BibTex RIS Cite

INVESTIGATION OF THE EFFECTS OF CONVENTIONAL AND WIPER COATED CARBIDE TOOLS WITH DRY CUTTING ON CUTTING FORCES, SURFACE ROUGHNESS, AND MATERIAL HARDNEES IN TURNING 17-4 PH STAINLESS STEEL

Year 2016, Volume: 6 Issue: 1, 33 - 39, 23.07.2016

Mustafa Ay Gültekin Basmacı

Abstract

In this study, an experimental investigation on cutting forces, surface roughness and the hardness of material after machining in turning of 17-4 PH stainless steel using wiper and conventional insert cutting tools with dry cutting condition werepresented. The influences of feed rate, depth of cut, and corner radius on surface roughness, cutting force and material hardnesswere examined. In order to optimize the turning process, Taguchi optimization method has been used. The influence of each parameter on obtained results was determined by using analysis of variance(ANOVA). The relationship between dependent parameters and independent parameters were modeled by Regression analysis. The optimal machinability of 17-4PH stainless steel with coated carbide insert was successfully determined in this study

Keywords

Anova Taguchi method wiper and conventional tools Surface roughness cutting force Hardness

Year 2016, Volume: 6 Issue: 1, 33 - 39, 23.07.2016

Mustafa Ay Gültekin Basmacı

Abstract

There are 0 citations in total.

Details

Other ID JA56CJ36BM
Journal Section Articles
Authors

Mustafa Ay This is me

Gültekin Basmacı This is me

Publication Date July 23, 2016
Published in Issue Year 2016 Volume: 6 Issue: 1

Cite

APA Ay, M., & Basmacı, G. (2016). INVESTIGATION OF THE EFFECTS OF CONVENTIONAL AND WIPER COATED CARBIDE TOOLS WITH DRY CUTTING ON CUTTING FORCES, SURFACE ROUGHNESS, AND MATERIAL HARDNEES IN TURNING 17-4 PH STAINLESS STEEL. TOJSAT, 6(1), 33-39.
AMA Ay M, Basmacı G. INVESTIGATION OF THE EFFECTS OF CONVENTIONAL AND WIPER COATED CARBIDE TOOLS WITH DRY CUTTING ON CUTTING FORCES, SURFACE ROUGHNESS, AND MATERIAL HARDNEES IN TURNING 17-4 PH STAINLESS STEEL. TOJSAT. July 2016;6(1):33-39.
Chicago Ay, Mustafa, and Gültekin Basmacı. “INVESTIGATION OF THE EFFECTS OF CONVENTIONAL AND WIPER COATED CARBIDE TOOLS WITH DRY CUTTING ON CUTTING FORCES, SURFACE ROUGHNESS, AND MATERIAL HARDNEES IN TURNING 17-4 PH STAINLESS STEEL”. TOJSAT 6, no. 1 (July 2016): 33-39.
EndNote Ay M, Basmacı G (July 1, 2016) INVESTIGATION OF THE EFFECTS OF CONVENTIONAL AND WIPER COATED CARBIDE TOOLS WITH DRY CUTTING ON CUTTING FORCES, SURFACE ROUGHNESS, AND MATERIAL HARDNEES IN TURNING 17-4 PH STAINLESS STEEL. TOJSAT 6 1 33–39.
IEEE M. Ay and G. Basmacı, “INVESTIGATION OF THE EFFECTS OF CONVENTIONAL AND WIPER COATED CARBIDE TOOLS WITH DRY CUTTING ON CUTTING FORCES, SURFACE ROUGHNESS, AND MATERIAL HARDNEES IN TURNING 17-4 PH STAINLESS STEEL”, TOJSAT, vol. 6, no. 1, pp. 33–39, 2016.
ISNAD Ay, Mustafa - Basmacı, Gültekin. “INVESTIGATION OF THE EFFECTS OF CONVENTIONAL AND WIPER COATED CARBIDE TOOLS WITH DRY CUTTING ON CUTTING FORCES, SURFACE ROUGHNESS, AND MATERIAL HARDNEES IN TURNING 17-4 PH STAINLESS STEEL”. TOJSAT 6/1 (July 2016), 33-39.
JAMA Ay M, Basmacı G. INVESTIGATION OF THE EFFECTS OF CONVENTIONAL AND WIPER COATED CARBIDE TOOLS WITH DRY CUTTING ON CUTTING FORCES, SURFACE ROUGHNESS, AND MATERIAL HARDNEES IN TURNING 17-4 PH STAINLESS STEEL. TOJSAT. 2016;6:33–39.
MLA Ay, Mustafa and Gültekin Basmacı. “INVESTIGATION OF THE EFFECTS OF CONVENTIONAL AND WIPER COATED CARBIDE TOOLS WITH DRY CUTTING ON CUTTING FORCES, SURFACE ROUGHNESS, AND MATERIAL HARDNEES IN TURNING 17-4 PH STAINLESS STEEL”. TOJSAT, vol. 6, no. 1, 2016, pp. 33-39.
Vancouver Ay M, Basmacı G. INVESTIGATION OF THE EFFECTS OF CONVENTIONAL AND WIPER COATED CARBIDE TOOLS WITH DRY CUTTING ON CUTTING FORCES, SURFACE ROUGHNESS, AND MATERIAL HARDNEES IN TURNING 17-4 PH STAINLESS STEEL. TOJSAT. 2016;6(1):33-9.