Araştırma Makalesi
BibTex RIS Kaynak Göster

Comparison of Common Deep Drawing Steel Sheets in terms of Blank Holder Force and Friction Conditions

Yıl 2018, Cilt: 2 Sayı: 3, 36 - 41, 30.09.2018
https://doi.org/10.30939/ijastech..463629

Öz

In this study, it
is aimed to make comparison of four different steel sheet materials that are
widely used in deep drawing applications by taking blank holder force and
friction conditions into account. Comparison is made between a standard steel
which is generally used in white goods manufacturing (DC01), an ultralow carbon
steel (DC04), a deep drawing steel suitable for cold forming (DD13) and an
extra deep drawing steel resistant to ageing (DD14), which are preferred when
manufacturing a part by deep drawing, if there is not any special material
requirements. The purpose of this study is to make selection between these
mentioned materials easier. Simufact.forming, a plastic deformation analysis
software based on finite element method, and material database of the software
was used in the conducted analyzes. Various blank holder forces were applied
and friction conditions were changed for each material. By investigating
obtained results, it was seen that there is a significant difference between
deep drawing behavior of these materials and DD14 has high deep drawability
even under high blank holder forces with low energy. Moreover, it was observed
that friction conditions have a significant influence on effectiveness of deep
drawing process.

Kaynakça

  • Groover, M.P., (2016). Fundamentals of modern manufac-turing: materials, processes, and systems, Sixth ed. John Wiley & Sons, Inc., Hoboken, NJ.
  • Vahdat, V., Santhanam, S., Chun, Y.W., (2006). A numeri-cal investigation on the use of drawbeads to minimize ear formation in deep drawing. J Mater Process Tech 176.
  • Yagami, T., Manabe, K., Yamauchi, Y., (2007). Effect of alternating blank holder motion of drawing and wrinkle elim-ination on deep-drawability. J Mater Process Tech 187, 187-191.
  • Chengzhi, S., Guanlong, C., Zhongqin, L., (2005). Deter-mining the optimum variable blank-holder forces using adap-tive response surface methodology (ARSM). Int J Adv Man-uf Tech 26, 23-29.
  • Kitayama, S., Natsume, S., Yamazaki, K., Han, J., Uchida, H., (2016). Numerical investigation and optimization of pul-sating and variable blank holder force for identification of formability window for deep drawing of cylindrical cup. Int J Adv Manuf Tech 82, 583-593.
  • Anonymous, (2017). Erdemir Sheet Metal Catalog. Ereğli Iron and Steel Factory.
  • MSC Software Corporation, (2015). Simufact.forming 14.0, Izmir.
Yıl 2018, Cilt: 2 Sayı: 3, 36 - 41, 30.09.2018
https://doi.org/10.30939/ijastech..463629

Öz

Kaynakça

  • Groover, M.P., (2016). Fundamentals of modern manufac-turing: materials, processes, and systems, Sixth ed. John Wiley & Sons, Inc., Hoboken, NJ.
  • Vahdat, V., Santhanam, S., Chun, Y.W., (2006). A numeri-cal investigation on the use of drawbeads to minimize ear formation in deep drawing. J Mater Process Tech 176.
  • Yagami, T., Manabe, K., Yamauchi, Y., (2007). Effect of alternating blank holder motion of drawing and wrinkle elim-ination on deep-drawability. J Mater Process Tech 187, 187-191.
  • Chengzhi, S., Guanlong, C., Zhongqin, L., (2005). Deter-mining the optimum variable blank-holder forces using adap-tive response surface methodology (ARSM). Int J Adv Man-uf Tech 26, 23-29.
  • Kitayama, S., Natsume, S., Yamazaki, K., Han, J., Uchida, H., (2016). Numerical investigation and optimization of pul-sating and variable blank holder force for identification of formability window for deep drawing of cylindrical cup. Int J Adv Manuf Tech 82, 583-593.
  • Anonymous, (2017). Erdemir Sheet Metal Catalog. Ereğli Iron and Steel Factory.
  • MSC Software Corporation, (2015). Simufact.forming 14.0, Izmir.
Toplam 7 adet kaynakça vardır.

Ayrıntılar

Birincil Dil İngilizce
Konular Makine Mühendisliği
Bölüm Research Articles
Yazarlar

Özgür Özdilli

M. Emin Erdin

Yayımlanma Tarihi 30 Eylül 2018
Gönderilme Tarihi 25 Eylül 2018
Kabul Tarihi 29 Eylül 2018
Yayımlandığı Sayı Yıl 2018 Cilt: 2 Sayı: 3

Kaynak Göster

APA Özdilli, Ö., & Erdin, M. E. (2018). Comparison of Common Deep Drawing Steel Sheets in terms of Blank Holder Force and Friction Conditions. International Journal of Automotive Science And Technology, 2(3), 36-41. https://doi.org/10.30939/ijastech..463629
AMA Özdilli Ö, Erdin ME. Comparison of Common Deep Drawing Steel Sheets in terms of Blank Holder Force and Friction Conditions. ijastech. Eylül 2018;2(3):36-41. doi:10.30939/ijastech.463629
Chicago Özdilli, Özgür, ve M. Emin Erdin. “Comparison of Common Deep Drawing Steel Sheets in Terms of Blank Holder Force and Friction Conditions”. International Journal of Automotive Science And Technology 2, sy. 3 (Eylül 2018): 36-41. https://doi.org/10.30939/ijastech. 463629.
EndNote Özdilli Ö, Erdin ME (01 Eylül 2018) Comparison of Common Deep Drawing Steel Sheets in terms of Blank Holder Force and Friction Conditions. International Journal of Automotive Science And Technology 2 3 36–41.
IEEE Ö. Özdilli ve M. E. Erdin, “Comparison of Common Deep Drawing Steel Sheets in terms of Blank Holder Force and Friction Conditions”, ijastech, c. 2, sy. 3, ss. 36–41, 2018, doi: 10.30939/ijastech..463629.
ISNAD Özdilli, Özgür - Erdin, M. Emin. “Comparison of Common Deep Drawing Steel Sheets in Terms of Blank Holder Force and Friction Conditions”. International Journal of Automotive Science And Technology 2/3 (Eylül 2018), 36-41. https://doi.org/10.30939/ijastech. 463629.
JAMA Özdilli Ö, Erdin ME. Comparison of Common Deep Drawing Steel Sheets in terms of Blank Holder Force and Friction Conditions. ijastech. 2018;2:36–41.
MLA Özdilli, Özgür ve M. Emin Erdin. “Comparison of Common Deep Drawing Steel Sheets in Terms of Blank Holder Force and Friction Conditions”. International Journal of Automotive Science And Technology, c. 2, sy. 3, 2018, ss. 36-41, doi:10.30939/ijastech. 463629.
Vancouver Özdilli Ö, Erdin ME. Comparison of Common Deep Drawing Steel Sheets in terms of Blank Holder Force and Friction Conditions. ijastech. 2018;2(3):36-41.

International Journal of Automotive Science and Technology (IJASTECH) is published by Society of Automotive Engineers Turkey


9328