NUMERICAL INESTIGATION OF ISOTHERMAL FLOW AROUND IMPINGEMENT PLATES IN A SHELL AND TUBE EXCHANGER

Year 2017, Volume: 3 Issue: 5, 1442 - 1452, 19.09.2017

Ram Subash Maurya

https://doi.org/10.18186/journal-of-thermal-engineering.338901

Cited By: 3

Abstract

The impingement plate is an important protecting device of tube bank
which is located on shell side at the nozzle inlet of shell and tube heat
exchanger. Current work presents a 2D numerical investigation of the flow
structure developing around different impingement plate design under different
flow conditions using ANSYS Fluent. Location, size and arrangement of
impingement plate are the investigated parameters which provides significant
information for the selection of ideal location and size of required
impingement plate.  Study compares different
plate geometry and concludes the best one which apart from protecting the tube
banks, also removes the stagnation zone developing behind them because of their
placements.

Keywords

Impingement Plate, Heat Exchanger, Flow Distribution, TEMA, CFD, Numerical, Simulation

References

• [1] Tu, C.V. and D.H. Wood, Wall pressure and shear stress measurements beneath an impinging jet, Experimental Thermal and Fluid Science, 1996. 13: p. 364-373.
• [2] Shi, Y.L., M.B. Ray and A.S. Mujumdar, Computational study of impingement heat transfer under a turbulence slot jet, Industrial and Engineering Chemistry Research, 2002, 41: p. 4643-4651.
• [3] De Langhe, B. Merci, and E. Dick, Application of RG hybrid RANS/LES model to swirling confined turbulent jets, Journal of Turbulence, 2006. 7(56): p. 1-19.
• [4] Perrotin, T. and D. Clodic, Thermal-hydraulic CFD study in louvered fin and flat tube heat exchangers, International Journal of Refrigeration, 2004. 27(4): p. 422-432.
• [5] Ozden, E. and I. Tari, Shell side CFD analysis of a small shell and tube heat exchanger, Energy Conversion and Management, 2010. 51(5): p. 1004-1014.
• [6] Badra, J. A.R. Masri, and M. Behnia, Enhanced heat transfer from arrays of jets impinging on a moving plates, Heat Transfer Engineering, 2013, 34(4): p. 361-371.
• [7] Karlsson T. and L. Vamling, Flow fields in shell and tube condensers: comparison of a pure refrigerant and a binary mixture, International Journal of Refrigeration, 2005. 28(5): p. 706-713.
• [8] Al-Anizi, S.S. and A.M. Al-Otaibi, Double perforated impingement plate in shell and tube heat exchanger, 7th International Conference on Heat Exchanger Fouling and Cleaning- Challenges and Opportunities. 2007. Tomar, Portugal.
• [9] Kandu B, Semi analytical methods for heat and fluid flow between two parallel plates, Journal of Thermal Engineering, 2015, 1(3): p. 175-181.