tuje Turkish Journal of Engineering 2587-1366 Murat YAKAR 10.31127/tuje.1744507 Construction Materials Yapı Malzemeleri Experimental Investigation on Flexural Performance of RC Beams with 50% & 100% Recycled Concrete Aggregates https://orcid.org/0000-0003-2146-910X Masne Nilesh GES R H Sapat College of Engineering Management Studies and Research Nashik https://orcid.org/0000-0003-4902-2182 Pawar Akshay SVKM’s College of Engineering, Shirpur (MS), 425405, India https://orcid.org/0009-0001-9503-4291 Sonar Lokesh SVKM’s College of Engineering, Shirpur (MS), 425405, India 05 01 2026 10 2 328 335 07 17 2025 02 17 2026 Copyright © 2017, Turkish Journal of Engineering 2017 Turkish Journal of Engineering

Flexural tests were conducted on reinforced normal-strength concrete beam specimens to encourage the utilisation of recycled concrete aggregates (RCA). Moreover, companion cylinder samples also tested to evaluate the tensile and compressive strength of recycled and natural aggregate concrete (NAC) used in beam specimens. The replacement ratio was taken as 0%, 50% and 100%. The size of all beam specimens was 2100 mm long, 125 mm wide, and 250 mm deep. The four-point loading was applied to the beam specimens, and the region of constant moment was taken as 600 mm, which is equal to one-third of the effective span of the beam specimens. The primary goals of this investigation were to assess the flexural performance and to evaluate the prospective use of RCA in concrete structures, and to substantiate the suitability of the current design code provisions for flexural beams. The reduction in the ultimate moment of the beam was approximately 8.75% at a 50% replacement level and 13.75% at 100% replacement level compared to the counterpart with 0% replacement of RCA. The study outcome showed no significant difference in cracking and ultimate strength between beam specimens with and without RCA.

 Flexural strength Recycled concrete aggregate Load deflection curve Ductility ratio Flexural stiffness 01 Pawar, A. J., & Suryawanshi, S. R. (2022). Comprehensive Analysis of Stress-strain Relationships for Recycled Aggregate Concrete. International Journal of Engineering, 35 (11), 2102–2110. https://doi.org/10.5829/ije.2022.35.11b.05 Yasin Mousavi, S., Tavakkoli, A., Jahanshahi, M., & Dankoub, A. (2020). Performance of High-strength Concrete Made with Recycled Ceramic Aggregates (Research Note). International Journal of Engineering, 33 (6), 1085–1093. https://doi.org/10.5829/ije.2020.33.06c.05 Masne, N., & Suryawanshi, S. (2022). Analytical and Experimental Investigation of Recycled Aggregate Concrete Beams Subjected to Pure Torsion. International Journal of Engineering, 35(10), 1959-1966. https://doi.org/10.5829/ije.2022.35.10A.14 Abdo, A., ElZohairy, A., Alashker, Y., Badran, M. A. E.-A., & Ahmed, S. (2024). Effect of Treated/Untreated Recycled Aggregate Concrete: Structural Behavior of RC Beams. Sustainability. https://doi.org/10.3390/su16104039 Taha, A., Alnuaimi, H., & Alnuaimi, N., (2025). Flexural performance of recycled aggregate concrete beams reinforced with basalt fiber-reinforced polymer or steel bars. Innov. Infrastruct. Solut. 10, 218. https://doi.org/10.1007/s41062-025-02013-x Ignjatović, I. S., Marinković, S. B., Mišković, Z. M., & Savić, A. R. (2013). Flexural behavior of reinforced recycled aggregate concrete beams under short-term loading. Materials and Structures, 46(6), 1045–1059. https://doi.org/10.1617/s11527-012-9952-9 Arezoumandi, M., Smith, A., Volz, J. S., & Khayat, K. H. (2015) An experimental study on flexural strength of reinforced concrete beams with 100 % recycled concrete aggregate. Engineering Structures, 88, 154–162. https://doi.org/10.1016/j.engstruct.2015.01.043 Seara-Paz, S., González-Fonteboa, B., Martínez-Abella, F., & Eiras-López, J. (2018). Flexural performance of reinforced concrete beams made with recycled concrete coarse aggregate. Engineering Structures, 156, 32–45. https://doi.org/10.1016/j.engstruct.2017.11.015 Choi, W., & Yun, H. (2013). Long-term deflection and flexural behavior of reinforced concrete beams with recycled aggregate. Journal of Materials & Design, 51, 742–750. https://doi.org/10.1016/j.matdes.2013.04.044 Choi, W. C., Yun, H. Do, & Kim, S. W. (2012). Flexural performance of reinforced recycled aggregate concrete beams. Magazine of Concrete Research, 64(9), 837–848. https://doi.org/10.1680/macr.11.00018 Sunayana, S., & Barai, S. V. (2018). Flexural performance and tension-stiffening evaluation of reinforced concrete beam incorporating recycled aggregate and fly ash. Construction and Building Materials, 174, 210–223. https://doi.org/10.1016/j.conbuildmat.2018.04.072 Ajdukiewicz, A. B., & Kliszczewicz, A. T. (2007). Comparative Tests of Beams and Columns Made of Recycled Aggregate Concrete and Natural Aggregate Concrete. Journal of Advanced Concrete Technology, 5(2), 259–273. https://doi.org/10.3151/jact.5.259 Kang, T. H. K., Kim, W., Kwak, Y. K., & Hong, S. G. Flexural testing of reinforced concrete beams with recycled concrete aggregates. ACI Structural Journal, Vol. 111, No. 3, (2014), 607–616. https://doi.org/10.14359/51686622 Nandhini, K. U., Jayakumar, S., & Kothandaraman, S. (2016). Flexural strength properties of recycled aggregate concrete. International Journal of Applied Innovation and Engineering Management, 5(5), 6–11. Pradhan, S., Kumar, S., & Barai, S. V. (2018). Performance of reinforced recycled aggregate concrete beams in flexure : experimental and critical comparative analysis. Materials and Structures, 51 (3), 1–17. https://doi.org/10.1617/s11527-018-1185-0 Sato, R., Maruyama, I., Sogabe, T., & Sogo, M. (2007). Flexural behavior of reinforced recycled concrete beams. Journal of Advanced Concrete Technology, 5(1), 43–61. https://doi.org/10.3151/jact.5.43 Knaack, A. M., Kurama, Y. C., & Asce, M. (2015). Behavior of Reinforced Concrete Beams with Recycled Concrete Coarse Aggregates,141(3). https://doi.org/10.1061/(ASCE)ST.1943-541X.0001118 Hemida, O. A. R., Abdalla, H., & Fouad, H. (2023). Flexural behaviour of recycled reinforced concrete beams strengthened/ repaired with CFRP laminates. Journal of Engineering and Applied Sciences. https://doi.org/10.1186/s44147-023-00235-3 Bai, W. & Sun, B. Experimental study on flexural behavior of recycled coarse aggregate concrete beam. In Applied Mechanics and Materials, 29-32, 543–548. https://doi.org/10.4028/www.scientific.net/AMM.29-32.543 Sagheer, A. M., Tabsh, S., & Yehia, S. (2023). The Structural Behavior of Reinforced Concrete Beams Made with Locally Produced Recycled Aggregate in the UAE. Buildings. https://doi.org/10.3390/buildings13102597 Deresa, S., Xu, J., Demartino, C., Heo, Y., Li, Z., & Xiao, Y. (2020). A review of experimental results on structural performance of reinforced recycled aggregate concrete beams and columns. None. https://doi.org/10.1177/1369433220934564 Hamad, B. S., Dawi, A. H., Daou, A., & Chehab, G. R. (2018). Studies of the effect of recycled aggregates on flexural, shear, and bond splitting beam structural behavior. Case Studies in Construction Materials, 9. https://doi.org/10.1016/j.cscm.2018.e00186 Chaboki, H. R., Ghalehnovi, M., Karimipour, A., & de Brito, J. (2018). Experimental study on the flexural behaviour and ductility ratio of steel fibres coarse recycled aggregate concrete beams. Construction and Building Materials, 186, 400–422. https://doi.org/10.1016/j.conbuildmat.2018.07.132 Fathifazl, G., Razaqpur, A. G., Isgor, O. B., Abbas, A., Fournier, B., & Foo, S. (2009). Flexural performance of steel-reinforced recycled concrete beams. ACI Structural Journal, 106(6), 858–867. https://doi.org/10.14359/51663187 Kosior-Kazberuk, M., & Grzywa, M. (2014). Recycled Aggregate Concrete as Material for Reinforced Concrete Structures. Journal of Sustainable Architecture and Civil Engineering, 7(2). https://doi.org/10.5755/j01.sace.7.2.7135 Öztürk, O., & Türköz, M. (2022). Effect of silica fume on the undrained strength parameters of dispersive soils. Turkish Journal of Engineering, 6(4), 293-299. https://doi.org/10.31127/tuje.1001413 Saraçoğlu, M. H., & Özkaya, A. (2023). Investigation of acceleration on non-structural building elements under earthquake effect. Turkish Journal of Engineering, 7(1), 56-63. https://doi.org/10.31127/tuje.1021866 Kasai, Y., (1974). Durability of Concrete Using Recycled Coarse Aggregate, RILEM; Reuse of Demolition Waste. 2, Chapman and Hall, 623-632. Yagishita, F., Sano, M., & Yamada, M. (1994). Behaviour of Reinforced Concrete Beams Containing Recycled Coarse Aggregate. Proceedings of the 3rd International RILEM Symposium, 331-342. Maruyama, I., Sogo, M., Sogabe, T., Sato, R., & Kawai, K. (2004). Flexural Properties of Reinforced Recycled Concrete Beams. Proceedings of International RILEM Conference on the Use of Recycled Materials in Buildings and Structures, 1, 525-535. Mukai, T. & Kikuchi, M. (1988). Properties of Reinforced Concrete Beams Containing Recycled Aggregate. 2nd International Symposium RILEM, V. 2, Demolition and Reuse of Concrete and Masonry, Tokyo, Japan, Chapman & Hall, London-New York, pp. 670-679 ACI Committee 318, (2014). Building code requirements for structural concrete and commentary, ACI 318R, American Concrete Institute, Farmington Hills. Eurocode-2, (2004). Design of concrete structures-Part 1-1: General rules and rules for buildings, London: British Standard Institute. Magbool, H. M., Gamil, M., Issa, M. S., & El-Abbasy, A. (2024). Shear and flexural strength of reinforced concrete beams made with recycled coarse aggregate concrete. None. https://doi.org/10.2478/msp-2024-0026 Wang, Y., Cheng, J., & Wang, J. (2023). Flexural performance of recycled concrete beam reinforced with modified basalt fiber and nano-silica, Case Studies in Construction Materials. 18, e02022. https://doi.org/10.1016/j.cscm.2023.e02022. Zkl, Y., Althaqafi, E., Karalar, M., & Aksoylu, C. (2025). Shear and flexural performance of reinforced concrete beams with recycled concrete aggregates. Reviews on Advanced Materials Science. https://doi.org/10.1515/rams-2025-0140 IS: 12269, (2013) Ordinary Portland cement 53 grade-specification, Bureau of Indian Standards, New Delhi. IS: 383, (2016).Indian standard coarse and fine aggregate for concrete-Specification, Bureau of Indian Standards, New Delhi. IS: 4031, (1988). (Part 11), Methods of physical tests for hydraulic cement, Part 11-determination of density, Bureau of Indian Standards, New Delhi. IS: 4031, (1988). (Part 6), Methods of physical tests for hydraulic cement, Part 6-determination of compressive strength of hydraulic cement other than masonry cement, Bureau of Indian Standards, New Delhi. IS: 2386 (Part III), Method of test for aggregate for concrete, Part III-specific gravity, density, voids, absorption and bulking, Bureau of Indian Standards, New Delhi, (1963) (Reaffirmed 2002). IS: 2386 (2002), (Part IV), Method of test for aggregate for concrete, Part IV-mechanical properties, Bureau of Indian Standards, New Delhi, (1963). Indian Standard 10262. Concrete mix proportioning-guidelines (Second Revision), In: Indian Standard. IS: 5816, (1999). Indian standard splitting tensile strength of concrete - method of test Bureau of Indian Standards, New Delhi. IS: 516, (1959). Indian standard methods of tests for strength of concrete, Bureau of Indian Standards, New Delhi. IS: 1786, (2008). High strength steel bars and wires for concrete reinforcement-specification, Bureau of Indian Standards, New Delhi. IS: 456-2000, (2016). Plain and reinforced concrete code of practice, Bureau of Indian Standards, New Delhi. Amin, A., Tamal, S. C., Bari, A. K. M. F., Mazumder, M., & Hasan, Md. A., (2022). Strengthening of fire damaged reinforced beams by using ferro cement. Turkish Journal of Engineering, 6(3), 206-210. https://doi.org/10.31127/tuje.925199 BS 8110, (1997). Structural Use of Concrete Part 1: Code of practice for design and Construction, British Standards Institution, London. Khurshid, F., & Gunal, A. Y. (2024). Harnessing earthquake generated glass and plastic waste for sustainable construction. Turkish Journal of Engineering, 8 (2), 394-402. https://doi.org/10.31127/tuje.1405272 Kepir, Y., Gunoz, A., & Kara, M., (2022). Repairing of damaged composite materials and selfhealing composites, Turkish Journal of Engineering, 6(2), 149-155. https://doi.org/10.31127/tuje.866955 Bayer, İ. R., Turanlı, L., & Mehta, P. K. (2019). Mass Concrete Constructıon Usıng Self-Compactıng Mortar. Turkish Journal of Engineering, 3(3), 110-119. https://doi.org/10.31127/tuje.462548 Masne, N., & Pawar, A. (2025). Experimental and Numerical Investigation of Solid and Hollow Recycled Aggregate Concrete Beams Subjected To Torsion. Research on Engineering Structures and Materials. 11(5), 2175-2195. http://dx.doi.org/10.17515/resm2024.457me0920rs Masne, N., & Suryawanshi, S., (2023) Effect of replacement ratio on the torsional behaviour of recycled aggregate concrete beams. International Journal of Engineering, Transactions A: Basics, 36 (04): 659-668. https://doi.org/10.5829/ije.2023.36.04a.06 Masne, N., Chaudhari, A., & Pawar, A. (2025) Simple model to predict the torsional strength of recycled aggregate concrete beam. Asian Journal of Civil Engineering.26, 2117-2133. https://doi.org/10.1007/s42107-025-01302-1