineering and Performance, 26(8) (2017) 3813-3820.