Year 2017, Volume 4, Issue 3, Pages 206 - 213 2017-11-01

Interpreting Temperature Based Discontinuity and Roughness of Rock Surfaces by Using Photogrammetric Technique

Abdullah Harun İncekara [1] , Dursun Zafer Şeker [2] , Celil Serhan Tezcan [3] , Erkan Bozkurtoglu [4] , Cem Gazioğlu [5]

194 295

The discontinuity and roughness properties of the rocks can be used to obtain information on surface characterization. In this study, it was investigated whether the discontinuity and roughness properties of the rock structure are related to the temperature of the surface. Selected object which is located at Istanbul Technical University Ayazaga Campus has approximately dimensions of 3 m x 1 m. The discontinuity regions on the object and the areas which are rougher than their surroundings are clearly identifiable by visual interpretation. 3D model of rock surface was produced by integrating photographs and 12 control points which were homogeneously distributed on the object in order to reflect the surface realistically. The temperature of the control points marked on the surface were measured by using an infrared thermometer with non-contact measuring capability. These values were used as the basic data to show the temperature distribution over the entire surface. Temperature distribution map with 6 classes representing the temperature range was produced by using IDW interpolation method in a commercial GIS software. The temperature distribution map was overlapped on the 3D object model produced by means of RGB photographs for comparison with the 3D model produced by the thermal images of the same surface. The temperature distribution in the discontinuity regions that can be clearly seen as rough was examined and obtained results proved that there is a strong relationship between roughness and temperature of the rock surfaces.

Interpolation, Photogrammetry, Rock, Roughness, Temperature
  • Anbarasan, S., Sakthivel, R. (2017). Digital rock surface mapping of Sittampoondi Anorthosite complex using close range photogrammetry technique. International Journal of Advances in Remote Sensing and GIS, 5(1), 1-9.
  • Avşar, E.O., Bozkurtoğlu, E., Aydar, U., Şeker, D.Z., Kaya, Ş., Gazioğlu, C. (2016). Determining roughness angle of limestone using optical laser scanner. International Journal of Environment and Geoinformatics (IJEGEO), 3(3), 57-75.
  • Ge, Y., Tang, H., EZ Eldin, M.A.M., Chen, P., Wang, L., Wang, J. (2015). A description for rock joint roughness based on terrestrial laser scanner and image analysis. Scientific Reports, 5(16999), doi: 10.1038/srep16999.
  • Kim, D.H., Gratchev, I., Balasubramaniam, A. (2015). A photogrammetric approach for stability analysis of weathered rock slopes. Geotechnical and Geological Engineering, 33(3), 443-454.
  • Kim, D.H., Poropat, G., Gratchev, I., Balasubramaniam, A. (2016). Assessment of the accuracy of close distance photogrammetric JRC data. Rock Mechanics and Rock Engineering, 49(11), 4285-4301.
  • Nilsson M., Edelbro, C., Sharrock G. (2012). Small scale joint surface roughness evaluation using digital photogrammetry. EUROCK 2012-Rock Engineering and Technology for Sustainable Underground Construction, Stockholm, Sweden.
  • Ocakoğlu, F. (2014). Genel Jeoloji-1. Osmangazi Üniversitesi, Jeoloji Mühendisliği Bölümü, Eskişehir. Poropat, G.V. (2009). Measurements of Surface Roughness of Rock Discontinuities. Proceedings of the 3rd CANUS Rock Mechanism Symposium, Toronto.
  • Schultz, R.A., Fossen, H. (2008). Terminology for structural discontinuties. The American Association of Petroleum Geologists (AAPG), 92(7), 853-867.
  • Tatone B.S.A., Grasselli G. (2012). An investigation of discontinuity roughness scale dependency using high-resolution surface measurements. Rock Mechanics and Rock Engineering, 46(4), 657-681.
  • Wernecke, C., Marsch, K. (2015). Mapping rock surface roughness with photogrammetry. ISRM Regional Symposium EUROCK-Future Development of Rock Mechanics, Salzburg, Austria.
Journal Section Research Articles
Authors

Author: Abdullah Harun İncekara
Institution: Gaziosmanpasa University, Faculty of Natural Sciences and Engineering, Department of Geomatics Engineering
Country: Turkey


Author: Dursun Zafer Şeker
Institution: Istanbul Technical University, Faculty of Civil Engineering, Department of Geomatics Engineering
Country: Turkey


Author: Celil Serhan Tezcan
Institution: Istanbul Technical University, Faculty of Civil Engineering, Department of Geomatics Engineering
Country: Turkey


Author: Erkan Bozkurtoglu
Institution: ISTANBUL TECHNICAL UNIVERSITY, FACULTY OF MINING, DEPARTMENT OF GEOLOGICAL ENGINEERING
Country: Turkey


Author: Cem Gazioğlu
Institution: Istanbul University, Institute of Marine Sciences and Management, Department of Marine Environment
Country: Turkey


Dates

Publication Date: November 1, 2017

Bibtex @research article { ijegeo348806, journal = {International Journal of Environment and Geoinformatics}, issn = {}, eissn = {2148-9173}, address = {Cem GAZİOĞLU}, year = {2017}, volume = {4}, pages = {206 - 213}, doi = {10.30897/ijegeo.348806}, title = {Interpreting Temperature Based Discontinuity and Roughness of Rock Surfaces by Using Photogrammetric Technique}, key = {cite}, author = {İncekara, Abdullah Harun and Şeker, Dursun Zafer and Tezcan, Celil Serhan and Bozkurtoglu, Erkan and Gazioğlu, Cem} }
APA İncekara, A , Şeker, D , Tezcan, C , Bozkurtoglu, E , Gazioğlu, C . (2017). Interpreting Temperature Based Discontinuity and Roughness of Rock Surfaces by Using Photogrammetric Technique. International Journal of Environment and Geoinformatics, 4 (3), 206-213. DOI: 10.30897/ijegeo.348806
MLA İncekara, A , Şeker, D , Tezcan, C , Bozkurtoglu, E , Gazioğlu, C . "Interpreting Temperature Based Discontinuity and Roughness of Rock Surfaces by Using Photogrammetric Technique". International Journal of Environment and Geoinformatics 4 (2017): 206-213 <http://dergipark.org.tr/ijegeo/issue/31803/348806>
Chicago İncekara, A , Şeker, D , Tezcan, C , Bozkurtoglu, E , Gazioğlu, C . "Interpreting Temperature Based Discontinuity and Roughness of Rock Surfaces by Using Photogrammetric Technique". International Journal of Environment and Geoinformatics 4 (2017): 206-213
RIS TY - JOUR T1 - Interpreting Temperature Based Discontinuity and Roughness of Rock Surfaces by Using Photogrammetric Technique AU - Abdullah Harun İncekara , Dursun Zafer Şeker , Celil Serhan Tezcan , Erkan Bozkurtoglu , Cem Gazioğlu Y1 - 2017 PY - 2017 N1 - doi: 10.30897/ijegeo.348806 DO - 10.30897/ijegeo.348806 T2 - International Journal of Environment and Geoinformatics JF - Journal JO - JOR SP - 206 EP - 213 VL - 4 IS - 3 SN - -2148-9173 M3 - doi: 10.30897/ijegeo.348806 UR - https://doi.org/10.30897/ijegeo.348806 Y2 - 2017 ER -
EndNote %0 International Journal of Environment and Geoinformatics Interpreting Temperature Based Discontinuity and Roughness of Rock Surfaces by Using Photogrammetric Technique %A Abdullah Harun İncekara , Dursun Zafer Şeker , Celil Serhan Tezcan , Erkan Bozkurtoglu , Cem Gazioğlu %T Interpreting Temperature Based Discontinuity and Roughness of Rock Surfaces by Using Photogrammetric Technique %D 2017 %J International Journal of Environment and Geoinformatics %P -2148-9173 %V 4 %N 3 %R doi: 10.30897/ijegeo.348806 %U 10.30897/ijegeo.348806
ISNAD İncekara, Abdullah Harun , Şeker, Dursun Zafer , Tezcan, Celil Serhan , Bozkurtoglu, Erkan , Gazioğlu, Cem . "Interpreting Temperature Based Discontinuity and Roughness of Rock Surfaces by Using Photogrammetric Technique". International Journal of Environment and Geoinformatics 4 / 3 (November 2017): 206-213. https://doi.org/10.30897/ijegeo.348806
AMA İncekara A , Şeker D , Tezcan C , Bozkurtoglu E , Gazioğlu C . Interpreting Temperature Based Discontinuity and Roughness of Rock Surfaces by Using Photogrammetric Technique. International Journal of Environment and Geoinformatics. 2017; 4(3): 206-213.
Vancouver İncekara A , Şeker D , Tezcan C , Bozkurtoglu E , Gazioğlu C . Interpreting Temperature Based Discontinuity and Roughness of Rock Surfaces by Using Photogrammetric Technique. International Journal of Environment and Geoinformatics. 2017; 4(3): 213-206.