A Comparative Study between Matrix Converter Fed InductionMotor Drive and Dual-Matrix Converter Fed Open-End WindingInduction Motor Drive

Yıl 2017, Cilt: 12 Sayı: 2, 91 - 99, 01.10.2017

A. Beladel A. Kouzou A. Hafaıfa Sedat Sunter D. Mahıa

Öz

This paper deals with a comparative study between the control of three to three phase matrix converter feeding a
star-connected three phase induction machine and the control of three to three phase dual matrix converter
feeding an open-end winding induction machine. The control strategy used in both cases is based on a proposed
direct transfer function control approach of Venturini algorithm which allows to obtain a unity power factor at
the input side to boost the output phase voltage up to 150% compared to the input phase voltage, while keeping
the main advantage of the matrix converter by providing a fully bidirectional power flow operation. The main
objective of using the open-end winding topology is to ensure the minimization of the common mode voltage
which is clearly observed in the case of star-connected winding. Simulation results are presented under both
control strategies, where both matrix converters are supplied from the same three-phase power source. Whereas;
the two output voltage system of the dual matrix converter are shifted with 180 degrees. Based on the obtained
results the performances of the both control approaches are technically discussed.

Anahtar Kelimeler

Matrix converter, Dual matrix converter, Direct transfer function approach, Simulation Model, Open-EndInduction Machine Drive

Kaynakça

• 1. Riedemanna, J., Andradeb, I., Peñab, R., BlascoGimenezc, R.,Clare J., Melin, P., Rivera, M. (2016). Modulation strategies for an open-end winding induction machine fed by a two-output indirect matrix converter, Mathematics and Computers in Simulation,144-152.
• 2.Wheeler, P.W., Rodriguez P.W., Clare, J.C., Empringham, L., Weinstein, A., (2002). Matrix converters: A technology review. IEEE Transactions on Industrial Electronics, 49(2), 276-288.
• 3. Vargas, R., Rodríguez, J., Ammann, U., Wheeler, PW. (2008). Predictive current control of an induction machine fed by a matrix converter with reactive power control. IEEE Transactions on Industrial Electronics, 55(12), 4362-4371.
• 4. Venturini, M. (1980). A new sine wave in sine wave out, conversion technique which eliminates reactive elements. POWERCON 7, E3-1-E3-15.
• 5. Alesina, A., Venturini, M. (1989). Analysis and design of optimum-amplitude nine-switch direct ACAC converters, IEEE Transactions on Power Electronics, 4(1), 101-112.
• 6. Ahmed, S.M., Abu-Rub, H., Kouzou, A. (2013). Predictive simultaneous power and current control in a three-phase direct matrix converter. International Conference on Power Electronics and Their Applications (ICPEA), Djefia-Algeria.
• 7. Bachir, G., Bendiabdellah, A. (2009). A comparative study between two control strategies for matrix converter. Advances in Electrical and Computer Engineering, 9(2), 23-27.
• 8. Beladel, A., Kouzou, A., Hafaifa, A., Mahia D., (2016). Dual matrix converter feeding an open-end winding load based on modified direct transfer approach, International Scientific Conference on Engineering, Technologies and Systems.
• 9. Altun, H., Sünter, S. (2003). Matrix converter induction motor drive: modeling, simulation and control. Electrical Engineering, 86(1), 25-33.
• 10. Rodriguez, J., Silva, E., Wheeler, P., (2013). Matrix converter controlled with the direct transfer function approach:analysis, modelling and simulation, International Journal of Electronics, 63-85.
• 11. Djahbar A., Mazari B., (2007). High performance motor drive using matrix converter, Acta Electrotechnica et Informatica, 2(7).
• 12. Guizana, S., Ammar, F.B., (2005). Dual open-end stator winding induction machine fed by redundant voltage source inverters, Turkish Journal of Electrical Engineering & Computer Sciences, 92(2), 2171-2181.
• 13. Riedemann, J., Clare, J.C., Wheeler, P.W., Blasco-Gimenez, R., Rivera, M., Pena, R. (2016). Open-end winding induction machine fed by a dualoutput indirect matrix converter. IEEE Transactions on Industrial Electronics, 63(7), 4118-4128.
• 14. Gopal, M., Gopakumar, K., Tekwani, P.N., Emil, L.A., (2007). Reduced-switch-count five-level inverter with common-mode voltage elimination for an open-end winding induction motor drive, IEEE Transactions on Industrial Electronics, 54(4).
• 15. Elbar, M., Mahmoidi, M.O., Naas, B., (2010). A Carrier-Based PWM Techniques Applied to a ThreeLevel Four-Leg Inverter For Use as a Shunt Active Power Filter, J. Electrical Systems, Special Issue (2), 47-57.