Effect of Fuel Injection Parameters on Engine Performance in A Conventional Single Cylinder Spark Ignition Engine

Year 2024, Volume: 7 Issue: 2, 57 - 63, 31.12.2024

Recep Çağrı Orman

https://doi.org/10.70030/sjmakeu.1503849

Abstract

In this study, a 1D model was created using the Ricardo-Wave program for a single-cylinder, spark ignition, four-stroke, direct injection engine with a stroke volume of 398 cc. Air-fuel ratio (AFR), mixture temperature (MT), and start of injection (SOI) were used as fuel injection parameters. Using these parameters, 343 different cases were created. Brake power, thermal efficiency, and fuel consumption were used as engine performance parameters. By holding one injection parameter constant, a contour plot was created to examine the effect of the other two parameters on the engine performance parameter. According to the results, the effect of MT and SOI on brake power is 1%, the effect of AFR on brake power is 9.6%, the effect of MT and SOI on thermal efficiency is 1%, and the effect of AFR on thermal efficiency is 12.8%. The effect of MT and SOI on fuel consumption is 0.04%, the effect of AFR on fuel consumption is 22.9%, and the effect of AFR on brake specific fuel consumption is 22.9%. These results indicate that the most significant effect is provided by AFR, while MT and SOI also have a slight impact on engine performance.

Keywords

Internal combustion engine, Performance, Fuel injetion, Simulation

References

• Alagumalai, A. (2014). Internal combustion engines: Progress and prospects. Renewable and Sustainable Energy Reviews, 38, 561-571. https://doi.org/10.1016/j.rser.2014.06.014
• Reitz, R. D., Ogawa, H., Payri, R., Fansler, T., Kokjohn, S., Moriyoshi, Y., ... & Zhao, H. (2020). IJER editorial: The future of the internal combustion engine. International Journal of Engine Research, 21(1), 3-10. https://doi.org/10.1177/1468087419877990
• Taylor, A. M. (2008). Science review of internal combustion engines. Energy policy, 36(12), 4657-4667. https://doi.org/10.1016/j.enpol.2008.09.001
• Reitz, R. D. (2013). Directions in internal combustion engine research. Combustion and Flame, 160(1), 1-8. https://doi.org/10.1016/j.combustflame.2012.11.002
• Kalghatgi, G. T. (2015). Developments in internal combustion engines and implications for combustion science and future transport fuels. Proceedings of the combustion institute, 35(1), 101-115. https://doi.org/10.1016/j.proci.2014.10.002
• Cordon, D., Dean, C., Steciak, J., & Beyerlein, S. (2007). One-dimensional engine modeling and validation using Ricardo WAVE. Final Report, University of Idaho.
• Yontar, A. A., & Doğu, Y. (2018). Experimental and numerical investigation of effects of CNG and gasoline fuels on engine performance and emissions in a dual sequential spark ignition engine. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 40(18), 2176-2192. https://doi.org/10.1080/15567036.2018.1495783
• Claywell, M., Horkheimer, D., & Stockburger, G. (2006). Investigation of intake concepts for a formula SAE four-cylinder engine using 1D/3D (Ricardo WAVE-VECTIS) coupled modeling techniques (No. 2006-01-3652). SAE Technical Paper. https://doi.org/10.4271/2006-01-3652
• Deighan, T., & Zuhdi, N. (2007). Crankcase flow modeling for a racing motorcycle engine (No. 2007-01-0266). SAE Technical Paper. https://doi.org/10.4271/2007-01-0266
• Youssef, A., & Ibrahim, A. (2024). A numerical investigation on enhancing the performance of a diesel engine fuelled with diesel‐biodiesel blend using a diethyl ether as an additive. Engineering Reports, e12915. https://doi.org/10.1002/eng2.12915