TY  - JOUR
T1  - ÇEVRİMSEL ÖN YÜKLEMENİN POLİPROPİLEN’İN GEVŞEME DAVRANIŞI ÜZERİNDEKİ ETKİSİ
AU  - Düşünceli, Necmi
AU  - Özensoy, Önder Çağdaş
PY  - 2021
DA  - December
DO  - 10.17780/ksujes.1014509
JF  - Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi
JO  - KSU J. Eng. Sci.
PB  - Kahramanmaraş Sütçü İmam Üniversitesi
WT  - DergiPark
SN  - 1309-1751
SP  - 359
EP  - 370
VL  - 24
IS  - 4
LA  - tr
AB  - Bu çalışmada, oda sıcaklığında izotaktik polipropilen üzerinde yükleme-boşaltma ve yeniden yükleme sonrası yapılan gevşeme testlerine dair gözlemler rapor edilmiştir. Deneysel veriler, gevşeme testinin başlangıcında maksimum gerilme ve başlangıç gerilmesi arasındaki farkın artmasıyla birlikte gevşeme eğrilerinin şekillerinde belirgin değişiklikler olduğunu göstermiştir. Testin başlangıcında gerilme geleneksel gevşemeden farklı olarak önce artıp sonra monoton olarak azalmaktadır. Basit gevşemeden karma gevşemeye geçişte ön yüklemenin etkisini araştırmak için farklı çevrim sayısı ve gerilme seviyelerinde testler gerçekleştirilmiştir.
KW  - Izotaktik polipropilen
KW  - hasar birikimi
KW  - çevrimsel deformasyon
KW  - gevşeme.
CR  - Ariyama, T. (1993). Stress relaxation behavior after cyclic preloading in polypropylene. Polymer Engineering & Science, 33(22), 1494–1501. https://doi.org/10.1002/pen.760332209
CR  - ASTM INTERNATIONAL. (2014). Astm D638-14. Annual Book of ASTM Standards. https://doi.org/10.1520/D0638-14.1
CR  - Ayoub, G., Zaïri, F., Naït-Abdelaziz, M., & Gloaguen, J. M. (2010). Modelling large deformation behaviour under loading-unloading of semicrystalline polymers: Application to a high density polyethylene. International Journal of Plasticity, 26(3), 329–347. https://doi.org/10.1016/j.ijplas.2009.07.005
CR  - Baral, P., Guillonneau, G., Kermouche, G., Bergheau, J. M., Loubet, J. L., Bennin, T., Ricci, J., Ediger, M. D., Bouvard, J. L., Francis, D. K., Tschopp, M. A., Marin, E. B., Bammann, D. J., Horstemeyer, M. F., Chen, K., Schweizer, K. S., Cifuentes, S. C., 
Frutos, E., Benavente, R., … Ullah, N. (2019). Effect of loading rate on the creep behaviour of epoxy resin insulators by nanoindentation. Macromolecules, 27(2), 11786–11797. https://doi.org/10.1007/s11029-012-9266-6
CR  - Brusselle-Dupend, N., & Cangémi, L. (2008). A two-phase model for the mechanical behaviour of semicrystalline polymers. Part I: Large strains multiaxial validation on HDPE. Mechanics of Materials, 40(9), 743–760. https://doi.org/10.1016/j.mechmat.2008.03.011
CR  - Caelers, H. J. M., Govaert, L. E., & Peters, G. W. M. (2016). The prediction of mechanical performance of isotactic polypropylene on the basis of processing conditions. Polymer, 83, 116–128. https://doi.org/10.1016/j.polymer.2015.12.001
CR  - Detrez, F., Cantournet, S., & Seguela, R. (2011). Plasticity/damage coupling in semi-crystalline polymers prior to yielding: Micromechanisms and damage law identification. Polymer, 52(9). https://doi.org/10.1016/j.polymer.2011.03.012
CR  - Dusunceli, N., Sanporean, C. G., Drozdov, A. D., de Claville Christiansen, J., & Comanici, F.-E. (2021). Mechanical and microstructural characterization of poly(N-isopropylacrylamide) hydrogels and its nanocomposites. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. https://doi.org/10.1177/1464420720988301
CR  - Dusunceli, Necmi. (2012). The unusual creep and relaxation behaviour of polypropylene. Journal of Polymer Engineering, 32(3), 167–176. https://doi.org/10.1515/polyeng-2011-0159
CR  - Dusunceli, Necmi, & Aydemir, B. (2011). The effects of loading history and manufacturing methods on the mechanical behavior of high-density polyethylene. Journal of Elastomers and Plastics, 43(5), 451–468. https://doi.org/10.1177/0095244311404181
CR  - Dusunceli, Necmi, & Colak, O. U. (2006). High density polyethylene (HDPE): Experiments and modeling. Mechanics of Time-Dependent Materials. https://doi.org/10.1007/s11043-007-9026-5
CR  - E328-02(08). (2013). Standard Test Methods for Stress Relaxation for Materials and Structures. ASTM Book of Standards, 02(Reapproved 2008).
CR  - Ghoreishy, M. H. R., & Abbassi Sourki, F. (2018). Development of a new combined numerical/experimental approach for the modeling of the nonlinear hyper-viscoelastic behavior of highly carbon black filled rubber compound. Polymer Testing, 70(May), 135–143. https://doi.org/10.1016/j.polymertesting.2018.06.035
CR  - Gordeyev, S. A., & Ward, I. M. (1999). Time dependent recovery of oriented polyethylene. Journal of Materials Science, 34(19), 4767–4773. https://doi.org/10.1023/A:1004691206113
CR  - Heymans, N., & Kitagawa, M. (2004). Modelling “unsual” behaviour after strain reversal with hierarchical fractional models. Rheologica Acta, 43(4), 383–389. https://doi.org/10.1007/s00397-003-0354-3
CR  - Hiss, R., Hobeika, S., Lynn, C., & Strobl, G. (1999). Network stretching, slip processes, and fragmentation of crystallites during uniaxial drawing of polyethylene and related copolymers. A comparative study. Macromolecules, 32(13). https://doi.org/10.1021/ma981776b
CR  - Hong, K., Rastogi, A., & Strobl, G. (2004). A model treating tensile deformation of semicrystalline polymers: Quasi-static stress-strain relationship and viscous stress determined for a sample of polyethylene. Macromolecules, 37(26). https://doi.org/10.1021/ma049174h
CR  - Jourdan, C., Cavaille, J. Y., & Perez, J. (1989). Mechanical relaxations in polypropylene: A new experimental and theoretical approach. Journal of Polymer Science Part B: Polymer Physics, 27(11), 2361–2384. https://doi.org/10.1002/polb.1989.090271115
CR  - Kästner, M., Obst, M., Brummund, J., Thielsch, K., & Ulbricht, V. (2012). Inelastic material behavior of polymers - Experimental characterization, formulation and implementation of a material model. Mechanics of Materials, 52. https://doi.org/10.1016/j.mechmat.2012.04.011
CR  - Kitagawa, M., Zhou, D., & Qui, J. (1995). Stress‐Strain curves for solid polymers. Polymer Engineering & Science, 35(22), 1725–1732. https://doi.org/10.1002/pen.760352202
CR  - Kitagawa, M., Zhou, D., Shimada, K., & Umeoka, H. (1999). Anomalous behavior associated with unloading in polyethylene. Zairyo/Journal of the Society of Materials Science, Japan, 48(6), 592–597. https://doi.org/10.2472/jsms.48.592
CR  - Lipinski, B. M., Morris, L. S., Silberstein, M. N., & Coates, G. W. (2020). Isotactic Poly(propylene oxide): A Photodegradable Polymer with Strain Hardening Properties. Journal of the American Chemical Society, 142(14). https://doi.org/10.1021/jacs.0c01768
CR  - Mourad, A. H. I., Fouad, H., & Elleithy, R. (2009). Impact of some environmental conditions on the tensile, creep-recovery, relaxation, melting and crystallinity behaviour of UHMWPE-GUR 410-medical grade. Materials and Design, 30(10), 4112–4119. https://doi.org/10.1016/j.matdes.2009.05.001
CR  - Okereke, M. I., Buckley, C. P., & Siviour, C. R. (2012). Compression of polypropylene across a wide range of strain rates. Mechanics of Time-Dependent Materials, 16(4), 361–379. https://doi.org/10.1007/s11043-012-9167-z
CR  - Okereke, Michael I., & Akpoyomare, A. I. (2019). Two-process constitutive model for semicrystalline polymers across a wide range of strain rates. Polymer, 183, 121818. https://doi.org/10.1016/j.polymer.2019.121818
CR  - Tauheed, F., & Sarangi, S. (2014). Damage-induced stress-softening and viscoelasticity of limited elastic materials. Mechanics of Time-Dependent Materials, 18(3), 493–525. https://doi.org/10.1007/s11043-014-9239-3
CR  - Wang, F., & Weiss, R. A. (2018). Thermoresponsive Supramolecular Hydrogels with High Fracture Toughness. Macromolecules, 51(18), 7386–7395. https://doi.org/10.1021/acs.macromol.8b00490
CR  - Zrida, M., Laurent, H., Rio, G., Pimbert, S., Grolleau, V., Masmoudi, N., & Bradai, C. (2009). Experimental and numerical study of polypropylene behavior using an hyper-visco-hysteresis constitutive law. Computational Materials Science, 45(2), 516–527. https://doi.org/10.1016/j.commatsci.2008.11.017
UR  - https://doi.org/10.17780/ksujes.1014509
L1  - https://dergipark.org.tr/tr/download/article-file/2045425
ER  -