Determination of fin pitches for maximum performance index of L-footed spiral fin-and-tube heat exchangers

Year 2015, Volume: 1 Issue: 5 - SPECIAL ISSUE 1 INTERNATIONAL ENERGY TECHNOLOGIES ENTECH14, 251 - 262, 01.05.2015

Somchai Wongwises Parinya Pongsoi

https://doi.org/10.18186/jte.07384

Cited By: 2

Abstract

In this study, the fin pitches of L-footed spiral finned tube heat exchangers were determined for maximimum performance index. The experiments were done at various fin pitches (fp = 2.4, 3.2, and 4.2 mm) under the range of high Reynolds numbers (5,000–15,000). The test sections had a parallel and counter cross-flow arrangement having the number of tube row of 2. The two working fluids were the ambient air and hot water. The performance indexes (ζ1, ζ2, and ζ3) were used to analyze the experimental data at different fin pitches. The results show that the optimal fin pitches for L-footed spiral finned tube heat exchangers are 2.4 and 3.2 mm

Keywords

fin, tube, heat transfer, heat exchanger, optimum, air-water

Determination of fin pitches for maximum performance index of L-footed spiral fin-and-tube heat exchangers

Abstract

Keywords

-

References

• S.B. Genic, B.M. Jacimovic, B.R. Latinovic, Research on air pressure drop in helically-finned tube heat exchangers, Applied Thermal Engineering 26 (5-6) (2006) 478-485.
• H. Hamakawa, K. Nakashima, T. Kudo, E. Nishida, T. Fukano, Vortex Shedding from a Circular Cylinder with Spiral Fin, Journal of Fluid Science and Technology 3 (6) (2008) 787- 795.
• M. Lee, T. Kang, Y. Kim, Air-side heat transfer characteristics of spiral-type circular fin-and tube heat exchangers, International Journal of Refrigeration 33 (2) (2010) 313-320.
• M. Lee, T. Kang, Y. Joo, Y. Kim, Heat transfer characteristics of spirally-coiled circular fin-tube heat exchangers operating under frosting conditions, International Journal of Refrigeration 34 (1) (2011) 328-336.
• P. Pongsoi, S. Pikulkajorn, S. Wongwises, Experimental study on the air-side performance of a Multipass parallel and counter cross-flow L-footed spiral fin-and-tube heat exchanger, Heat Transfer Engineering 33 (15) (2012) 1251-1263.
• P. Pongsoi, P. Promoppatum, S. Pikulkajorn, S. Wongwises, Effect of fin pitches on the air-side performance of L-footed spiral fin-and-tube heat exchangers, Int. Journal of Heat and Mass Transfer 59 (2013) 75-82.
• C.W. Lu, J.M. Huang, W.C. Nien, C.C. Wang, A numerical investigation of the geometric effects on the performance of plate finned-tube
• Management 52 (3) (2011) 1638-1643.
• R. Romero-Mendez, M. Sen, K.T. Yang, R. McClain, Effect of fin spacing on convection in a plate fin and tube heat exchanger, International Journal of Heat and Mass Transfer 43 (1)(2000) 39-51.
• T. Sencic, A. TRP, K. Lenic, Parametric study of operating and geometry characteristics effect on heat transfer in annular finned tube heat exchanger, Engineering Review 29 (1) (2009) 25-36.
• M. Lee, T. Kang, Y. Kim, Air-side heat transfer characteristics of spiral-type circular fin- and-tube heat exchangers, International Journal of Refrigeration 33 (2) (2010) 313-320. Energy Conversion
• and ANSI/ASHRAE Standard 33-2000, Method of Testing Forced Circulation Air Cooling and Air Heating Coils (2000).
• P. Pongsoi, S. Pikulkajorn, C.C. Wang, S. Wongwises, Effect of number of tube rows on the air side performance of crimped spiral fin-and-tube heat exchangers with a multipass parallel and counter cross-flow configuration, Int. Journal of Heat and Mass Transfer 55 (4) (2012) 1403-1411.
• C.C. Wang, C.T. Chang, Heat and mass transfer for plate fin-and-tube heat exchangers with and without hydrophilic coating, Int. J. Heat Mass Transfer 41 (1998) 3109-3120.
• C.C. Wang, Y.J. Chang, Y.C. Hsieh, Y.T. Lin, Sensible heat and friction characteristics of plate fin- and-tube heat exchangers having plane fins, Int. Journal of Refrigeration 19(4) (1996) 223- 230.
• R.L. Webb, Principles of Enhanced Heat Transfer, Wiley, New York (1994).