MICROSTRUCTURES AND MECHANICAL PROPERTIES OF Al85Ni12.5Si2.5 ALLOY

Yıl 2018, Cilt: 3 Sayı: 3, 79 - 85, 01.01.2019

Musa Gogebakan Sarwar İbrahim Saleh Hakan Yaykaşlı Celal Kursun Hasan Eskalen

Öz

This study produced Al₈₅Ni_12.5Si_2.5
alloy by
arc melting method. This alloy was annealed at four different temperatures (200 ºC, 300 ºC, 400 ºC, 500 ºC). After annealing alloys
analyzes were performed for microstructural, mechanical and thermal behaviour
properties of X-ray diffraction (XRD), scanning electron microscopy (SEM) and
differential thermal analysis (DTA).  The
XRD results crystalline phases a-Al,
Si, Al₃Ni and Al₃Ni₂ were detected. The SEM investigations showed the formation of a-Al,
Si and Al₃Ni. The DTA
curves the melting point temperature of Al₃Ni is to be as 574.8ºC. Mechanical properties of the
as-cast and subsequently the micro hardness values of sample annealed
at 300 ºC, 400 and 500 ºC were 135.8, 135.2 and 130 HV
respectively.

Anahtar Kelimeler

Al-Ni-Si Alloy, Arc Melting, Microstructure

Kaynakça

• 1. Gupta RK, Murty B, Birbilis N. An Overview of High-energy Ball Milled Nanocrystalline Aluminum Alloys. Springer; 2017.
• 2. Shaha S, Czerwinski F, Kasprzak W, Friedman J, Chen D. Ageing characteristics and high-temperature tensile properties of Al–Si–Cu–Mg alloys with micro-additions of Mo and Mn, Materials Science and Engineering: A, 2017, 684, 726-736.
• 3. Yang L, Li W, Du J, Wang K, Tang P. Effect of Si and Ni contents on the fluidity of Al-Ni-Si alloys evaluated by using thermal analysis, Thermochimica Acta, 2016, 645, 7-15.4. Song K, Bian X, Guo J, et al., Effects of Ce and Mm additions on the glass forming ability of Al–Ni–Si metallic glass alloys, Journal of alloys and compounds, 2007, 440, L8-L12.
• 5. Shen Y, Perepezko J. Al-based amorphous alloys: Glass-forming ability, crystallization behavior and effects of minor alloying additions, Journal of Alloys and Compounds, 2017, 707, 3-11.
• 6. Kim J, Hong S, Park J, Eckert J, Kim K. Microstructure and mechanical properties of hierarchical multi-phase composites based on Al-Ni-type intermetallic compounds in the Al-Ni-Cu-Si alloy system, Journal of Alloys and Compounds, 2018, 749, 205-210.
• 7. Tiwary C, Kashyap S, Kim D, Chattopadhyay K. Al based ultra-fine eutectic with high room temperature plasticity and elevated temperature strength, Materials Science and Engineering: A, 2015, 639, 359-369.
• 8. Hou L, Li B, Wu R, et al., Microstructure and mechanical properties at elevated temperature of Mg-Al-Ni alloys prepared through powder metallurgy, Journal of Materials Science & Technology, 2017, 33, 947-953.
• 9. Huang W, Chang Y. A thermodynamic analysis of the Ni Al system, Intermetallics, 1998, 6, 487-498.
• 10. Qian J, Li J, Xiong J, Zhang F, Lin X. In situ synthesizing Al3Ni for fabrication of intermetallic-reinforced aluminum alloy composites by friction stir processing, Materials Science and Engineering: A, 2012, 550, 279-285.
• 11. Purja Pun G, Mishin Y. Development of an interatomic potential for the Ni-Al system, Philosophical Magazine, 2009, 89, 3245-3267.
• 12. Inoue A, Horio Y, Masumoto T. Elevated-temperature strength of an Al88Ni9Ce2Fe1 amorphous alloy containing nanoscale fcc-Al particles, Materials Transactions, JIM, 1992, 33, 669-674.
• 13. Guo F, Poon S, Shiflet G. Investigation of glass formability in Al-based multinary alloys, Scripta materialia, 2000, 43, 1089-1095.
• 14. Inoue A, Ohtera K, Tsai A-P, Masumoto T. Aluminum-based amorphous alloys with tensile strength above 980 MPa (100 kg/mm2), Japanese Journal of Applied Physics, 1988, 27, L479.
• 15. Ronto V, Battezzati L, Yavari A, Tonegaru M, Lupu N, Heunen G. Crystallization behaviour of Al87Ni7La6 and Al87Ni7Sm6 amorphous alloys, Scripta materialia, 2004, 50, 839-843.
• 16. Battezzati L, Pozzovivo S, Rizzi P. Phase Transformations in Al87Ni7Ce6 and Al87Ni7Nd6 amorphous alloys, Materials Transactions, 2002, 43, 2593-2599.
• 17. McKay B, Cizek P, Schumacher P, O’Reilly K. Heterogeneous Nucleation of α-Al in Al-Ni-Si Alloys. In: Essential Readings in Light Metals. Springer; 2016:375-380.
• 18. Muratov O, Roik O, Kazimirov V, et al., X-ray diffraction studies of the Ni–Si and Al–Ni–Si melts, Journal of Molecular Liquids, 2014, 200, 213-222.
• 19. Aversa A, Lorusso M, Cattano G, et al., A study of the microstructure and the mechanical properties of an AlSiNi alloy produced via selective laser melting, Journal of Alloys and Compounds, 2017, 695, 1470-1478.
• 20. Senkov O, Scott J, Miracle D. Crystallization kinetics of an amorphous Al85Ni10Y2. 5La2. 5 alloy, Journal of alloys and compounds, 2002, 337, 83-88.
• 21. Sauvage X, Dinda G, Wilde G. Non-equilibrium intermixing and phase transformation in severely deformed Al/Ni multilayers, Scripta Materialia, 2007, 56, 181-184.