SEY Tabanlı ANSYS-MAXWELL ile Kalıcı Magnet DC Makinaların Tasarımı ve Analizi

Year 2023, Volume: 7 Issue: 1, 7 - 12, 06.07.2023

Yıldırım Özüpak

https://doi.org/10.46460/ijiea.1130422

Cited By: 1

Abstract

Bu çalışmada, sabit mıknatıslı doğru akım (SMDA) motoru tasarlanmış ve analiz edilmiştir. Elde edilen hız, verim, tork ve hava aralığı akı dağılımları incelenmiş ve sonuçlar motor tipi için literatür ile karşılaştırılmıştır. Tasarlanan motoru literatürle karşılaştırmak için temel motor özelliklerinin yanı sıra aynı malzemelerden yapılmış ve aynı geometrik boyutlara sahip mıknatıslar kullanılmıştır. Farklı rotor yapılarına sahip iki yüzey mıknatıslı motorun anma akımı, gerilim, hız, tork ve verimleri, girdap akımı etkisi, tork-hız karakteristikleri ve manyetik analiz dahil olmak üzere, Sonlu Elemanlar Yöntemine (SEY) dayalı çözüm gerçekleştiren ANSYS-MAXWELL programı kullanılarak gerçekleştirilmiştir. Bu çalışma, yüzey sabit mıknatıslı (PM) rotorlu motorun temel yapısı, elektromanyetik özellikleri, hız-tork değerleri, veriminin incelenmesi ve literatürle karşılaştırılması açısından literatüre faydalı bir çalışma olacaktır.

Keywords

SEY, Motor, Maxweel

Design and Analysis of Permanent Magnet DC Machines with FEM Based ANSYS-MAXWELL

Abstract

In this paper, permanent magnet direct current (PMDC) motor was designed and analyzed; The obtained speed, efficiency, torque and air gap flux distributions were examined and the results were compared with literature for the motor type. In order to compare the designed machine with literature, magnets made of the same materials and having the same geometric dimensions were used, as well as the basic motor features. The rated current, voltage, speed, torque and efficiency of two surface magnet motors with different rotor structures, including the eddy current effect, torque-speed characteristics and magnetic analysis, were investigated using the ANSYS-MAXWELL program, which performs a solution based on the Finite Element Method (FEM). This study will be a useful study for the literature in terms of examining the basic structure, electromagnetic properties, speed-torque values, efficiency of motor with surface permanent magnet (PM) rotor and comparing with literature.

Keywords

FEM, Motor, Maxwell

References

• [1] D., P., Simulation of a Brushless DC Motor in ANSYS – Maxwell 3D, Master Thesis, Czech Technical University and Department of Power Engineering, (2016).
• [2] L. B., Automotive Electrification: The Nonhybrid Story, IEEE Transactions on Transportation Electrification, 2015, 1(1), 40-53.
• [3] C., A., Mahajan, G., Implementation of BLDC Motor Based Water Pump for Automotive Vehicle, The International Journal of Engineering and Science, 2015, 4(6), 34-41.
• [4] O., M., Takeuchi, C., Magnetic suspension performance of a bearingless brushless DC motor for small liquid pumps, 2009 International Conference on Electrical Machines and Systems, 2010, 1-4.
• [5] H., Duane C., "Brushless Permanent Magnet Motor Design, Second Edition" 2006.
• [6] G., J. F., M. Wing, Permanent Magnet Motor Technology Design, and Applications, Marcel Dekker, N. Y., USA, 2002.
• [7] Jin, J., “The Finite Element Method in Electromagnetics”, Second Edition, John Wiley& Sons, 2002.
• [9] G. Dajaku and D. Gerling, “Design of Permanent Magnet Machines for Hybrid Vehicles,” ANSYS Conference & 25th CADFEM Users’ Meeting 2007.
• [10] A. Mujianto, M. N. Inayati, “Comparation of the slot less brushless DC motor (BLDC) and slotted BLDC using 2D modeling”, IEEE Int. Conf. On Elec Eng and Comp Sci (ICEECS), DOI:10.1109/ICEECS.2014.7045248.
• [11] L. Ji Young, Geun Ho Lee, Jung Pyo Hong and Jin Hur,“comparative study of line start permanent magnet, skeleton type brushless and Snailcam type switched reluctance motor for a fan”, Sixth International Conference on Electrical Machines and Systems, 2003.ICEMS 2003, Vol. 1, pp.183- 186.
• [12] Y. Li , T.A. Walls, J.D. Loyd, and J.L. Skinner,“A novel two- phaseBPM drive system with high power density and low cost”, IEEE Transaction On Industry Applications, Vol. 34, No. 5, Sept/Oct 1998,pp.1072- 1080.
• [13] Chang-liang Xia, “Permanent Magnet Brushless DC Motor Drives and Controls,”John Wiley Sons Singapore Pvt. Ltd,2012.
• [14] P. Pathiyil, “Design Optimisation using Genetic Algorithm and Finite Element Analysis Of a Three Phase Outer Spin Brushless DC Motor”, International Conference on Mathematical Modeling and Application in Industrial Process,March 31, 2011.
• [15] T. Waghmare, P.R.Choube, “Design Of Internal Permanent Magnet Brushless Dc Motor Using Ansys”, International Journal Of Research Publications In Engineering And Technology,ISSN: 2454-7875 VOLUME 2, ISSUE 4, April 2016.
• [16] A. Mujianto , Muh. Nizam ,Inayati, “Comparation of the slotless brushless DC motor (BLDC) and slotted BLDC using 2D modeling”, IEEE Int. Conf. on Elec EngG and Comp Sci (ICEECS), DOI: 10.1109/ICEECS.2014.7045248.
• [17] N. Shrivastava, Anil Brahmin, “Design of 3-Phase BLDC Motor for Electric Vehicle Application by Using Finite Element Simulation”, International Journal of Emerging Technology and Advanced Engineering, Volume 4, Issue 1, January 2014.
• [18] M. Sameeullah, Sunita Chandel, “ Design and Analysis of Solar Electric Rickshaw: A Green Transport Model”.2016 IEEE.
• [19] B. N. Kommula, V. R. Kota,Direct instantaneous torque control of Brushless DC motor using firefly Algorithm based fractional order PID controller, Journal of King Saud University- Motorering Sciences,Volume 32, Issue 2, 2020, Pages 133-140.