Rize yöresi obsidyeninin çimentonun hidratasyon ısısına etkisi

Year 2019, - Cilt:8 - IMSMATEC Özel Sayı, 78 - 87, 15.12.2019

İlker Ustabaş

https://doi.org/10.17100/nevbiltek.632928

Cited By: 3

Abstract

Bu çalışmada, Rize yöresi obsidyeninin çimentonun hidratasyon ısısını
nasıl etkilediği araştırıldı. Çimentoda yaygın olarak kullanılan mineral
katkılardan uçucu kül ve yüksek fırın cürufunun çimentodaki hidratasyon ısısına
etkileri ile karşılaştırıldı. Obsidyen, uçucu kül ve yüksek fırın cüruflu
çimentoların basınç dayanımları ölçüldü.

Çalışma sonucunda Rize yöresi obsidyeninin çimentonun hidratasyon ısısını
düşürdüğü görüldü. Basınç dayanımı açısından çimentoda puzolan olarak
kullanılabileceği tespit edildi.

Keywords

Obsidyen., uçucu kül, yüksek fırın cürufu, hidratasyon ısısı

Supporting Institution

TÜBİTAK

Project Number

214M023

Thanks

Tübitak'a teşekkürler

The effect of the obsidian of the rize region on the hydrating heat of cement

Abstract

In this study, the effect of
obsidian of Rize region on the hydration heat of cement was investigated. It
was compared with the effects of fly ash and blast furnace slag on the
hydration heat in cement. The compressive strengths of obsidian, fly ash and
blast furnace slag cements were measured.

As a result of this study, the
obsidian of Rize decreases the hydration temperature of cement and does not
cause a negative effect in terms of compressive strength. Obsidian shows
similar effects with respect to fly ash and blast furnace slag in terms of heat
and compressive strength of hydration in cement..

Keywords

Obsidian, Fly ash

Project Number

214M023

References

• [1] Erdoğan, S.T., Sağlık, A.Ü. 2013. “Early-age activation of cement pastes and mortars containing ground perlite as a pozzolan”, Cement & Concrete Composites, 38, 29–39.
• [2] Mielenz RC, Greene KT, Schieltz NC. Natural pozzolans for concrete. Econ Geol 1951;46:311–28.
• [3] Scholer, A., Lothenbach, B., Winnefeld, F., Zajac, M., 2015. “Hydration of quaternary Portland cement blends containing blast-furnace slag, siliceous fly ash and limestone powder”, Cement & Concrete Composites, 55, 374–382.
• [4] Uzal B., Turanlı, L., Yücel, H., Göncüoğlu, M.C., Çulfaz, A. 2010. “Pozzolanic activity of clinoptilolite: A comparative study with silica fume, fly ash and a non-zeolitic natural pozzolan”, Cement and Concrete Research, 40, 398–404.
• [5] Caputo, D., Liguori, B., Colella, C. 2008. “Some advances in understanding the pozzolanic activity of zeolites: the effect of zeolite structure”, Cement & Concrete Composites, 30, 455–462.[6] Marjanović, M., Komljenović, Z., Baščarević, V., Nikolić, R., Petrović, N. 2015. “Physical–mechanical and microstructural properties of alkali-activated fly ash–blast furnaceslag blends”, Ceramics International, 41, 1421–1435.
• [7] İlker Ustabaş, Effect of mineral additive use on permeation properties of concrete and the relationship between permeation and carbonation, (2018) Turkish Journal of Materials, Turk. J. Mater. Vol: 3 No: 1 Page: 38-52 [8] İlker Ustabaş, Şakir Erdoğdu, Performance of mortars incorporating fly ash, silica fume, blast furnace slag at different temperature in magnesium sulfate solution, (2016), Turkish Journal of Materials, Turk. J. Mater. Vol: 1 No: 1 Page: 1-14
• [9] Baran, T., Pichniarczyk, P. 2017. “Correlation factor between heat of hydration and compressive strength of common cement”, Construction and Building Materials, 150, 321–332.
• [10] TS 13515, TS EN 206’nın uygulamasına yönelik tamamlayıcı standard, Türk standardı, 2014.
• [11] Ilker Ustabas, Ayberk Kaya, Comparing the pozzolanic activity properties of obsidian to those of fly ash and blast furnace slag, Construction and Building Materials 164 (2018) 297–307.
• [12] Han, F., He, X., Zhang, Z., Liu, J., 2017. “Hydration heat of slag or fly ash in the composite binder at different temperatures”, Thermochimica Acta, 655, 202–210.
• [13] TS EN 197-1, 2012, Çimento