Abstract
In the
present work the influence of heating on the flexural resistance of ferrocement
slab specimens are carried out. A total of one hundred
and sixty eight ferrocement slab specimens 300*300 mm were cast, cured, heated,
and tested under central point loads. The main parameters were 30oC
(room temperature), 100-800oC with a
graduation of 100oC, mixing ratio of
cement to sand (c: s), thickness, and number of wire mesh layers. The behavior
of specimens was observed by reading the load-deflection at the central point
of the specimen. In addition, the effect of heating on the compressive strength
of cement mortar, and wire mesh used in casting the specimens were studied. It
is concluded that the strength of ferrocement slab specimens were dropped sharply
at a temperatures between 500-700oC and the specimens were damaged
at 800oC. Also in crack stage, the slope of load-deflection curves
were decreased and approaches zero at temperature 700oC.
References
- Nimityongskul, V.P., Tanchaisawat, T., Parichartpreecha, R. “Thermal conductivity of ferrocement.” 11th East Asia-Pacific Conference on Structural Engineering and Construction, EASEC-11, Taipei (Taiwan), 19-21 November. 2008.
- Al-Rifaie, W.N., Mahdi, O.M., Ahmed, W.K. “Development of Nanocement Mortar as a Construction Material.” Advanced Materials Research. 795, 684-691. 2013. DOI: 10.4028/www.scientific.net/AMR.795.684
- Al-Rifaie, W.N., Ahmed, W.K., Mahdi, O.M. “Experimental Investigation of Nano-Polymercement Composite.” Study of Civil Engineering and Architecture. 3, 29-35, 2014. http://www.seipub.org/scea/PaperInfo.aspx?ID=17597
- Al Rifaie, W.N., Ahmed, W.K., Ibraheem, L.E., Al-Samarraie, H.Y. “The Use of Renewable Energy in Ferrocement Eco-Housing System.” International Journal of Renewable Energy Research. 4(1). 151-158, 2014. http://www.ijrer.org/ijrer/index.php/ijrer/article/view/1051/0
- ASTM Standards A 82-85."Steel Wire, Plain, for Concrete Reinforcement", Vol. 01.04.
Abstract
References
- Nimityongskul, V.P., Tanchaisawat, T., Parichartpreecha, R. “Thermal conductivity of ferrocement.” 11th East Asia-Pacific Conference on Structural Engineering and Construction, EASEC-11, Taipei (Taiwan), 19-21 November. 2008.
- Al-Rifaie, W.N., Mahdi, O.M., Ahmed, W.K. “Development of Nanocement Mortar as a Construction Material.” Advanced Materials Research. 795, 684-691. 2013. DOI: 10.4028/www.scientific.net/AMR.795.684
- Al-Rifaie, W.N., Ahmed, W.K., Mahdi, O.M. “Experimental Investigation of Nano-Polymercement Composite.” Study of Civil Engineering and Architecture. 3, 29-35, 2014. http://www.seipub.org/scea/PaperInfo.aspx?ID=17597
- Al Rifaie, W.N., Ahmed, W.K., Ibraheem, L.E., Al-Samarraie, H.Y. “The Use of Renewable Energy in Ferrocement Eco-Housing System.” International Journal of Renewable Energy Research. 4(1). 151-158, 2014. http://www.ijrer.org/ijrer/index.php/ijrer/article/view/1051/0
- ASTM Standards A 82-85."Steel Wire, Plain, for Concrete Reinforcement", Vol. 01.04.
Details
| Subjects | Mechanical Engineering |
|---|---|
| Journal Section | Research Articles |
| Authors | |
| Publication Date | January 15, 2017 |
| Acceptance Date | July 31, 2017 |
| Published in Issue | Year 2017 Volume: 1 Issue: 1 |
Cited By
Ferrocementin Yapay Kaya ve Heykel Yapımında Kullanımı
Teknik Bilimler Dergisi
https://doi.org/10.35354/tbed.933455
Journal of Energy Systems is the official journal of
European Conference on Renewable Energy Systems (ECRES) and
Electrical and Computer Engineering Research Group (ECERG)
JES is licensed to the public under a Creative Commons Attribution 4.0 license.