Politeknik Dergisi 2147-9429 Gazi University 10.2339/politeknik.686358 Engineering Mühendislik Effect of the TiO2 Concentration On the Photocatalytic Self-Cleaning Properties Of Polyethylene Teraphthalate Fibers Polietilen Teraftalat (PET) Liflerde Katkılanan TiO2 Konsantrasyonunun Fotokatalitik Kendini Temizleme Özelliklerine Etkisi https://orcid.org/0000-0003-3363-5291 Batur Zeynep ULUDAĞ ÜNİVERSİTESİ, MÜHENDİSLİK FAKÜLTESİ https://orcid.org/0000-0002-8727-5829 Akyıldız Halil İbrahim Uludağ Üniversitesi Mühendislik Fakültesi 03 01 2021 24 1 121 129 02 07 2020 02 21 2020 Copyright © 1998, Journal of Polytechnic 1998 Journal of Polytechnic

In this article self-cleaning properties of polyethyleneterephthalate (PET) fibers is investigated as a function of TiO2 particle content added during fiber spinning. After fibers were spun they were woven and stained with black tea, coffee, cherry juice, and ketchup. The sample fabrics were then exposed to different light sources such as daylight and solar simulator to monitor the stain removal over time. Furthermore the mechanical properties of the fibers with various amounts of TiO2 content were compared. Morphologies of the fibers were investigated with both optical and scanning electron microscopes (SEM). Using the differential scanning calorimeter (DSC) the crystallization behavior of the samples was compared. In the range of studied concentrations of TiO2 it is observed that self-cleaning properties can be achieved without significantly sacrificing from the mechanical properties of the fibers.

Bu çalışmada eğirme esnasında katkılanan TiO2 miktarına bağlı olarak, polietilen tereftalat liflerde (PET) kendi kendini temizleme özelliği incelenmektedir. Lifler eğirildikten sonra dokunarak siyah çay, kahve, vişne suyu ve ketçap ile lekelenmiştir. Ardından numune kumaşlar gün ışığı ve Xenon lamba gibi farklı ışık koşullarına maruz bırakılarak lekelerin zamanla giderimi incelenmiştir. Ayrıca, üretilen katkılı liflerin mekanik performansı katkısız lifler ile kıyaslanmış ve morfolojileri, optik ve taramalı elektron mikroskopları (SEM) ile analiz edilmiştir. Diferansiyel taramalı kalorimetre (DSC) kullanılarak liflerin kristallenme davranışlarında farklılık olup olmadığı analiz edilmiştir. Yapılan çalışma neticesinde; liflerin mekanik özelliklerinde ve kristallenme davranışlarında çalışılan katkılama oranı aralığına göre, büyük değişimler olmadan fotokatalitik etki sayesinde kumaşa kendi kendini temizleme özelliği kazandırılabileceği tespit edilmiştir.

 polietilen teraftalat titanyum oksit kendini temizleme fotokataliz fiber polyethyleneterphthalate titania self cleaning fiber photocatalysis Korteks Mensucat Sanayi ve Ticaret A.Ş. [1] A. Fujishima and K. Honda, “Electrochemical photolysis of water at a semiconductor electrode,” Nature, vol. 238, no. 5358, pp. 37–38, 1972. [2] J.-M. Herrmann, “Heterogeneous photocatalysis: fundamentals and applications to the removal of various types of aqueous pollutants,” Catalysis today, vol. 53, no. 1, pp. 115–129, 1999. [3] A. L. Linsebigler, G. Lu, and J. T. Yates Jr, “Photocatalysis on TiO2 surfaces: principles, mechanisms, and selected results,” Chemical Reviews, vol. 95, no. 3, pp. 735–758, 1995. [4] N. Daneshvar, D. Salari, and A. R. Khataee, “Photocatalytic degradation of azo dye acid red 14 in water on ZnO as an alternative catalyst to TiO2,” Journal of photochemistry and photobiology A: chemistry, vol. 162, no. 2, pp. 317–322, 2004. [5] J. Liqiang et al., “Review of photoluminescence performance of nano-sized semiconductor materials and its relationships with photocatalytic activity,” Solar energy materials and solar cells, vol. 90, no. 12, pp. 1773–1787, 2006. [6] K. Hashimoto, H. Irie, and A. Fujishima, “TiO2 photocatalysis: a historical overview and future prospects,” Japanese journal of applied physics, vol. 44, no. 12R, p. 8269, 2005. [7] H. Kyung, J. Lee, and W. Choi, “Simultaneous and synergistic conversion of dyes and heavy metal ions in aqueous TiO2 suspensions under visible-light illumination,” Environmental science & technology, vol. 39, no. 7, pp. 2376–2382, 2005. [8] O. Akhavan, R. Azimirad, S. Safa, and M. M. Larijani, “Visible light photo-induced antibacterial activity of CNT–doped TiO2 thin films with various CNT contents,” Journal of Materials Chemistry, vol. 20, no. 35, pp. 7386–7392, 2010. [9] R. Asahi, T. Morikawa, T. Ohwaki, K. Aoki, and Y. Taga, “Visible-light photocatalysis in nitrogen-doped titanium oxides,” Science, vol. 293, no. 5528, pp. 269–271, 2001. [10] K. Huang, L. Chen, J. Xiong, and M. Liao, “Preparation and characterization of visible-light-activated Fe-N Co-doped TiO2 and its photocatalytic inactivation effect on leukemia tumors,” International Journal of Photoenergy, vol. 2012, 2012. [11] M. Yurddaşkal, U. Kartal, and E. C. Doluel, “Production of Titanium Dioxide/Reduced Graphene Oxide Composites and Investigation of Their Photocatalytic Properties,” Politeknik Dergisi, pp. 0–0, Dec. 2019, doi: 10.2339/politeknik.537900. [12] J. Kim, C. W. Lee, and W. Choi, “Platinized WO3 as an environmental photocatalyst that generates OH radicals under visible light,” Environmental science & technology, vol. 44, no. 17, pp. 6849–6854, 2010. [13] F. Wang, C. Di Valentin, and G. Pacchioni, “Rational band gap engineering of WO3 photocatalyst for visible light water splitting,” ChemCatChem, vol. 4, no. 4, pp. 476–478, 2012. [14] M. Mishra and D.-M. Chun, “α-Fe2O3 as a photocatalytic material: A review,” Applied Catalysis A: General, vol. 498, pp. 126–141, 2015. [15] A. Kleiman-Shwarsctein, Y.-S. Hu, A. J. Forman, G. D. Stucky, and E. W. McFarland, “Electrodeposition of α-Fe2O3 doped with Mo or Cr as photoanodes for photocatalytic water splitting,” The Journal of Physical Chemistry C, vol. 112, no. 40, pp. 15900–15907, 2008. [16] M. Alvarez et al., “2, 4-Dichlorophenoxyacetic acid (2, 4-D) photodegradation using an Mn+/ZrO2 photocatalyst: XPS, UV–vis, XRD characterization,” Applied Catalysis B: Environmental, vol. 73, no. 1–2, pp. 34–41, 2007. [17] F. Sayılkan, M. Asiltürk, N. Kiraz, E. Burunkaya, E. Arpaç, and H. Sayılkan, “Photocatalytic antibacterial performance of Sn 4+-doped TiO2 thin films on glass substrate,” Journal of Hazardous Materials, vol. 162, no. 2, pp. 1309–1316, 2009. [18] W. A. Daoud and J. H. Xin, “Low temperature sol-gel processed photocatalytic titania coating,” Journal of Sol-Gel Science and Technology, vol. 29, no. 1, pp. 25–29, 2004. [19] R. S. Sonawane, S. G. Hegde, and M. K. Dongare, “Preparation of titanium (IV) oxide thin film photocatalyst by sol–gel dip coating,” Materials chemistry and physics, vol. 77, no. 3, pp. 744–750, 2003. [20] C.-S. Lee, J. Kim, J. Y. Son, W. Choi, and H. Kim, “Photocatalytic functional coatings of TiO2 thin films on polymer substrate by plasma enhanced atomic layer deposition,” Applied Catalysis B: Environmental, vol. 91, no. 3, pp. 628–633, 2009. [21] K. Qi, J. H. Xin, W. A. Daoud, and C. L. Mak, “Functionalizing Polyester Fiber with a Self-Cleaning Property Using Anatase TiO2 and Low-Temperature Plasma Treatment,” International Journal of Applied Ceramic Technology, vol. 4, no. 6, pp. 554–563, 2007, doi: 10.1111/j.1744-7402.2007.02168.x. [22] L. Karimi, M. Mirjalili, M. E. Yazdanshenas, and A. Nazari, “Effect of nano TiO2 on self-cleaning property of cross-linking cotton fabric with succinic acid under UV irradiation,” Photochemistry and photobiology, vol. 86, no. 5, pp. 1030–1037, 2010. [23] Y. Xu, W. Wen, and J.-M. Wu, “Titania nanowires functionalized polyester fabrics with enhanced photocatalytic and antibacterial performances,” Journal of hazardous materials, vol. 343, pp. 285–297, 2018. [24] M. Radetić, “Functionalization of textile materials with TiO2 nanoparticles,” Journal of Photochemistry and Photobiology C: Photochemistry Reviews, vol. 16, pp. 62–76, 2013. [25] N. A. Ibrahim, R. Refaie, and A. F. Ahmed, “Novel approach for attaining cotton fabric with multi-functional properties,” Journal of Industrial Textiles, vol. 40, no. 1, pp. 65–83, 2010. [26] B. Xu, J. Ding, L. Feng, Y. Ding, F. Ge, and Z. Cai, “Self-cleaning cotton fabrics via combination of photocatalytic TiO2 and superhydrophobic SiO2,” Surface and Coatings Technology, vol. 262, pp. 70–76, 2015. [27] R. Wang, X. Wang, and J. H. Xin, “Advanced visible-light-driven self-cleaning cotton by Au/TiO2/SiO2 photocatalysts,” ACS Applied Materials & Interfaces, vol. 2, no. 1, pp. 82–85, 2009. [28] S. Z. D. Cheng, R. Pan, and B. Wunderlich, “Thermal analysis of poly(butylene terephthalate) for heat capacity, rigid-amorphous content, and transition behavior,” Die Makromolekulare Chemie, vol. 189, no. 10, pp. 2443–2458, 1988, doi: 10.1002/macp.1988.021891022. [29] Hideo Nakae, Ryuichi Inui, Yosuke Hirata, and Hiroyuki Saito, “Effects of surface roughness on wettability,” Acta Materialia, vol. 46, no. 7, pp. 2313–2318, Apr. 1998, doi: 10.1016/S1359-6454(98)80012-8. [30] M. K. Dufficy, M. T. Geiger, C. A. Bonino, and S. A. Khan, “Electrospun Ultrafine Fiber Composites Containing Fumed Silica: From Solution Rheology to Materials with Tunable Wetting,” Langmuir, vol. 31, no. 45, pp. 12455–12463, Nov. 2015, doi: 10.1021/acs.langmuir.5b03545. [31] N. A. Patankar, “Mimicking the Lotus Effect:  Influence of Double Roughness Structures and Slender Pillars,” Langmuir, vol. 20, no. 19, pp. 8209–8213, Sep. 2004, doi: 10.1021/la048629t. [32] F. Emami, S. Shekarriz, Z. Shariatinia, and Z. Moridi Mahdieh, “Self-cleaning Properties of Nylon 6 Fabrics Treated with Corona and TiO2 Nanoparticles under Both Ultraviolet and Daylight Irradiations,” Fibers Polym, vol. 19, no. 5, pp. 1014–1023, May 2018, doi: 10.1007/s12221-018-1025-4. [33] P. Pisitsak, A. Samootsoot, and N. Chokpanich, “Investigation of the self-cleaning properties of cotton fabrics finished with Nano-TiO2 and Nano-TiO2 mixed with fumed silica.,” Asia-Pacific Journal of Science and Technology, vol. 18, no. 2, pp. 200–211, 2013.