TY  - JOUR
T1  - Preparation of high solid loading and low viscosity ceramic slurry for dip-coating method
TT  - Daldırarak kaplama yöntemi için katı yüklemesi yüksek ve viskozitesi düşük seramik kaplama çözeltisinin hazırlanması
AU  - Beyribey, Berceste
AU  - Persky, Joshua
PY  - 2022
DA  - July
Y2  - 2022
DO  - 10.28948/ngumuh.1096585
JF  - Niğde Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi
JO  - NÖHÜ Müh. Bilim. Derg.
PB  - Niğde Ömer Halisdemir Üniversitesi
WT  - DergiPark
SN  - 2564-6605
SP  - 776
EP  - 780
VL  - 11
IS  - 3
LA  - en
AB  - BaCe0.7Zr0.1Y0.16Zn0.04O3-δ (BCZYZ) ceramic slurry has been prepared with different solid loading and the maximum solid loading of the slurry has been predicted as 25 vol.% using the Krieger-Dougherty equation. The slurry with the maximum solid loading has been formulated and applied as an electrolyte on porous NiO/BCZYZ tubular supports by the dip-coating method. Cells sintered at 1500°C for 10h have been characterised by Scanning Electron Microscopy (SEM) analysis. The 30μ thick, very dense electrolyte layer has successfully been achieved with some closed pores.
KW  - Ceramic electrolyte
KW  - Dip-coating
KW  - NiO/BCZYZ
KW  - SOFC
N2  - Farklı katı yüklemelerine sahip BaCe0.7Zr0.1Y0.16Zn0.04O3-δ (BCZYZ) seramik çözeltileri hazırlandı ve çözelti için maksimum katı yüklemesi Krieger- Dougherty eşitliği yardımı ile hacimce %25 olarak belirlendi. Maksimum katı yüklemesine sahip kaplama çözeltisi hazırlanarak, daldırarak kaplama yöntemi ile elektrolit olarak gözenekli NiO/BCZYZ tüp seklindeki desteklerin üzerine kaplandı. 1500°C’deki 10 saatlik sinterleme işleminden sonra, taramalı elektron mikroskopu yardımı ile elektrolit karakterize edildi. 30μ kalınlıkta, kapalı gözenekler içeren, geçirimsiz elektrolit kaplaması elde edildi.
CR  - A. Torabi, T.H. Etsell, P. Sarkar, Dip coating fabrication process for micro-tubular SOFCs. Solid State Ionic, 192, 372-375, 2011. https://doi.org/ 10.1016/j.ssi.2010.09.050
CR  - B. Shri Prakash, S. Senthil Kumar and S.T. Aruna, Properties and development of Ni/YSZ as an anode material in solid oxide fuel cell: a review. Renewable and Sustainable Energy Reviews, 36, 149–179, 2014. https://doi.org/10.1016/j.rser.2014.04.043
CR  - J.T.S Irvine and P. Connor, Solid oxide fuel cells: Facts and Figures. Springer London, 2013.
CR  - C. Jia, M. Chen and M. Han, Performance and electrochemical analysis of solid oxide fuel cells based LSCF-YSZ nano-electrode, International Journal of Applied Ceramic Technology, 14 (5), 1006-1012, 2017. https://doi.org/10.1111/ijac.12748
CR  - K.R. Lee, C.J. Tseng, S.C. Jang, J.C. Lin, K.W. Wang, J.K. Chang, T.C. Chen and S.W. Lee, Fabrication of anode-supported thin BCZY electrolyte protonic fuel cells using NiO sintering aid, International Journal of Hydrogen Energy 44, 23784-23792, 2019. https://doi.org/10.1016/j.ijhydene.2019.07.097
CR  - Y. Meng, J. Gao, H. Huang, M. Zou, J. Duffy, J. Tong and K.S. Brinkman, A high-performance reversible protonic ceramic electrochemical cell based on a novel Sm-doped BaCe0.7Zr0.1Y0.2O3-δ electrolyte, Journal of Power Sources 439, 227093-227097, 2019. https://doi.org/10.1016/j.jpowsour.2019.227093
CR  - A. Mat, M. Canavar, B. Timurkutluk and Y. Kaplan, Investigation of micro-tube solid oxide fuel cell fabrication using extrusion method, International Journal of Hydrogen Energy, 41, 10037-10043, 2016. https://doi.org/10.1016/j.ijhydene.2015.12.203
CR  - C. Timurkutluk, K. Bilgil, A. Celen, S. Onbilgin, T. Altan and U. Aydin, Experimental investigation on the effect of anode functional layer on the performance of anode supported micro-tubular SOFCs, International Journal of Hydrogen Energy, https://doi.org/ 10.1016/j.ijhydene.2021.09.260
CR  - S. Onbilgin, B. Timurkutluk, C. Timurkutluk and S. Celik, Comparison of electrolyte fabrication techniques on the performance of anode supported solid oxide fuel cells, International Journal of Hydrogen Energy, 45, 35162-35170, 2020. https://doi.org/10.1016/j.ijhydene. 2020.01.097
CR  - R.Z. Liu, S.R. Wang, B. Huang, C.H. Zhao, J.L. Li, Z.R. Wang, Z.Y. Wen and T.L. Wen, Dip-coating and co-sintering technologies for fabricating tubular solid oxide fuel cells, Journal of Solid State Electrochemistry, 13, 1905-1911, 2009. https://doi.org/ 10. 1007/s10008-008-0752-7
CR  - L. Lei, Y. Bai, Y. Liu and J. Liu, An investigation on dip-coating techniques for fabricating anode-supported solid oxide fuel cells, International Journal of Applied Ceramic Technology, 12 (2), 351-357, 2015. https://doi.org/10.1111/ijac.12147
CR  - C. Timurkutluk, B. Timurkutluk and Y. Kaplan, Experimental optimization of the fabrication parameters for anode-supported micro-tubular solid oxide fuel cells, International Journal of Hydrogen Energy 45, 23294-23309, 2020. https://doi.org/ 10.1016/j.ijhydene.2020.06.060
CR  - R. De la Torre Garcia, Production of micro-tubular solid oxide fuel cells. PhD Thesis, University of Trento, Trento, Italy, 2011.
CR  - Z. Hu, Y. Yang, Q. Chang, F. Liu, Y. Wang and J. Rao, Preparation of a high-performance ceramic membrane by a two-step coating method and one-step sintering, Applied Sciences, 9, 52-63, 2019. https://doi. org/10.3390/app9010052
CR  - X. Li, H. Zhong, J. Zhang, Y. Duan, H. Bai and J. Li, D. Jiang, Dispersion and properties of zirconia suspensions for stereolithography, International Journal of Applied Ceramic Technology, 00, 1-9, 2019. https://doi.org/10.1111/ijac.13321
CR  - A. De La Rosa, G. Ruiz, E. Castillo and R. Moreno, Calculation of dynamic viscosity in concentrated cementitious suspensions: Probabilistic approximation and Bayesian analysis, Materials (Basel), 14(8), 1971-1998, 2021. https://doi.org/10.3390/ma14081971
CR  - A. Azzolini, V.M. Sglavo and J.A. Downs, Novel method for the identification of the maximum solid loading suitable for optimal extrusion of ceramic pastes, Journal of Advanced Ceramics, 3(1), 7-16, 2014. https://doi.org/10.1007/s40145-014-0088-y
CR  - L.F.G. Setz, L. Koshimizu, S.R.H. Mello-Castanho and M.R. Morelli, Rheological analysis of ceramics suspensions with high solid loadings, Materials Science Forum, 727-728, 646-651, 2012. https://doi.org/ 10.4028/www.scientific.net/MSF.727-728.646
CR  - P.K. Senapati, D. Panda and A. Parida, Predicting viscosity of limestone-water slurry, Journal of Minerals and Materials Characterization and Engineering, 8(3), 203-221, 2009. https://doi.org/10.4236/JMMCE. 2009.83018
CR  - B. PFG, Concentration effects in the rheology of cement pastes: Krieger-Dougherty revisited. Proceedings of 13th International Congress on the Chemistry of Cement, Madrid, Spain, 2011.
UR  - https://doi.org/10.28948/ngumuh.1096585
L1  - https://dergipark.org.tr/tr/download/article-file/2345256
ER  -