Özet: Bu çalışmada; 27Al, 54Fe, 58Ni ve 90Zr gibi füzyon reaktörü yapı malzemeleri için 10–30 MeV enerji aralığında oluşturulan (γ,p) reaksiyonlarının denge ve denge–öncesi nükleer reaksiyon modelleri kullanılarak, proton üretim tesir kesitleri incelenmiştir. Hesaplamalarda, Denge–öncesi hesaplamalar için; TALYS 1.6 İki Bileşenli Exciton Model ve EMPIRE 3.1 Exciton Model, denge hesaplamaları için ise; PCROSS Weisskopf–Ewing Model kullanılmıştır. Elde edilen sonuçlar, Deneysel Nükleer Reaksiyon Data (EXFOR) Kütüphanesi'nden alınan deneysel değerlerle karşılaştırılmıştır.
Anahtar kelimeler: Nükleer reaksiyon modelleri, füzyon reaktörleri, reaksiyon tesir–kesiti, EXFOR, denge ve denge–öncesi reaksiyonlar
(γ,p) Reaction Cross Section Calculations for 27Al, 54Fe, 58Ni and 90Zr Target Nuclei in the Energy Range of 10–30 MeV
Abstract: In this study, proton production cross-sections of (γ,p) reactions for several fusion reactor structural materials such as 27Al, 54Fe, 58Ni and 90Zr have been investigated in the incident photon energy range of 10–30 MeV using pre–equilibrium and equilibrium nuclear reaction models. TALYS 1.6 Two Component Exciton Model and EMPIRE 3.1 Exciton Model for the pre–equilibrium reactions and PCROSS Weisskopf–Ewing Model for the equilibrium reactions have been used. The calculated results have been compared with experimental data taken from the Experimental Nuclear Reaction Data (EXFOR) library.
Key words: Nuclear reaction models, fusion reactors, reaction cross–section, EXFOR, equilibrium and pre–equilibrium reactions
Nükleer reaksiyon modelleri füzyon reaktörleri reaksiyon tesir–kesiti EXFOR denge ve denge–öncesi reaksiyonlar
In this study, proton production cross-sections of (γ,p) reactions for several fusion reactor structural materials such as 27Al, 54Fe, 58Ni and 90Zr have been investigated in the incident photon energy range of 10–30 MeV using pre–equilibrium and equilibrium nuclear reaction models. TALYS 1.6 Two Component Exciton Model and EMPIRE 3.1 Exciton Model for the pre–equilibrium reactions and PCROSS Weisskopf–Ewing Model for the equilibrium reactions have been used. The calculated results have been compared with experimental data taken from the Experimental Nuclear Reaction Data (EXFOR) library
Nuclear reaction models fusion reactors reaction cross–section EXFOR equilibrium and pre–equilibrium reactions
Primary Language | Turkish |
---|---|
Subjects | Metrology, Applied and Industrial Physics |
Journal Section | Makaleler |
Authors | |
Publication Date | December 31, 2014 |
Published in Issue | Year 2014 Volume: 9 Issue: 2 |