Steam Methane Reforming System for Hydrogen Production: Advanced Exergetic Analysis

Year 2012, Volume: 15 Issue: 1, 1 - 9, 10.02.2012

Alicia Boyano Ana-maria Blanco-marigorta , Tatiana Morosuk , George Tsatsaronis

Abstract

Steam methane reforming (SMR) is one of the most promising processes for the production of hydrogen. Therefore, the overall thermodynamic efficiency of this process is of particular importance. The thermodynamic inefficiencies in a thermal system are related to exergy destruction and exergy loss. However, a conventional exergetic analysis cannot evaluate the mutual interdependencies among the system components nor the real potential for improving the energy conversion system being considered. One of the tools under development for the improvement of energy conversion systems from the thermodynamic viewpoint is the advanced exergetic analysis. In this paper, the avoidable part of the exergy destruction is estimated and the interactions among components of the overall system are evaluated in terms of endogenous and exogenous exergy destruction. The assumptions required for these calculations are discussed in detail, especially for those components that are typically used in chemical processes. Results of this paper suggest options for increasing the thermodynamic efficiency of hydrogen production by steam-methane reforming.

Keywords

Steam methane reforming; hydrogen production; conventional exergetic analysis; advanced exergetic analysis

References

• Aspen Plus, 2007, User Guide- Vol. 1 and 2-Release x.
• Bejan A., Tsatsaronis G., Moran M., 1996, Thermal design and optimization, John Wiley and Sons, USA.
• Boyano A., Blanco-Marigorta A.M., Morosuk T., Tsatsaronis G., 2011, Exergoenvironmental analysis of a steam methane reforming process for hydrogen production. Energy – The International Journal, Vol.36 (4), pp. 2202-2214.
• Boyano A., Morosuk T., Blanco-Marigorta A.M., Tsatsaronis G., 2012, Conventional and advanced exergoenvironmental analysis of a steam methane reforming International Journal of Cleaner Production, Vol. 20, pp. 152-160. for hydrogen production,
• Cziesla F., Tsatsaronis G., Gao Z., 2006, Avoidable thermodynamic inefficiencies and costs in an externally fired combined cycle power plant, Energy Int. J., Vol. 31, Nos.10–11, pp. 1472–1489.
• Lazzaretto A., Tsatsaronis G., 2006, SPECO: A systematic and general methodology for calculating efficiencies and costs in thermal systems, Energy – The International Journal, Vol. 31, pp. 1257-1289.
• Morosuk T., Tsatsaronis G., 2009, Advanced Exergy Analysis Application to a Simple Open Gas-Turbine System, Int. J. of Thermodynamics, Vol. 12, No. 3, pp. 105-111. –
• Rosen M.A., 1991, Thermodynamic investigation of hydrogen production by steam-methane reformation. Int J Hydrogen Energy, Vol. 16, No.3, pp. 207-217.
• Simpson A.P., Lutz A.E., 2007, Exergy analysis of hydrogen production via steam methane reforming, Int. J. Hydrogen Energy, Vol. 32, pp. 4811-4820.
• Tsatsaronis G., Cziesla F., 2002, Thermoeconomics. In: Enclyclopedia of Physical Science and Technology, 3rd ed. Academic Press, Vol. 16, pp. 659-680.
• Tsatsaronis G., Morosuk T., 2008, A general exergy-based method for combining a cost analysis with an environmental impact analysis. Part I. Proceedings of the ASME International Mechanical Engineering Congress and Exposition, Boston, USA, 2008, files IMECE2008-67218.
• Tsatsaronis G., Morosuk T., 2008, A general exergy-based method for combining a cost analysis with an environmental impact analysis. Part II. Proceedings of the ASME International Mechanical Engineering Congress and Exposition, Boston, USA, 2008, files IMECE2008-67219.
• Tsatsaronis G., Morosuk T., 2010, Advanced exergetic analysis of a novel system for generating electricity and vaporizing liquefied natural gas. Energy – The international Journal, Vol. 35, pp. 820-829.
• Tsatsaronis G., Park M.H., 2002, On avoidable and unavoidable exergy destructions and investment costs in thermal systems, Energy Conversion and Management, Vol. 43, pp.1259–1270.
• Twigg M.V., ed., 1989, Catalyst handbook, 2nd Edition, Wolfe Publishing Ltd.
• Yang Y.C., Lee B.J., Chun Y.N., 2009, Characteristics of methane reforming using gliding arc reactor Energy – The International Journal, Vol. 34, pp. 172-177.