CFD Analysis of a Backward Facing Step Flows

Year 2018, Volume: 2 Issue: 3, 10 - 16, 30.09.2018

Thabit Thabit Senan Thabet Yaser Jasim

https://doi.org/10.30939/ijastech..447973

Cited By: 4

Abstract

This paper
introduces a lot of situations about the Computational Fluid Dynamics (CFD) analysis
of backward facing step flows. The main point of this paper is incompressible
flow in a backward step, measured by drivers and Seegmiller experiments.

The researchers concluded that validation
parameters chosen for the study are the locations of the surface hydrostatic
pressure and the reattachment compression impact downstream of the step. The
surface static pressures predicted by WIND using a two-equation SST turbulence
model are shown below. This figure includes a comparison of earlier versions of
NPARC and WIND with experimental data. The WIND code slightly overestimates the
surface pressure drop from the free flow value to about 5% of the corner value
of the separation area (base pressure). This may be due to the fact that the
transition point is experimentally unknown and not accurately predicted by the
natural transition of the turbulence model. However, this over-forecasting
predicts the previous pressure drop closer to the experimental results than the
AEDC PARC, TUFF, and GASP codes using the Baldwin Lomax, KE, and Cebeci, and
Smith models, respectively. The rest of the forecast for WIND pressure is in
good agreement with the forecast pressure.

Keywords

CFD, Turbulence, Backward-Step

References

• Smith, H. E. (1967). The flow field and heat transfer downstream of a rearward facing step in supersonic flow (No. ARL-67-0056). AEROSPACE RESEARCH LABS WRIGHT-PATT
• Program for Propulsion-Type flows (No. AEDC-TR-90-7). ARNOLD ENGINEERING DEVELOPMENT CENTER ARNOLD AFB TN.
• Ebrahimi, H. B. (1995). CFD Validation and Evaluation for Reacting Flows, Part III. AIAA Paper, 735, 1995.
• Thabet, Senan, and Thabit, Thabit H. (2018). Computational Fluid Dynamics : Science of the Future, International Journal of Research and Engineering, Vol.5, No.6, pp. 430-433.
• Thabet, Senan, and Thabit, Thabit H. (2018). CFD Simulation of the Air Flow around a Car Model (Ahmed Body), International Journal of Scientific and Research Publications, Vol.8, No.7, pp.517-525.
• Thabit, Thabit H., and Younus, Saif Q., 2018, Risk Assessment and Management in Construction Industries, International Journal of Research and Engineering, Vol. 5, No. 2, pp. 315-320.