ANAHTARLAMALI RELÜKTANS MAKİNALARIN AKI VE ENDÜKTANS ÖLÇÜM METOTLARININ İNCELENMESİ

Year 2009, Volume: 1 Issue: 2, 21 - 33, 01.06.2009

Oğuz Üstün

Abstract

Bu makalede anahtarlamalı relüktans makinaların akı ve endüktans ölçüm metotları incelenmiştir. Genel olarak kullanılan üç ölçme metodu statik DC, statik AC ve dinamik ölçme metotları ayrı ayrı ele alınmıştır ve aralarındaki farklar ortaya konulmuştur. Amaç anahtarlamalı relüktans makinaların endüktans profilinin çıkartılmasında hangi yöntemin daha uygun olduğunun ortaya koyulmasıdır. Bu amaca yönelik olarak öncelikle gerçek anahtarlamalı relüktans makinaların endüktans profiline yakın bir endüktans modeli belirlenmiştir. Bu model kullanılarak ölçme yöntemlerinin benzetim çalışmaları gerçekleştirilmiştir. Aynı zamanda 8/6 bir anahtarlamalı relüktans makina ile ölçümler yapılarak deneysel sonuçlarla da bu benzetimsel çalışma desteklenmiştir.

Keywords

Anahtarlamalı relüktans makinalar, endüktans ölçümü, akı ölçümü, statik test, dinamik test

INVESTIGATION OF FLUX AND INDUCTANCE MEASUREMENT METHODS OF THE SWITCHED RELUCTANCE MACHINES

Abstract

In the present study, flux and inductance measurement methods of the switched reluctance machines have been investigated. The three measurement methods which are static DC, static AC and dynamic measurement methods have been discussed separately, and difference among them have been introduced. The aim is to present the proper method for the providing the inductance profile of the switched reluctance machine. For this reason, firstly an inductance model that approximates the real inductance profile of the switched reluctance machine has been identified. Simulation studies of the measurement methods have been achieved by using this model. The simulation results have been proved with experimental measurements of an 8/6 switched reluctance machines.

Keywords

Switched Reluctance Machines, inductance measurement, flux measurement, static test, dynamic test

References

• Beno, M. M., Marimuthu, N.S. (2009). A simple and low-cost measurement system for switched reluctance motor drive, International Journal of Power Electronics, 1(4), 381–396.
• Cheok, A. D., Ertugrul, N. (2001). Computer-based automated test Measurement system for determining magnetization characteristics of switched reluctance motors, IEEE Trans. on Inst. and Meas., 50(3), 690-696.
• Cheok, A. D., Wang, Z. (2007). DSP-based automated error-reducing flux-linkage- measurement method for switched reluctance motors, IEEE Trans. on Inst. and Meas., vol. 56, No. 6, 2007, 2245-2253.
• Gobbi, R. N., Sahoo, C., Vejian, R. (2008). Experimental investigations on computer-based methods for determination of static electromagnetic characteristics of switched reluctance motors. IEEE Trans. on Inst. and Meas., 57(10), 2008.
• Hajdarevic, I., Kofler, H. (2003). A closer view on inductance in switched reluctance motors,
• The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, 22(4), 847-861. Krishnan, R. (2001). Switched Reluctance Motor Drives: Modeling, Simulation, Analysis,
• Design, and Applications, CRC Pres, USA. Lawrenson, P. J., Stephenson, J. M., Blenkinsop, P. T., Corda, J., Fulton, N. N. (1980).
• Variable-speed switched reluctance motors. IEE Proc. B, 127(4), 253–265. Radimov, N., Hail, N. B., Rabinovici, R. (2005). Inductance measurements in switched reluctance machines. IEEE Trans. on Magn., 41(4), 1296-1299.
• Ray W.F., Erfan F., (1994). A new method of flux or inductance measurement for switched reluctance motors, International Conference on Power Electronics and Variable Speed Drives, 28 October, London, UK, 137-140.
• Sharma, V. K., Murthy, S. S., Singh, B. (1999). An improved method for the determination of saturation characteristics of switched reluctance motors, IEEE Trans. on Inst. and Meas., (5), 995-1000.
• Ustun, O. (2009). Measurement and real-time modeling of inductance and flux linkage in switched reluctance motors, IEEE Trans. on Magn.,(accepted paper).
• Wang, C., Liu, Y. H., Liao, W. H., Tu., C. L. (2008). An automated measurement system for determining magnetization characteristics of switched reluctance motors, IEEE International
• Conference on Industrial Informatics, 13-16 July, Daejeon, Korea ,639-644.