Energy and Exergy Analysis of an Innovative Power/Refrigeration Cycle: Kalina Cycle and Ejector Refrigeration Cycle

Year 2023, Volume: 35 Issue: 2, 193 - 202, 03.07.2023

Candeniz Seçkin

https://doi.org/10.7240/jeps.1203686

Cited By: 2

Abstract

This study presents a thermodynamic analysis of a new combined power/refrigeration combined cycle. The combined cycle is comprised of two innovative cycles: Kalina cycle (KNC) and ejector refrigeration cycle (ERC) for power and refrigeration production, respectively. Recovery of heat process is involved in the design of the cycle to rise the energetic and exergetic efficiencies: emitted heat by the KNC is absorbed by the ERC in order to generate cooling. Effects of variation in KNC operational conditions which have direct effects on turbine power production capacity (temperature and pressure of the working fluid flow at the turbine inlet) on performance evaluation parameters of the system (energy efficiency, exergy efficiency, energetic and exergetic content of produced refrigeration and net power) are investigated. A detailed discussion of the results is also reported. Energetic and exergetic efficiency results are substantially dominated by generated power, i.e., KNC parameters which impose direct effect on turbine power production performance is of superior importance to rise the energy and exergy efficiencies.

Keywords

Ejector refrigeration, Kalina cycle, Combined cycle, Energy efficiency, Exergy efficiency.

Yeni Bir Güç/Soğutma Çevriminin Enerji ve Ekserji Analizi: Kalina Çevrimi ve Ejectörlü Soğutma Çevrimi

Abstract

Bu çalışmada yeni bir bileşik güç/soğutma çevriminin termodinamik analizi sunulmuştur. Bileşik çevrim iki yeni çevrimin birleşiminden oluşmuştur: güç Kalina çevriminde (KNC), soğutma ise ejektörlü soğutma çevriminde (ERC) üretilmektedir. Sistem enerji ve ekserji verimlerini yükseltmek için bileşik çevrim tasarımında ısı geri kazanımı prosesine yer verilmiştir: KNC tarafından salınan ısı ERC tarafından alınmakta ve soğutma üretiminde kullanılmaktadır. KNC çalışma parametrelerinden türbin güç üretim kapasitesine direkt etkisi olan parametrelerin değişiminin (çevrim akışkanının türbin girişindeki sıcaklık ve basıncı), bileşik çevrim enerji ve ekserji verimi ve ayrıca, üretilen güç ve soğutmanın enerji ve ekserji karşılıklarına olan etkileri incelenmiştir. Elde edilen sonuçların detaylı incelemesi de çalışmada sunulmuştur. Enerji ve ekserji veriminin baskın şekilde bileşik çevrimde üretilen güç tarafından belirlendiği tespit edilmiştir. Diğer bir deyişle, bileşik çevrimin enerji ve ekserji verimini yükseltmek için KNC çevriminde güç üretim kapasitesini direkt etkileyen faktörler öncelikli olarak incelenmelidir.

Keywords

Ejektörlü soğtuma, Kalina çevrimi, Bileşik çevrim, Enerji verimi, Ekserji verimi, Ejector refrigeration, Kalina cycle, Combined cycle, Energy efficiency, Exergy efficiency.

References

• [1] Internal Energy Agency. “World Energy Outlook. Paris: Internal Energy Agency; 2012. [cited 2022 October 5].” (2012).
• [2] B. Herzog, P. Jonathan, K.A. Baumert. “Navigating the numbers- greenhouse gas data and international climate policy. Washington: World Resources Institute: [cited 2022 October 5].” (2005).
• [3] N. Ozalp. Utilization of heat, power, and recovered waste heat for industrial processes in the U.S. chemical industry. J Energy Resour., 131, 022401-1- 022401-11, (2009).
• [4] A. Khaliq, R. Kumar, I. Dincer. Exergy analysis of an industrial waste heat recovery based cogeneration cycle for combined production of power and refrigeration. J Energ Resour., 131, 022402-1- 022402-9, (2009).
• [5] K. Sarmah, P. Gupta. Refrigeration by waste heat recovery. International Journal of Interdisciplinary Research, 3, 1-7, (2017).
• [6] D. Brough, H. Jouhara. The aluminum industry: a review on state-of-the-art technologies, environmental impacts and possibilities for waste heat recovery. International Journal of Thermofluids, 1-2, 1-39. (2020).
• [7] A.O. Arnas, D.D. Boettner, S.A. Norberg, G. Tamm, J.R. Whipple .On the teaching of performance evaluation and assessment of a combined cycle cogeneration system. J Energ Resour, 131, 025501-1- 025501-7, (2011).
• [8] U. Cakir, K. Comakli, F. Yuksel. The role of cogeneration systems in sustainability of energy. Energy Convers Manage., 63, 196–202, (2012).
• [9] M.D. Chowdhury, E.M.A. Mokheimer. Recent developments in solar and low-temperature heat sources assisted power and cooling systems: A design perspective. J Energy Resour, 142, 040801-1 - 040801-17, (2020).
• [10] K. Comaklı. Economic and environmental comparison of the natural gas fired conventional and condensing combi-boilers. J. Energy Inst., 81, 242–246, (2008).
• [11] A. Abusoglu, M. Kanoglu. Exergetic and thermodynamic analyses of diesel engine powered cogeneration. Part 1. Formulations. Appl. Therm. Eng., 29, 234–241, (2009).
• [12] O.M. Ibrahim, S.A. Klein. Absorption power cycles. Energy, 21, 21–27, (1996).
• [13] D.S. Ayou, J.C. Bruno, R. Saravanan, A. Coronas. An overview of combined absorption power and cooling cycles. Renew Sustain Energy Rev,, 21, 728–748, (2013).
• [14] N. Shokati, F. Ranjbar, M. Yari. Exergoeconomic analysis and optimization of basic, dual-pressure and dual-fluid ORCs and Kalina geothermal power plants: A comparative study. Renewable Energy, 83, 527-542, (2015).
• [15] X.X. Zhang, M.G. He, Y. Zhang. A review of research on the kalina cycle. Renew Sustain Energy Rev.,16, 5309–5318, (2012).
• [16] A.I. Kalina. Combined cycle and waste-heat recovery power systems based on a novel thermodynamic energy cycle utilizing low-temperature heat for power generation. In 1983 Joint Power Generation Conference: GT Papers, Indianapolis, IN, USA, 25–29 September, (1983).
• [17] A.I. Kalina. Combined cycle system with novel bottoming cycle. J. Eng. Gas Turbines Power, 106, 737–742, (1984).
• [18] M. Jonsson. Advanced power cycles with mixtures as the working fluid. Diss. Royal Institute of Technology, Stockholm, Sweden, (2003).
• [19] C.H. Marston. Parametric Analysis of the kalina cycle. J. Eng. Gas Turbines Power, 112, 107–116, (1990).
• [20] Y. Park, R. Sonntag. A preliminary study of the kalina power cycle in connection with a combined cycle system. Int. J. Energy Res., 14, 153–162, (1990).
• [21] H.A. Mlcak. Kalina cycle concepts for low temperature geothermal. Geotherm Res Counc Trans, 26, 707–713, (2002).
• [22] C.E.C. Rodriguez, J.C.E. Palacio, O.J. Venturini, E.E.S. Lora, V.M. Cobas, D.M.D. Santos. Energetic and economic comparison of orc and kalina cycle for low temperature enhanced geothermal system in Brazil. Appl. Therm. Eng., 52, 109–119, (2013).
• [23] W. Fu, J. Zhu, T. Li, W. Zhang, J. Li. Comparison of a kalina cycle based cascade utilization system with an existing organic rankine cycle based geothermal power system in an oilfield. Appl. Therm. Eng., 58, 224–233, (2013).
• [24] M.H.D. Hettiarachchi, M. Golubovic, W.M. Worek, Y. Ikegami. The performance of the kalina cycle system 11(KCS-11) with low-temperature heat sources. J Energ Resour, 129, 243–247, (2007).
• [25] V. Zare, S.M.S. Mahmoudi. A thermodynamic comparison between organic rankine and kalina cycles for waste heat recovery from the gas turbine-modular helium reactor. Energy, 79, 398–406, (2015).
• [26] S. Li, Y. Dai. Thermo-economic comparison of kalina and CO2 transcritical power cycle for low temperature geothermal sources in China. Appl. Therm. Eng., 70, 139–152, (2014).
• [27] K. Chunnanond, S. Aphornratana. Ejectors: applications in refrigeration technology. Renew. Sustain. Energy Rev., 8, 129–155, (2004).
• [28] C. Seckin, Effect of ejector internal efficiencies on cooling performance of an ejector expansion refrigeration cycle with a two phase ejector. In International Conference on Energy and Thermal Engineering: ICTE 2017, Istanbul, Turkey, 25–28 April, 152–161, (2017).
• [29] C. Seckin, Thermodynamic analysis of a combined power/refrigeration cycle: combination of kalina cycle and ejector refrigeration cycle. Energy Convers. Manage, 157, 631–643, (2018).
• [30] C. Seckin. Parametric analysis and comparison of ejector expansion refrigeration cycles with constant area and constant pressure ejectors. J Energy Resour,139, s042005-1–042005-10, (2017).
• [31] Seckin, C. Effect of operational parameters on a novel combined cycle of ejector refrigeration cycle and kalina cycle. J Energy Resour,142, 012001-1– 012001-11, (2020).
• [32] L. Boumaraf, A. Lallemand. Modeling of an ejector refrigerating system operating in dimensioning and off-dimensioning conditions with the working fluids R142b and R600a. Appl Therm Eng, 29, 265–274, (2009).
• [33] Z. Aidoun, K. Ameur, M. Falsafioon, M. Badache. Current advances in ejector modeling, experimentation and applications for refrigeration and heat pumps. part 1: single-phase ejectors. Inventions, 4, 1-73, (2019).
• [34] J. Wang, Y. Dai, T. Zhang, S. Ma. Parametric analysis for a new combined power and ejector absorption refrigeration cycle. Energy, 34(10), 1587–1593, (2009).
• [35] X.X. Xu, C. Liu, X. Fu, H. Gao, Y. Li. Energy and exergy analyses of a modified combined cooling, heating, and power system using supercritical CO2. Energy, 86, 414–422, (2015).
• [36] J.F. Wang, P. Zhao, X. Niu, Y. Dai. Parametric analysis of a new combined cooling, heating, and power system with transcritical CO2 driven by solar energy. Appl Energy, 94, 58–64, (2012).
• [37] A. Habibzadeh, M.M. Rashidi, N. Galanis. Analysis of a combined power and ejector refrigeration cycle using low temperature heat. Energy Convers Manage, 65, 381–391, (2013).
• [38] H. Ghaebi, H. Rostamzadeh, P.S. Matin. Performance evaluation of ejector expansion combined cooling and power cycles. Heat Mass Transf, 4, 1–17, , (2017).
• [39] O. Barkhordarian, A. Behbahaninia, R. Bahrampoury. A novel ammonia-water combined power and refrigeration cycle with two different cooling temperature levels. Energy, 120, 816–826, (2017).
• [40] W. Sun, X. Yue, Y. Wang. Exergy efficiency analysis of ORC (organic rankine cycle) and ORC-based combined cycles driven by low-temperature waste heat. Energy Convers Manage, 135, 63–73, (2017).
• [41] H. Ghaebi, T. Parikhani, H. Rostamzadeh, B. Farhang. Thermodynamic and thermoeconomic analysis and optimization of a novel combined cooling and power (CCP) cycle by integrating of ejector refrigeration and kalina cycles. Energy, 139, 262–276, (2017).
• [42] G. Besagni, R. Mereu, F. Inzoli. Ejector refrigeration: a comprehensive review. Renew Sustain Energy Rev, 53, 373–407, (2016).
• [43] J.A.E. Carrillo, S. de La Flor, J.M. Salmeron Lissen. Thermodynamic comparison of ejector cooling cycles. ejector characterization by means of entrainment ratio and compression efficiency. Int. J. Refrig., 74, 371–384, (2017).
• [44] M. Sokolov, D. Hershgal. Enhanced ejector refrigeration cycles powered by low grade heat. Part 1. Systems characterization. Int. J. Refrig., 13, 351-356, (1990).
• [45] E. Thorin. Power cycles with ammonia-water mixtures as working fluid - analysis of different applications and the influence of thermophysical properties. Diss. Royal Institute of Technology, Stockholm, Sweden, (2000).
• [46] S. Ogriseck. Integration of kalina cycle in a combined heat and power plant, a case study. Appl. Therm. Eng., 29, 2843–2848, (2009).
• [47] R. Yapıcı, H.K. Ersoy. Performance characteristics of the ejector refrigeration system based on the constant area ejector flow model. Energy Convers. Manage., 46, 3117–3135, (2005).
• [48] H.K. Ersoy, S. Yalcin, R. Yapici, M. Ozgoren Performance of a solar ejector cooling-system in the southern region of Turkey. Appl. Energy, 84, 971–983, (2007).
• [49] A. Khalil, M. Fatouh, E. Elgendy. Ejector design and theoretical study of R134a ejector refrigeration cycle. Int. J. Refrig., 34(7), 1684–1698, (2011).
• [50] L. Cao, J. Wang, Y. Dai. Thermodynamic analysis of a biomass-fired kalina cycle with regenerative heater. Energy, 77, 760–770, (2014).
• [51] M. Ahmad, M.N. Karimi. Thermodynamic analysis of kalina cycle. Int. J. Sci. Res., 5, 2244–2249, (2016).
• [52] G.K. Alexis, E.K. Karayiannis. A solar ejector cooling system using refrigerant R134a in the Athens area. Renewable Energy, 30, 1457–1469, (2005).
• [53] R.E. Henry, H.K. Fauske. The two-phase critical flow of one component mixtures in nozzles, orifices, and short tubes. J Heat Transf, 93, 179–187, (1971).
• [54] C. Seckin. Investigation of the effect of the primary nozzle throat diameter on the evaporator performance of an ejector expansion refrigeration cycle. J. Therm. Eng., 4, 1939-1953, (2018).
• [55] M. Hassanain, E. Elgendy, M. Fatouh. Ejector expansion refrigeration system: ejector design and performance evaluation. Int J Refrig., 58, 1–13, (2015).
• [56] F.H. Shu, The physics of astrophysics. Vol.2: Gas dynamics. University Science Books, Mill Valley, (1991).
• [57] J. Szargut, D.R. Morris, F.R. Steward. Exergy analysis of thermal, chemical, and metallurgical processes. Hemisphere Publishing Corporation, NY, USA, (1988).
• [58] M. Atmaca, C. Ezgi. Three-dimensional CFD modeling of a steam ejector. Energy Sources A: Recovery Util. Environ. Eff., 44, 2236-2247, (2022).
• [59] M. Gumus, M. Atmaca. Energy and exergy analyses applied to a CI engine fueled with diesel and natural gas. Energy Sources A: Recovery Util. Environ. Eff., 35, 1017–1027, (2013).