jnse Journal of Naval Sciences and Engineering 1304-2025 Millî Savunma Üniversitesi 10.56850/jnse.1846478 Naval Architecture Gemi İnşaatı ONRT FORMUNUN HAVA İZİNİN CVG KULLANARAK KONTROLÜ AIRWAKE CONTROL OF ONR TUMBLEHOME USING CVG https://orcid.org/0009-0009-8440-7919 Kıyak Bekir Kürşat YILDIZ TEKNİK ÜNİVERSİTESİ https://orcid.org/0000-0002-0665-5046 Sarı Sarih YILDIZ TEKNİK ÜNİVERSİTESİ https://orcid.org/0000-0003-3236-555X Doğrul Ali MİLLİ SAVUNMA ÜNİVERSİTESİ, DENİZ HARP OKULU https://orcid.org/0000-0002-1554-353X Bayraktar Seyfettin YILDIZ TEKNİK ÜNİVERSİTESİ Advanced Online Publication 189 216 12 21 2025 03 09 2026 Copyright © 2003, Journal of Naval Sciences and Engineering 2003 Journal of Naval Sciences and Engineering

Gemilerin aerodinamik tasarımındaki gelişmelerle birlikte, gemi aerodinamiği çalışmaları son yıllarda artış göstermektedir. Gemi üst yapıları, üst yapıda bulunan sistemlerin ve sensörlerin daha iyi performans göstermesi için titizlikle tasarlanmaktadır. Ayrıca, geminin iniş ve kalkış operasyonları için bir uçuş güvertesine sahip olduğu durumlarda, gemi-helikopter etkileşimi de ön plana çıkmaktadır. Bu çalışmada, iyi bilinen bir kıstas model olan ONRT’nin model ölçeğindeki hava izi yapısının kapsamlı bir doğrulaması yapılmıştır. Sayısal analizler, altı yüzlü sonlu hacim elemanları kullanılarak zamana bağlı RANS denklemlerinin çözülmesiyle gerçekleştirilmiştir. Hesaplama alanında daha gerçekçi bir hız profili oluşturmak amacıyla Atmosferik Sınır Tabaka (ABL) modeli kullanılmıştır. Doğrulama çalışmalarının ardından, hava akımının pasif kontrolcüsü olarak sütunlu girdap üreteci (CVG) tasarlanmış ve gemi üst yapısına entegre edilmiştir. CVG’lerin gemi üzerine yerleştirilmesiyle hava izi yapısında kayda değer bir iyileşme gözlemlenmiştir. Uygun CVG geometrisinin kullanımı, geri akış bölgesini ve yeniden tutunma uzunluğunu kısaltmıştır. Bu bulgu, uçuş güvertesi üzerindeki türbülans yoğunluğunun ve dalgalanmaların azalmasını sağlamaktadır.

Ship aerodynamics studies are increasing in recent years due to the developments in aerodynamic design of the ships. Ship superstructures are designed carefully for better performance of systems and sensors located on the superstructure. Also ship-helicopter interaction comes into mind when the ship has a flight deck for landing and take-off operations. In this study, a comprehensive validation of ship airwake was made for the well-known benchmark model, ONR Tumblehome (ONRT), in model scale. Numerical analyses were carried out solving the unsteady RANS equations with hexahedral finite volume elements. Atmospheric boundary layer (ABL) was used to create more realistic velocity profile in the computational domain. Following the validation, columnar vortex generators (CVG) were designed and integrated to the ship superstructure as the passive controller of the airwake. Impressive healing on the airwake was observed when CVG is located on the ship. The use of appropriate CVG geometry shortened the recirculation region and the reattachment length. This finding leads to lower turbulence intensity and fluctuations over the flight deck.

 ABL Airwake Columnar Vortex Generator URANS ABL Hava izi Sütunlu Girdap Üreteci URANS. Bardera, R., Rodríguez-Sevillano, A. A., Matías, J. C., Barroso, E., Ojeda, M., & Fernández, J. (2024, September 9). Exploring Wingtip Columnar Vortex Generators for UAV Performance Enhancement. 34th Congress of the International Council of the Aeronautical Sciences, Florence. Blocken, B., Stathopoulos, T., & Carmeliet, J. (2007). CFD Simulation of the Atmospheric Boundary Layer: Wall Function Problems. Atmospheric Environment, 41(2), 238–252. Celik, I. B., Ghia, U., Roache, P. J., Freitas, C. J., & Raad, P. E. (2008). Procedure for Estimation and Reporting of Uncertainty Due to Discretization in CFD Applications. Journal of Fluids Engineering, 130(7). https://doi.org/10.1115/1.2960953 Cindori, M., Čajić, P., Džijan, I., Juretić, F., & Kozmar, H. (2022). A comparison of major steady RANS approaches to engineering ABL simulations. Journal of Wind Engineering and Industrial Aerodynamics, 221, 104867. Cook, N. J. (1997). The Deaves and Harris ABL model applied to heterogeneous terrain. Journal of Wind Engineering and Industrial Aerodynamics, 66(3), 197–214. Cosner, R., Oberkampf, B., Rumsey, C., Rahaim, C., & Shih, T. (2006). AIAA Committee on Standards for Computational Fluid Dynamics: Status and Plans. In 44th AIAA Aerospace Sciences Meeting and Exhibit. American Institute of Aeronautics and Astronautics. https://doi.org/10.2514/6.2006-889 Dooley, G. M., Krebill, A. F., Martin, J. E., Buchholz, J. H. J., & Carrica, P. M. (2020). Structure of a Ship Airwake at Multiple Scales. AIAA Journal, 58(5), 2005–2013. Driver, D. M., Seegmiller, H. L., & Marvin, J. G. (1987). Time-dependent behavior of a reattaching shear layer. AIAA Journal, 25(7), 914–919. Forrest, J. S., & Owen, I. (2010). An Investigation of Ship Airwakes Using Detached-Eddy Simulation. Computers & Fluids, 39(4), 656–673. https://doi.org/10.1016/j.compfluid.2009.11.002 ITTC. (2014). 7.5-03-01-01 Uncertainty Analysis in CFD, Verification and Validation Methodology and Procedures. In ITTC - Recommended Procedures and Guidelines. Kurban, E., & Rauleder, J. (2025, May 20). Lattice-Boltzmann Ship Airwake Simulation with Atmospheric Boundary Layer Inflow Using Synthetic Eddy Method. Vertical Flight Society Annual Forum & Technology Display - Forum 81. Kurban, E., Toxopeus, S., & Rauleder, J. (2025). Assessment of Lattice-Boltzmann velocity set and floating-point precision for ship airwake analysis compared to RANS–LES and experiment. Ocean Engineering, 326, 120788. Lamar, J. E., Landman, D., Swift, R. S., & Parikh, P. C. (2007). Subscale Ship Airwake Studies Using Novel Vortex Flow Devices with Smoke, Laser-Vapor-Screen and Particle Image Velocimetry (No. 20070034826). NASA. Li, G., Wang, Q., Zhao, Q., Zhao, G., Feng, F., & Wu, L. (2023). A Research on Rotor/Ship Wake Characteristics under Atmospheric Boundary Layer Conditions. Aerospace, 10(9). https://doi.org/10.3390/aerospace10090816 Mazzilli, G., Zhu, N., Zhang, Z., Gnanamanickam, E., & Leishman, J. G. (2025). A Conditional Perspective of the Ship Airwake. AIAA Journal, 1–17. Menter, F. R. (1994). Two-equation eddy-viscosity turbulence models for engineering applications. AIAA Journal, 32(8), 1598–1605. https://doi.org/10.2514/3.12149 Richards, P. J., & Hoxey, R. P. (1993). Appropriate boundary conditions for computational wind engineering models using the k-ϵ turbulence model. Journal of Wind Engineering and Industrial Aerodynamics, 46–47, 145–153. Richardson, L. F. (1911). The Approximate Arithmetical Solution by Finite Differences of Physical Problems Involving Differential Equations, with an Application to the Stresses in a Masonry Dam. Philosophical Transactions of the Royal Society of London. Series A, Containing Papers of a Mathematical or Physical Character, 210, 307–357. Roache, P. J. (1997). Quantification of uncertainty in computational fluid dynamics. Annual Review of Fluid Mechanics, 29, 123–160. Scopus. https://doi.org/10.1146/annurev.fluid.29.1.123 Roache, P. J. (1998). Verification of Codes and Calculations. AIAA Journal, 36(5), 696–702. https://doi.org/10.2514/2.457 Sari, S., Dogrul, A., & Bayraktar, S. (2022, May). The aerodynamic wind loads of a naval surface combatant in model scale. International Conference “New Technologies, Development and Applications. Sari, S., Dogrul, A., & Bayraktar, S. (2025). Airwake Characteristics of NATO-Generic Destroyer: A Numerical Study. Journal of Applied Fluid Mechanics, 18(1), 112–130. https://doi.org/10.47176/jafm.18.1.2886 Seth, D., Leishman, J. G., Gnanamanickam, E., & Zhang, Z. (2021). Time-Resolved Ship Airwake Measurements in a Simulated Atmospheric Boundary Layer. Journal of Aircraft, 58(3), 624–649. Setiawan, H., & Bhirawa, T. (2025). Mapping extreme vertical forces induced by air-wake on a simplified ship model. Marine Systems & Ocean Technology, 20(3), 29. Shukla, S., Sinha, S. S., & Singh, S. N. (2019). Ship-Helo Coupled Airwake Aerodynamics: A Comprehensive Review. Progress in Aerospace Sciences, 106, 71–107. Thornhill, E., Wall, A., McTavish, S., & Lee, R. (2020). Ship Anemometer Bias Management. Ocean Engineering, 216, 107843. Xing, T., & Stern, F. (2010). Factors of Safety for Richardson Extrapolation. Journal of Fluids Engineering, 132(6). https://doi.org/10.1115/1.4001771 Yang, X., Li, B., Nie, Y., Ren, Z., & Tian, F. (2025). Transient Simulation of Aerodynamic Load Variations on Carrier-Based Aircraft During Recovery in Carrier Airwake. Aerospace, 12(8), 656. Yuan, W., Wall, A., & Lee, R. (2018). Combined Numerical and Experimental Simulations of Unsteady Ship Airwakes. Computers & Fluids, 172, 29–53. https://doi.org/10.1016/j.compfluid.2018.06.006 Yuan, W., Wall, A., & Sideroff, C. (2025). Simulations of unsteady airwakes behind moving ships using a mesh morphing technique. Ocean Engineering, 340, 122288. https://doi.org/10.1016/j.oceaneng.2025.122288 Zamiri, A., & Chung, J. T. (2025). Numerical assessment of incoming atmospheric boundary layer effects generated by various approaches on ship airwake turbulence characteristics. Ocean Engineering, 315, 119764. Zhu, N. (2021). Analysis of Ship Airwakes Using Modal Decomposition [MSc Thesis]. Embry-Riddle Aeronautical University.