Performance Evaluation of Working Model of Abrasive Jet Machining

Year 2020, Volume: 4 Issue: 1, 1 - 9, 30.12.2020

Rohıt Pandey

Abstract

Primarily focuses on the analysis the performance and design of the machine that uses mixture of air and abrasive particle to flow it at high pressure to hit work piece at high velocity to perform process, and is entitled as Abrasive Jet Machine. The basic objective of this paper is to come up with mechanical machine that can be operated easily and reliably with the help of simple elements, to provide appropriate amount of efficiency in a quick response and easy way. As abrasive jet machine (AJM) is the equally consider as sand basting process and effectively capable of removing hard and brittle materials. It’s the future crucial machine because work on fabric and brittle material is increasing day by day. It is verified for micro machining. There are various factors which are analysed while processing such as the type of abrasive materials, material removal rate (MRR), diameter of holes, nozzle tip distance (NTD), and erosion rate.

Keywords

Abrasive jet machining, MRR, NTD, wear nozzle diameter, air pressure, compressed gas

Supporting Institution

NIL

Project Number

NIL

Thanks

THANKS

References

• [1] Ke, J. H., Tsai, F. C., Hung, J. C., & Yan, B. H. (2012). Characteristics study of flexible magnetic abrasive in abrasive jet machining. Procedia CIRP, 1, 679-680.
• [2] Kumar, A., & Hiremath, S. S. (2016). Machining of micro-holes on sodalime glass using developed Micro-Abrasive Jet Machine (μ-AJM). Procedia Technology, 25, 1234-1241.
• [3] Bery, S. (1987). Directory of building and housing research and development institutions in India.
• [4] D. J. Tidke:Department of Mechanical Engineering, Visvesvaraya Regional College of Engineering, Nagpur, Maharashtra, 440 011, India.
• [5] Balasubramanian, M., & Madhu, S. (2019). Evaluation of delamination damage in carbon epoxy composites under swirling abrasives made by modified internal threaded nozzle. Journal of Composite Materials, 53(6), 819-833.
• [6] Madhu, S., & Balasubramanian, M. (2018). Effect of swirling abrasives induced by a novel threaded nozzle in machining of CFRP composites. The International Journal of Advanced Manufacturing Technology, 95(9-12), 4175-4189.
• [7] V.C. Venkatesh:Faculty of Engineering, National University of Singapore, Singapore 0511, Singapore.
• [8] T.N. Goh: Faculty of Engineering, National University of Singapore, Singapore 0511, Singapore.
• [9] Wong, K. H: National University of Singapore, Singapore City, Singapore.
• [10] Benedict, G. (2017). Nontraditional manufacturing processes. Routledge.
• [11] Hours, T., & Marks, W. I. MANAGEMENT AND ENGINEERING ECONOMICS [AS PER CHOICE BASED CREDIT SYSTEM (CBCS) SCHEME] SEMESTER–V.
• [12] Jain, V. K. (2009). Advanced machining processes. Allied publishers.
• [13] Mishra, P. K. The Institution of Engineers (India) Textbook Series.“. Nonconventional Machining” Narosa Publishing House Pvt. Ltd, 22.
• [14] Balasubramaniam, R., Krishnan, J., & Ramakrishnan, N. (1998). Investigation of AJM for deburring. Journal of Materials Processing Technology, 79(1-3), 52-58.
• [15] Ally, S., Spelt, J. K., & Papini, M. (2012). Prediction of machined surface evolution in the abrasive jet micro-machining of metals. wear, 292, 89-99.
• [16] Pawar, N. S., Lakhe, R. R., & Shrivastava, R. L. (2013). A comparative Experimental Analysis of Sea sand as an abrasive material using Silicon carbide and mild steel Nozzle in vibrating chamber of Abrasive Jet machining process. Int. J. Sci. Res. Publ, 3(10), 1-4.
• [17] Shukla, R., & Singh, D. (2017). Experimentation investigation of abrasive water jet machining parameters using Taguchi and Evolutionary optimization techniques. Swarm and Evolutionary Computation, 32, 167-183.
• [18] Ghobeity, A., Krajac, T., Burzynski, T., Papini, M., & Spelt, J. K. (2008). Surface evolution models in abrasive jet micromachining. Wear, 264(3-4), 185-198.