NUMERICAL INVESTIGATION OF THE TIE BEAM EFFECT IN BRICK WALLS

Abstract

Brick walls are load-bearing elements commonly found in historical and traditional structures. The behaviour and capacity of these structures under seismic effects must be investigated from various perspectives. Numerous studies exist in the literature to determine the in-plane behaviour of brick walls under different conditions. However, there has been insufficient research on timber tie beams, which are frequently used in wall construction and form part of the load-bearing structure. In this context, a numerical study was conducted to determine the effect of different tie beam configurations on the structural behaviour of brick walls and to address this gap in the literature. In this regard, the effects of horizontal and vertical timber tie beams were investigated in solid walls and wall models with openings. Ten different wall configurations were examined in the study. The wall models were constructed using brick material and mortar mixed with lime. A simplified micro-modelling approach was used in ABAQUS to define the cohesive interface between the brick units and represent the mortar. The walls were analysed using displacement control in the in-plane direction. Sensitivity analyses were performed to obtain a realistic representation of the tie beam-wall behaviour. Load-displacement curves, compression and shear stress distributions, elastic and plastic deformation changes, and failure mechanisms were evaluated in wall models. According to the results, the horizontal resistance of walls with timber tie beam elements decreased. Increasing the number of horizontal and vertical tie beams reduced the performance of the walls. It has been determined that the tie beam arrangement significantly changes the crack distribution and failure mechanism. These results indicate that the use of tie beams in lime-mortar brick walls does not improve horizontal load performance.

Keywords

• Brick wall
• Horizontal load capacity
• Micro-modelling
• Tie beam

Supporting Institution

There is no fundation

Ethical Statement

This study complies with all ethical guidelines. No ethical approval was required, and no human or animal subjects were involved.

References

1. M. Schildkamp, R. Marques, Y. Araki, and S. Silvestri, “Preservation of stone masonry buildings: Benchmarking of modelling approaches for seismic assessment and international call to action,” in SÍSMICA 2024 – 13o Congresso Nacional de Sismologia e Engenharia Sísmica, Apr. 2024.
2. F. Kıpçak and B. Erdil, “Yığma yapıların düzlem dışı davranışlarına yan duvarın ve yan duvar boşluğunun etkisi,” Niğde Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi, vol. 12, no. 3, pp. 853–860, Jul. 2023, doi: 10.28948/NGUMUH.1268912.
3. M. Schildkamp and Y. Araki, “Cost analysis of mountain schools in Nepal: Comparison of earthquake resistant features in rubble stone masonry vs. concrete block masonry,” Frontiers in Built Environment, vol. 5, 2019, doi: 10.3389/fbuil.2019.00055.
4. F. Kıpçak, “Numerical study of the out-of-plane response of dry-stack double-wythe brick walls with header bricks,” Buildings, vol. 15, no. 23, 2025, doi: 10.3390/buildings15234342.
5. F. Kıpçak and B. Erdil, “Effect of adobe wall shapes and openings on out-of-plane behavior,” Structures, vol. 77, p. 109090, Jul. 2025, doi: 10.1016/j.istruc.2025.109090.
6. B. Erdil, F. Korkut, M. Aydin, and N. Yaltay, “Structural performance of masonry buildings under harsh climate and seismic loads,” Iranian Journal of Science and Technology, Transactions of Civil Engineering, vol. 46, no. 6, pp. 4031–4049, 2022, doi: 10.1007/s40996-022-00877-y.
7. G. Vlachakis, E. Vlachaki, and P. B. Lourenço, “Learning from failure: Damage and failure of masonry structures after the 2017 Lesvos earthquake (Greece),” Engineering Failure Analysis, vol. 117, p. 104803, Nov. 2020, doi: 10.1016/j.engfailanal.2020.104803.
8. SBB Report, “2023 Kahramanmaraş ve Hatay depremleri raporu,” Strateji ve Bütçe Bakanlığı, 2023. [Online]. Available: https://www.sbb.gov.tr/wp-content/uploads/2023/03/2023-Kahramanmaras-ve-Hatay-Depremleri-Raporu.pdf

9. R. İzol, E. Işık, F. Avcil, M. H. Arslan, E. Arkan, and A. Büyüksaraç, “Seismic performance of masonry structures after the 06 February 2023 earthquakes: Site survey and FE modelling approach,”Soil Dynamics and Earthquake Engineering, vol. 186, p. 108904, 2024, doi: 10.1016/j.soildyn.2024.108904.
10. M. S. Ökten and A. Yüce, “Yığma yapılarda günümüzde yapılan hatıl uygulamaları,” Avrupa Bilim ve Teknoloji Dergisi, no. 52, pp. 259–271, 2023. [Online]. Available: https://dergipark.org.tr/tr/pub/ejosat/issue//1339624
11. B. Khadka and M. Shakya, “Seismic characteristics of unreinforced mud masonry houses in Nepal: A miserable scenario before and after the 2015 Gorkha (Nepal) earthquake,” Engineering Failure Analysis, vol. 124, p. 105308, Jun. 2021, doi: 10.1016/j.engfailanal.2021.105308.
12. R. Carabbio, L. Pieraccini, S. Silvestri, and M. Schildkamp, “How can vernacular construction techniques sustain earthquakes: The case of the Bhatar buildings,” Frontiers in Built Environment, vol. 4, 2018, doi: 10.3389/fbuil.2018.00018.
13. B. Erdil, F. Kıpçak, and M. Tapan, “Out-of-plane behavior of dry-stack brick masonry walls,” The Structural Design of Tall and Special Buildings, vol. 33, no. 5, p. e2089, Apr. 2024, doi: 10.1002/tal.2089.
14. M. Schildkamp and Y. Araki, “School buildings in rubble stone masonry with cement mortar in seismic areas: Literature review of seismic codes, technical norms and practical manuals,” Frontiers in Built Environment, vol. 5, 2019, doi: 10.3389/fbuil.2019.00013.
15. R. A. Oyguç, “2011 Van depremlerinden sonra yığma yapılarda gözlemlenen hasarlar,” Balıkesir Üniversitesi Fen Bilimleri Enstitüsü Dergisi, vol. 19, no. 2, pp. 296–315, 2017, doi: 10.25092/baunfbed.348482.
16. M. Alforno, F. Venuti, A. Monaco, and C. Calderini, “Numerical investigation of the influence of constructive aspects on the structural behaviour of masonry cross vaults,” International Journal of Architectural Heritage, vol. 17, no. 6, pp. 868–891, Jun. 2023, doi: 10.1080/15583058.2021.1992534.
17. S. Szabó, M. F. Funari, A. M. D’Altri, S. de Miranda, and P. B. Lourenço, “An optimised multi-level method for the pushover analysis of historic masonry structures accounting for the actual masonry pattern,” Computers and Structures, vol. 310, p. 107656, 2025, doi: 10.1016/j.compstruc.2025.107656.
18. F. Kıpçak and B. Erdil, “Experimental evaluation of multi-layer brick and adobe materials,” Adıyaman Üniversitesi Mühendislik Bilimleri Dergisi, vol. 12, no. 26, pp. 266–280, 2025, doi: 10.54365/adyumbd.1702071.
19. F. Yavartanoo, T. Kim, J. Kim, H. Jang, and C. S. Kim, “Out-of-plane behavior of U-shaped unreinforced masonry structures,” Journal of Building Engineering, vol. 86, 2024, doi: 10.1016/j.jobe.2024.108984.
20. E. Nasiri and Y. Liu, “The out-of-plane behaviour of concrete masonry infills bounded by reinforced concrete frames,” Engineering Structures, vol. 184, pp. 406–420, Apr. 2019, doi: 10.1016/j.engstruct.2019.01.098.
21. L. F. Restrepo-Vélez, G. Magenes, and M. C. Griffith, “Dry stone masonry walls in bending—Part I: Static tests,” International Journal of Architectural Heritage, vol. 8, no. 1, pp. 1–28, Oct. 2014, doi: 10.1080/15583058.2012.663059.
22. A. H. Al-Zuhairi and A. R. Ahmed, “Height-to-length ratio effect on the response of unreinforced masonry wall subjected to vertical load using detailed-micro modeling approach,” International Journal of Science and Research (IJSR), vol. 7, no. 1, pp. 1456-1462, Oct. 2018, doi: 10.21275/art20179673.
23. E. García-Macías and F. Ubertini, “Earthquake-induced damage detection and localization in masonry structures using smart bricks and Kriging strain reconstruction: A numerical study,” Earthquake Engineering & Structural Dynamics, vol. 48, no. 5, pp. 548–569, Apr. 2019, doi: 10.1002/eqe.3148.
24. Ö. Y. Karaman and M. T. Zeren, “Geleneksel Türk konutunda kullanılan ve kârgir sistemi destekleyen ahşap yapısal elemanların önemi ve bozulma nedenleri,” Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi, vol. 12, no. 2, pp. 75–87, 2010.
25. B. Borah, H. B. Kaushik, and V. Singhal, “Analysis and design of confined masonry structures: Review and future research directions,” Buildings, vol. 13, no. 5, 2023, doi: 10.3390/buildings13051282.
26. M. Akgül and O. Doğan, “4 Nisan 2019 Elazığ-Sivrice depreminin yığma yapılara etkisinin değerlendirilmesi,” International Journal of Engineering Research and Development, vol. 12, no. 1, pp. 265–277, 2020, doi: 10.29137/umagd.621701.
27. H. Maccarini, G. Vasconcelos, H. Rodrigues, J. Ortega, and P. B. Lourenço, “Out-of-plane behavior of stone masonry walls: Experimental and numerical analysis,” Construction and Building Materials, vol. 179, pp. 430–452, Aug. 2018, doi: 10.1016/j.conbuildmat.2018.05.216.
28. J. Wu, Y. Y. Lv, S. S. Yin, and Q. Wang, “Shaking table test of a new type insulation decorative block wall under out-of-plane loading,” Shock and Vibration, vol. 2022, 2022, doi: 10.1155/2022/7423912.
29. D. Malomo, R. Pinho, and A. Penna, “Simulating the shake table response of unreinforced masonry cavity wall structures tested to collapse or near-collapse conditions,” Earthquake Spectra, vol. 36, no. 2, pp. 554–578, Feb. 2020, doi: 10.1177/8755293019891715.
30. B. Doran, N. Yuzer, S. Aktan, D. Oktay, and S. Ulukaya, “Numerical modeling of traditional masonry walls strengthened with grout injection,” International Journal of Architectural Heritage, vol. 14, no. 10, pp. 1517–1532, Nov. 2020, doi: 10.1080/15583058.2019.1618970.
31. L. Garcia-Ramonda, L. Pelà, P. Roca, and G. Camata, “Cyclic shear-compression testing of brick masonry walls repaired and retrofitted with basalt textile reinforced mortar,” Composite Structures, vol. 283, p. 115068, Mar. 2022, doi: 10.1016/j.compstruct.2021.115068.
32. P. X. Candeias, A. Campos Costa, N. Mendes, A. A. Costa, and P. B. Lourenço, “Experimental assessment of the out-of-plane performance of masonry buildings through shaking table tests,” International Journal of Architectural Heritage, vol. 11, no. 1, pp. 31–58, 2017, doi: 10.1080/15583058.2016.1238975.
33. K. F. Abdulla, L. S. Cunningham, and M. Gillie, “Simulating masonry wall behaviour using a simplified micro-model approach,” Engineering Structures, vol. 151, pp. 349–365, Nov. 2017, doi: 10.1016/j.engstruct.2017.08.021.
34. P. B. Lourenço and J. G. Rots, “Multisurface interface model for analysis of masonry structures,” Journal of Engineering Mechanics, vol. 123, no. 7, pp. 660–668, Jul. 1997, doi: 10.1061/(ASCE)0733-9399(1997)123:7(660).
35. C. Casapulla and L. U. Argiento, “The comparative role of friction in local out-of-plane mechanisms of masonry buildings: Pushover analysis and experimental investigation,” Engineering Structures, vol. 126, pp. 158–173, Feb. 2016, doi: 10.1016/j.engstruct.2016.07.036.
36. A. M. D’Altri, S. de Miranda, G. Castellazzi, and V. Sarhosis, “A 3D detailed micro-model for the in-plane and out-of-plane numerical analysis of masonry panels,” Computers and Structures, vol. 206, pp. 18–30, Aug. 2018, doi: 10.1016/j.compstruc.2018.06.007.
37. S. Ahmad, R. Khan, and H. Gupta, “Seismic performance of a masonry heritage structure,” International Journal of Engineering and Advanced Technology (IJEAT), vol. 3, no. 4, Apr. 2014. [Online]. Available: [suspicious link removed]. [Accessed: Jan. 15, 2021].
38. K. F. Abdulla, L. S. Cunningham, and M. Gillie, “Effectiveness of strengthening approaches for existing earthen construction,” in Proceedings of Structural Faults & Repair 2018: 17th International Conference, 2018, p. 1. [Online]. Available: http://man.ac.uk/04Y6Bo. [Accessed: Nov. 5, 2023].
39. A. Costigan, S. Pavía, and O. Kinnane, “An experimental evaluation of prediction models for the mechanical behavior of unreinforced, lime-mortar masonry under compression,” Journal of Building Engineering, vol. 4, pp. 283–294, Dec. 2015, doi: 10.1016/j.jobe.2015.10.001.
40. M. Doğan, “Seismic analysis of traditional buildings: Bagdadi and Himis,” Anadolu University Journal of Science and Technology A—Applied Sciences and Engineering, vol. 11, no. 1, pp. 35–45, 2010. [Online]. Available: https://dergipark.org.tr/en/pub/aubtda/issue//42100
41. Å. Bolmsvik, A. Linderholt, A. Brandt, and T. Ekevid, “FE modelling of lightweight wooden assemblies: Parameter study and comparison between analyses and experiments,” Engineering Structures, vol. 73, pp. 125–142, 2014, doi: 10.1016/j.engstruct.2014.04.028.
42. A. B. A. E. Mohamad and Z. Chen, “Experimental and numerical analysis of the compressive and shear behavior for a new type of self-insulating concrete masonry system,” Applied Sciences, vol. 6, no. 9, p. 245, Aug. 2016, doi: 10.3390/app6090245.
43. A. L. Abbas and M. H. Saeed, “Simulation of two-storey house of masonry wall under the earthquake load,” Diyala Journal of Engineering Sciences, vol. 12, no. 2, pp. 1–12, Jun. 2019, doi: 10.24237/DJES.2019.12201.
44. A. Abasi, R. Hassanli, T. Vincent, and A. Manalo, “Influence of prism geometry on the compressive strength of concrete masonry,” Construction and Building Materials, vol. 264, p. 120182, Dec. 2020, doi: 10.1016/j.conbuildmat.2020.120182.
45. N. D. Agüera, M. E. Tornello, and C. D. Frau, “Structural response of unreinforced masonry walls,” Journal of Civil Engineering and Architecture, vol. 10, no. 2, pp. 219–231, Feb. 2016, doi: 10.17265/1934-7359/2016.02.011.
46. L. S. Rainone, V. Tateo, S. Casolo, and G. Uva, “About the use of concrete damage plasticity for modeling masonry post-elastic behavior,” Buildings, vol. 13, no. 8, p. 1915, Jul. 2023, doi: 10.3390/buildings13081915.
47. J. Lubliner, J. Oliver, S. Oller, and E. Oñate, “A plastic-damage model for concrete,” International Journal of Solids and Structures, vol. 25, no. 3, pp. 299–326, Jan. 1989, doi: 10.1016/0020-7683(89)90050-4.
48. J. Lee and G. L. Fenves, “Plastic-damage model for cyclic loading of concrete structures,” Journal of Engineering Mechanics, vol. 124, no. 8, pp. 892–900, Aug. 1998, doi: 10.1061/(ASCE)0733-9399(1998)124:8(892).
49. A. Wosatko, A. Winnicki, M. A. Polak, and J. Pamin, “Role of dilatancy angle in plasticity-based models of concrete,”Archives of Civil and Mechanical Engineering, vol. 19, no. 4, 2019, doi: 10.1016/j.acme.2019.07.003.
50. M. Annecchiarico, F. Portioli, and R. Landolfo, “Micro and macro-finite element modeling of brick masonry panels subject to lateral loadings,” in Proc., COST C26 Action Final Conf., 2010. [Online]. Available: https://www.researchgate.net/publication/289195463_Micro_and_macro-finite_element_modeling_of_brick_masonry_panels_subject_to_lateral_loadings. [Accessed: Nov. 5, 2023].
51. L. Guo, R. Mao, Z. Liu, S. Li, G. Wu, and Z. Wang, “Dynamic large deflection response of RC beams under low-speed impact loading,” Shock and Vibration, vol. 2020, 2020, doi: 10.1155/2020/8812890.
52. Simulia, ABAQUS 6.14 User’s Manuals. Dassault Systèmes Simulia Corporation, 2016.
53. F. Kıpçak, B. Erdil, M. Tapan, and A. Karaşin, “The effect of voids on flexural capacity of reinforced concrete slabs,” Periodica Polytechnica Civil Engineering, vol. 67, no. 4, 2023, doi: 10.3311/PPci.21988.
54. F. Kıpçak, B. Erdil, and M. Tapan, “Experimental and numerical investigation of out-of-plane behavior of masonry brick walls with low-strength mortar: Effects of slenderness, shape and openings,” International Journal of Architectural Heritage, pp. 1–42, Dec. 2025, doi: 10.1080/15583058.2025.2584098.
55. Chinese Code GB 50010, Code for Design of Concrete Structures (Chinese Code GB 50010-2010). Beijing, China: National Standard of the People’s Republic of China, 2010.
56. G. Kaklauskas, V. Gribniak, P. L. Ng, E. Gudonis, and R. Jakubovskis, “Generalised tension-stiffening relationship conforming to Chinese Design Code GB 50010-2010,” in International Conference on Performance-Based and Life-Cycle Structural Engineering, pp. 630–639, Jan. 2015, doi: 10.14264/UQL.2016.1180.
57. X. Tang, B. He, B. Yang and J. Chen, “Experimental study on axial stress–strain behaviour of steel fibre-reinforced steel slag micropowder UHPC,” Applied Sciences, vol. 13, no. 15, Jul. 2023, doi: 10.3390/app13158807.
58. TS500, Betonarme Yapıların Tasarım ve Yapım Kuralları (Design and Construction Rules of Reinforced Concrete Structures). Ankara, Türkiye: Turkish Standards Institute (TSI), 2000.