TY - JOUR T1 - Sualtında Birleştirilen AH36 Gemi Sacının Mikro Yapı ve Mekanik Özelliklerinin İncelenmesi TT - Investigation of The Microstructural and Mechanical Propertıes of AH36 Sheet Metal Joıned By Underwater Welding AU - Gürol, Uğur AU - Yıldız, Nur Benuşe AU - Baykal, Hakan AU - Koçak, Mustafa PY - 2023 DA - April Y2 - 2022 DO - 10.46399/muhendismakina.1027899 JF - Mühendis ve Makina PB - TMMOB Makina Mühendisleri Odası WT - DergiPark SN - 1300-3402 SP - 1 EP - 16 VL - 64 IS - 710 LA - tr AB - Bu çalışmada, örtülü elektrot ark kaynağı yöntemi ile yerli E6013 rutil elektrotlar (GeKaTec UW E6013) kullanılarak gemi imalat sektöründe; gemilerin gövdesinde ve tankların yapımında yaygın olarak kullanılan AH36 çelik plakaları su altında alın alına birleştirilmiştir. Kaynak işlemleri gerçek deniz ortamında 4 metrelik bir derinlikte uzman sanayi dalgıçları tarafından gerçekleştirilmiştir. Plakalar ilk olarak AWS D3.6 standardının gerekliliklerine uygun olarak tahribatsız muayene testlerine tabi tutulmuştur. Daha sonra su altında birleştirilen kaynaklı plakaların mekanik özelliklerini belirlemek amacıyla sertlik, çentik darbe, eğme ve çekme testleri uygulanmış olup, sonuçlar kaynak bölgesinde meydana gelen mikro yapısal dönüşümlerle birlikte yorumlanmıştır. KW - Islak Sualtı Kaynağı KW - Sualtı Kaynak Elektrotu KW - AH36 Gemi Sacı KW - Mekanik Test KW - Mikro Yapı İncelemesi N2 - In this study, AH36 steel plates, commonly used in the hull of ships and the construction of tanks in the marine industry, were butt welded underwater using the shielded metal arc welding method and E6013 (GeKaTec UW E6013) rutile electrodes. Welding operations were carried out by expert industrial divers at a depth of 4 meters in a real sea environment. The plates were first subjected to non-destructive testing tests by the requirements of the AWS D3.6 standard. Then, hardness, Charpy impact, bending, and tensile tests were performed to determine the mechanical properties of the welded plates joined underwater. Finally, the results were interpreted together with the microstructural transformations in the weld area. CR - Alajmi, E.F., Alqenaeci, A.A. (2017). Underwater welding techniques, International Journal of Engineering Research and Application, 7 (2), 14-17. CR - Balık, B.E. (2008). Gemi inşaatında kaynak sırası yöntem ilişkisi ve kaynak muayene planlarının incelenmesi (Yüksek Lisans Tezi), Yıldız Teknik Üniversitesi Fen Bilimleri Enstitüsü, İstanbul. CR - Brown, R.T. & Masubuchi, K. (1975). Fundamental research on underwater welding, Welding Research Supplement, June, 178-188. Retrieved from http://files.aws.org/wj/supplement/WJ_1975_06_s178.pdf CR - Boutsali, V.G. (2016). Study of microstructure and corrosion behavior of AH36 FSW welds and HSLA S690 ARC welds (Master Thesis), National Technical University of Athens, Athens. CR - Çolak, Z., Ayan, Y. ve Kahraman, N. (2020). Gerçek deniz ortamında su altı kaynağı ile birleştirilen Grade AH36 gemi sacının kaynak bölgesinin karakterizasyonu, Journal of the Faculty of Engineering and Architecture of Gazi University, 35(2), 775-785, Doi: https://doi.org/10.17341/gazimmfd.519055 CR - Fydrych, D., Labanowski, J. & Rogalski, G. (2013). Weldability of high strength steels in wet welding conditions, Polish Maritime Research, 20(2), 67-73. Doi: https://doi.org/10.2478/pomr-2013-0018 CR - Garašić, I., Underwater welding, Welding engineering and technology. Erişim adresi : https://www.eolss.net/sample-chapters/c05/E6-171-08.pdf CR - Gao, W., Wang, D., Cheng, F., Di, X., Deng, C. & Xu, W. (2016). Microstructural and mechanical performance of underwater wetwelded S355 steel, Journal of Materials Processing Technology, 238, 333-340. Doi: https://doi.org/10.1016/j.jmatprotec.2016.07.039 CR - Gürol, U., Baykal, H., Yıldız N.B., Yılmaz, C., Danışkan, Ö., Koçak, M. (2022). Investigation of the microstructural and mechanical properties of welding joints made with underwater electrodes, Journal of the Faculty of Engineering and Architecture of Gazi University, 37(4), 2211-2223. Doi: https://doi.org/10.17341/gazimmfd.990465 CR - İmdat, K., Kaya, Y. ve Kahraman, N. (2018). Grade A gemi sacının örtülü elektrod ark kaynak yöntemi ile sualtı ve atmosferik şartlarda birleştirilebilirliğinin araştırılması, Politeknik Dergisi, 21(3), 543-552. Doi: https://doi.org/10.2339/politeknik.428975 CR - Kahraman, N., Gülenç, B. & Durgutlu, A. (2005). Investıgation of the effect of electrode extension distance on microstructural and mechanical properties of low carbon steel welded with submerged arc welding, Gazi University Journal of Science, 18(3) 473-480. CR - Labanowski, J. (2011). Development of under-water welding techniques, Welding International, 25(12), 933-937, Doi: https://doi.org/10.1080/09507116.2010.540847 CR - Pessoa, E., Bracarense, A., Santos, V., Asunçao, F., Monteiro, M., Marinho, R., Vieira, L. & Siva, D. (2013). Wet welding field trials in shallow waters for structural repairs in floating oil production units, Proceedings of the ASME 2013 32nd International Conference on Ocean, Offshore and Arctic Engineering, France. Doi: https://doi.org/10.1115/OMAE2013-10097 CR - Rowe, M. & Liu, S. (2001). Recent developments in underwater wet welding. Science And Technology of Welding and Joining, 6(6), 387-396. Doi: https://doi.org/10.1179/stw.2001.6.6.387 CR - Tomkow, J., Fydrych, D. & Wilk, K. (2020a). Effect of electrode waterproof coating on quality of underwater wet welded joints, Materials, 13, 2947,1-15. Doi: https://doi.org/10.3390/ma13132947 CR - Tomkow, J., Janeczek, A., Rogalski, G. And Wolski, A. (2020b). Underwater local cavity welding of S460N steel, Materials, 13, 5535. Doi: https://doi.org/10.3390/ma13235535 CR - Winarto, W., Purnama, D. & Churniawan, I. (2018). The effect of different rutile electrodes on mechanical properties of underwater wet welded AH-36 steel plates”, AIP Conference Proceedings 1945, 020048, Doi: https://doi.org/10.1063/1.5030270 UR - https://doi.org/10.46399/muhendismakina.1027899 L1 - https://dergipark.org.tr/tr/download/article-file/2097695 ER -