@article{article_1460609, title={Investigation Of Induction Sinterability Of Powder Metal Parts Of Different Shapes And Sizes}, journal={Mühendis ve Makina}, pages={23–38}, year={2025}, DOI={10.46399/muhendismakina.1460609}, author={Çivi, Can and Atik, Enver}, keywords={Toz Metalurjisi, Sinterleme, İndüksiyon Sinterleme, Konvansiyonel Sinterleme}, abstract={Powder metal parts are used in many applications because of widely advantages. Induction sintering is a rapid sintering method, and it is moving towards to an important alternative process of conventional sintering by means of time and energy saving and more improved mechanical properties. In this study, five different samples were pressed with dual axis press under 600-800 MPa pressure. The samples were sintered with conventionally and with medium frequency (30 kHz) induction sintering mechanism. The body of the samples was heated directly by induction sintering. Comparison of the mechanical properties and microstructures of samples which produced by conventional and induction sintering methods were carried out. As a result of study, it was observed that induction sintering is more effective process in order to obtain acceptable mechanical properties than conventional sintering. Also, similar microstructural characteristics were obtained in shorter treatment times by induction sintering.}, number={718}, publisher={TMMOB Makina Mühendisleri Odası}