Insight of boundary layer structure with heat transfer through a diverging porous channel in Darcy-Forchheimer porous material with suction/injection: A study of separation control

Year 2023, Volume: 9 Issue: 6, 1419 - 1427, 30.11.2023

Astick Banerjee Sanat Kumar Mahato Krishnendu Bhattacharyya Sohita Rajput Ajeet Kumar Verma Ali J. Chamkha

https://doi.org/10.18186/thermal.1395400

Abstract

Separation control and formation of boundary layer Newtonian flow in a diverging perme-able channel in Darcy-Forchheimer porous material having suction/injection are discussed. Self-similar equations from governing equations are acquired and existence conditions for boundary layer structure are derived using nature of velocity gradient inside boundary layer. It reveals that if sum of Darcy permeability parameter and twice of Forchheimer parameter exceeds 2, then the boundary layer flow always exists with all type of mass suction/injection and even without suction/injection. Also, if mass suction parameter goes beyond 22, then there is no matter what are the values of Darcy permeability parameter and Forchheimer pa-rameter, a boundary layer exists inside the divergent channel. In addition, obtained numerical solutions are exhibited graphically. It reveals that thicknesses of velocity and thermal bound-ary layers reduce with Darcy and non-Darcy resistances of porous medium and fluid tempera-ture also diminishes. The velocity and temperature reduce with increment of mass suction and contrary results are found for mass injection.

Keywords

Divergent Channel, Boundary Layer Flow, Separation Control, Non-Darcy Porous Material, Suction/Injection

References

• REFERENCES
• [1] Jeffery GB. L. The two-dimensional steady motion of a viscous fluid. Lond Edinb Dublin Philos Mag J Sci 1915;29:455–465. [CrossRef]
• [2] Hamal G. Spiralförmige Bewegungen zäher Flüssigkeiten. Jahresber Dtsch Math-Verein [Article in German] 1917;25:34–60.
• [3] Dean WR. LXXII. Note on the divergent flow of fluid. Lond Edinb Dublin Philos Mag J Sci 1934;18:759–777. [CrossRef]
• [4] Rosenhead L. The steady two-dimensional radial flow of viscous fluid between two inclined plane walls. Proc R Soc Lond A 1940;175:436–467. [CrossRef]
• [5] Wang JW, Price GM. Laminar flow development and heat transfer in converging plane-walled channels. Appl Sci Res 1972;25:361–371. [CrossRef]
• [6] James DF, Saringer JH. Flow of dilute polymer solutions through converging channels. J Non-Newton Fluid Mech 1982;11:317–339. [CrossRef]
• [7] Barış S. Flow of a second-grade visco-elastic fluid in a porous converging channel. Turkish J Eng Env Sci 2003;27:73–81.
• [8] Magyari E. Backward boundary layer heat transfer in a converging channel. Fluid Dyn Res 2007;39:493–504. [CrossRef]
• [9] Maranzoni A, Pilotti M, Tomirotti M. Experimental and numerical analysis of side weir flows in a converging channel. J Hydraulic Eng 2017;143:04017009. [CrossRef]
• [10] Holstein H. Ähnliche laminare Reibungsschichten an durchlässigen Wändern. ZWB-VM 1943.
• [11] Gersten K, Körner H. Wärmeübergang unter Berücksichtigung der Reibungswärme bei laminaren Keilströmungen mit veränderlicher Temperatur und Normalgeschwindigkeit entlang der Wand. Int J Heat Mass Transf [Article in German] 1968;11:655–673. [CrossRef]
• [12] Eagles PM. The stability of a family of Jeffery-Hamel solutions for divergent channel flow. J Fluid Mech 1966;24:191–207. [CrossRef]
• [13] Kamel MT. Flow of a micropolar fluid in a diverging channel. Int J Eng Sci 1987;25:759–768. [CrossRef]
• [14] Drazin PG. Flow through a diverging channel: instability and bifurcation. Fluid Dyn Res 1999;24:321–327. [CrossRef]
• [15] Sadeghy K, Khabazi N, Taghavi SM. Magnetohydrodynamic (MHD) flows of viscoelastic fluids in converging/diverging channels. Int J Eng Sci 2007;45:923–938. [CrossRef]
• [16] Esmaeilpour M, Ganji DD. Solution of the Jeffery–Hamel flow problem by optimal homotopy asymptotic method. Comput Math Appl 2010;59:3405–3411. [CrossRef]
• [17] Bhattacharyya K, Layek GC. MHD boundary layer flow of dilatant fluid in a divergent channel with suction or blowing. Chin Phys Lett 2011;28:084705. [CrossRef]
• [18] Sheikholeslami M, Ganji DD, Ashorynejad HR, Rokni HB. Analytical investigation of Jeffery-Hamel flow with high magnetic field and nanoparticle by Adomian decomposition method. Appl Math Mech 2012;33:25–36. [CrossRef]
• [19] Layek GC, Kryzhevich SG, Gupta AS, Reza M. Steady magnetohydrodynamic flow in a diverging channel with suction or blowing. Z Angew Math Phys 2013;64:123–143. [CrossRef]
• [20] Gerdroodbary MB, Takami MR, Ganji DD. Investigation of thermal radiation on traditional Jeffery–Hamel flow to stretchable convergent/divergent channels. Case Stud Ther Eng 2015;6:28–39. [CrossRef]
• [21] Gepner SW, Floryan JM. Flow dynamics and enhanced mixing in a converging–diverging channel. J Fluid Mech 2016;807:167–204. [CrossRef]
• [22] Khan U, Adnan, Ahmed N, Mohyud-Din ST. Soret and Dufour effects on Jeffery-Hamel flow of second-grade fluid between convergent/divergent channel with stretchable walls. Results Phys 2017;7:361–372. [CrossRef]
• [23] Akinshilo AT, Ilegbusi A, Ali HM, Surajo A-J. Heat transfer analysis of nanofluid flow with porous medium through Jeffery Hamel diverging/converging channel. J Appl Comput Mech 2020;6:433–444.
• [24] Liu P, Ho JY, Wong TN, Toh KC. Laminar film condensation inside and outside vertical diverging/converging small channels: A theoretical study. Int J Heat Mass Transf 2020;149:119193. [CrossRef]
• [25] Hoseinzadeh S, Moafi A, Shirkhani A, Chamkha AJ. Numerical validation heat transfer of rectangular cross-section porous fins. J Thermophy Heat Transf 2019;33:698–704. [CrossRef]
• [26] Hoseinzadeh S, Heyns PS, Chamkha AJ, Shirkhani A. Thermal analysis of porous fins enclosure with the comparison of analytical and numerical methods. J Therm Anal Calorim 2019;138:727–735. [CrossRef]
• [27] Hoseinzadeh S, Sohani A, Ashrafi TG. An artificial intelligence‑based prediction way to describe flowing a Newtonian liquid/gas on a permeable flat surface. J Therm Anal Calorim 2022;147:4403–4409. [CrossRef]
• [28] Hoseinzadeh S, Sohani A, Shahverdian MH, Shirkhani A, Heyns S. Acquiring an analytical solution and performing a comparative sensitivity analysis for flowing Maxwell upper-convected fluid on a horizontal surface. Therm Sci Eng Prog 2021;23:100901. [CrossRef]
• [29] Ashrafi TG, Hoseinzadeh S, Sohani A, Shahverdian MH. Applying homotopy perturbation method to provide an analytical solution for Newtonian fluid flow on a porous flat plate. Math Meth Appl Sci 2021;44:7017–7030. [CrossRef]
• [30] Ahmadi N, Rezazadeh S, Dadvand A, Mirzaee I. Numerical investigation of the effect of gas diffusion layer with semicircular prominences on polymer exchange membrane fuel cell performance and species distribution. J Renew Energy Envior 2015;2:36–46. [CrossRef]
• [31] Xu J, Qin H, Li H, Lei Z. Numerical simulation for hydrocarbon production analysis considering Pre-Darcy flow in fractured porous media. Eng Analy Bound Elem 2022;134:360–376. [CrossRef]
• [32] Jabbary A, Arnesa SR, Samanipour H, Ahmadi N. Numerical investigation of 3D rhombus designed PEMFC on the cell performance. Int J Green Energy 2021;18:425–442. [CrossRef]
• [33] Hoseinzadeh S, Ghasemiasl R, Havaei D, Chamkha AJ. Numerical investigation of rectangular thermal energy storage units with multiple phase change materials. J Mol Liq 2018;271:655–660. [CrossRef]
• [34] Ghasemia MH, Hoseinzadeh S, Memon S. A dual-phase-lag (DPL) transient non-Fourier heat transfer analysis of functional graded cylindrical material under axial heat flux. Int Commun Heat Mass Transf 2022;131:105858. [CrossRef]
• [35] Mahmoud MAA, Mahmoud MA-E, Waheed SE. Hydromagnetic boundary layer micropolar fluid flow over a stretching surface embedded in a non-Darcian porous medium with radiation. Math Prob Eng 2006;2006:39392. [CrossRef]
• [36] Hatami M, Mosayebidorcheh S, Vatani M, Mosayebidorcheh T, Ganji DD. Differential transformation method for analysis of nonlinear flow and mass transfer through a channel filled with a porous medium. J Ther Eng 2020;6:24–40. [CrossRef]
• [37] Paul A, Nath JM, Das TK. An investigation of the MHD Cu-Al2O3/H2O hybrid-nanofluid in a porous medium across a vertically stretching cylinder incorporating thermal stratification impact. J Ther Eng 2023;9:799–810. [CrossRef] [38] Ebrahimi A, Roohi E. Flow and thermal fields investigation in divergent micro/nano channels. J Ther Eng 2016;2:709–714. [CrossRef]
• [39] Xuyi Z, Fuqiang W, Xuhang S, Ziming C, Xiangtao G. Analysis of heat transfer performance of the absorber tube with convergent- divergent structure for parabolic trough collector. J Ther Eng 2021;7:1843–1856. [CrossRef]
• [40] Verma AK, Bhattacharyya K, Rajput S, Mandal MS, Chamkha AJ, Yadav D. Buoyancy driven non-Newtonian Prandtl-Eyring nanofluid flow in Darcy-Forchheimer porous medium over inclined non-linear expanding sheet with double stratification. Waves Random Complex Media 2022. [CrossRef]
• [41] Verma AK, Rajput S, Bhattacharyya K, Chamkha AJ. Nanoparticle’s radius effect on unsteady mixed convective copper-water nanofluid flow over an expanding sheet in porous medium with boundary slip. Chem Eng J Adv 2022;12:100366. [CrossRef]