TY  - JOUR
T1  - Ni-Co-Ta-W-B metalik cam alaşımının metal matrisli kompozit üretiminde kullanım potansiyelinin arttırılması için camlaşma kabiliyetinin geliştirilmesi
TT  - Enhancing the glass-forming ability of Ni-Co-Ta-W-B metallic glass alloy to increase its potential use in metal matrix composite production
AU  - Şahin, Hakan
AU  - Hitit, Aytekin
PY  - 2025
DA  - April
Y2  - 2025
DO  - 10.30728/boron.1573965
JF  - Journal of Boron
PB  - TENMAK Bor Araştırma Enstitüsü
WT  - DergiPark
SN  - 2149-9020
SP  - 35
EP  - 42
VL  - 10
IS  - 1
LA  - tr
AB  - Bu çalışmada, B açısından zengin Ni-Co-W-B metalik cam alaşımı ailesinin cam oluşturma yeteneği Fe ve Cr ilavesiyle arttırılmıştır. Bu alaşım ailesi, yüksek tokluk ve sertliğe sahip metal matrisli kompozit (MMC) malzemelerin üretiminde öncü olarak hizmet edebilecek umut verici bir malzeme grubunu temsil etmektedir. Alaşım ailesinin kristalleşmesi sonucunda yüksek tokluk sağlayabilen bir Ni katı çözeltisi ve çok yüksek sertliğe sahip bir borür fazı (CoWB) oluşmaktadır. Yüksek kristalleşme sıcaklığına sahip dökme metalik camlardan biri olan Ni31,56Co21,74B15W23,7Ta8 alaşımının cam oluşturma yeteneği, termal özellikleri ve mikrosertlik özellikleri Fe ve Cr elementleri eklenerek incelenmiştir. Alaşımların yapısal ve termal özellikleri X-ışını kırınımı (XRD), diferansiyel taramalı kalorimetri (DSC), Vickers mikrosertliği ve taramalı elektron mikroskobu (SEM) analizleri kullanılarak araştırılmıştır. Analizler, Cr ilavesinin alaşımdaki kristalleşmeyi arttırdığını, dolayısıyla cam oluşturma yeteneğini olumsuz yönde etkilediğini ortaya çıkarmıştır. Buna karşılık, Fe'nin belirli seviyelerde eklenmesinin alaşımın cam oluşturma yeteneğini artırabileceği belirlenmiştir. Ni21,5Co21,5Fe10,3B15W23,7Ta8 alaşımı, 747°C'de ölçülen kristalizasyon sıcaklığı (Tx) ile 1 mm'lik kritik döküm kalınlığı sergilemiştir. Mikro sertlik ölçümleri alaşımın sertliğinin 1253 HV olduğunu ortaya çıkarmıştır. Uygun miktarlarda Fe eklenmesinin cam oluşturma yeteneğini artırabileceği, Cr eklenmesinin ise cam oluşturma eğilimini olumsuz yönde etkilediği gösterilmiştir.
KW  - Cam oluşturma kabiliyeti
KW  - Co-W-B fazı
KW  - İri hacimli metalik cam
KW  - mikrosertlik
KW  - termal özellikler
N2  - In this study, the glass-forming ability of the B-rich Ni-Co-W-B metallic glass alloy family has been enhanced through the addition of Fe and Cr. This alloy family represents a promising group of materials that can serve as precursors for producing metal matrix composite (MMC) materials with high toughness and hardness. As a result of the crystallization of the alloy family, a Ni solid solution that can provide high toughness and a boride phase (CoWB) with very high hardness is formed. The glass-forming ability, thermal properties, and microhardness characteristics of the Ni31.56Co21.74B15W23.7Ta8 alloy, one of the bulk metallic glasses with a high crystallization temperature, were investigated by adding Fe and Cr elements. The structural and thermal properties of the alloys were investigated using X-ray diffraction (XRD), differential scanning calorimetry (DSC), Vickers microhardness, and scanning electron microscopy (SEM) analyses. The analyses revealed that the addition of Cr increases crystallization in the alloy, thereby negatively impacting its glass-forming ability. In contrast, it was determined that incorporating Fe at certain levels can enhance the glass-forming ability of the alloy. The Ni21.5Co21.5Fe10.3B15W23.7Ta8 alloy exhibited a critical casting thickness of 1 mm, with a crystallization temperature (Tx) measured at 747°C. Micro-hardness measurements revealed that the hardness of the alloy is 1253 HV. It has been demonstrated that adding Fe in appropriate amounts can enhance the glass-forming ability, whereas the addition of Cr adversely affects the glass-forming tendency.
CR  - [1] Klement Jun, W., Willens, R. H., & Duwez, P. (1960). Non-crystalline structure in solidified gold-silicon alloys. Nature, 187, 869-870. https://doi.org/10.1038/187869b0
CR  - [2] Inoue, A., & Takeuchi, A. (2011). Recent development and application products of bulk glassy alloys. Acta Materialia, 59(6), 2243-2267. https://doi.org/10.1016/j.actamat.2010.11.027
CR  - [3] Hofmann, D. C., Andersen, L. M., Kolodziejska J., Roberts, S. N., Borgonia, J. P., Johnson, W. L., … & Kennett, A. (2016). Optimizing bulk metallic glasses for robust, highly wear-resistant gears. Advanced Engineering Materials, 19(1), 1600541. https://doi.org/10.1002/adem.201600541
CR  - [4] Telford, M. (2004). The case for bulk metallic glass. Materials Today, 7(3), 36-43. https://doi.org/10.1016/S1369-7021(04)00124-5
CR  - [5] Laghari, R. A., Jamil, M., Laghari, A. A., & Khan, A. M. (2025). Material characteristics and machinability of metal matrix composite materials: A critical review on recent advances and future perspectives. Measurement, 242, Part B, 115839. https://doi.org/10.1016/j.measurement.2024.115839
CR  - [6] Biyik, S. (2019). Effect of cubic and hexagonal boron nitride additions on the synthesis of Ag-SnO2 electrical contact material. Journal of Nanoelectronics and Optoelectronics. 14(7), 1010-1015. https://doi.org/10.1166/jno.2019.2592
CR  - [7] Subramanian, J., Seetharaman, S., & Gupta, M. (2015). Processing and properties of aluminum and magnesium based composites containing amorphous reinforcement: A review. Metals, 5, 743-762. https://doi.10.3390/met5020743
CR  - [8] Hufenbach, W., Andrich, M., Langkamp, A., & Czulak, A. (2006). Fabrication technology and material characterization of carbon fibre reinforced magnesium. Journal of Materials Processing Technology, 175, 218-224. https://doi.10.1016/j.jmatprotec.2005.04.023
CR  - [9] Hitit, A., Yazici, Z. O., Sahin, H., Ozturk, P., Asgin, A.M., & Hitit, B. (2019). A novel Ni-based bulk metallic glass containing high amount of tungsten and boron. Journal of Alloys and Compounds, 807, 151661. https://doi.org/10.1016/j.jallcom.2019.151661
CR  - [10] Hitit, A., Yazici, Z. O., Ozturk, P., Sahin, H. Asgin, A. M. & Hitit, B. (2021). A Ni-CoWB composite developed by devitrification of Ni-Co-W-B bulk metallic glass. Materials Science & Engineering, 803, 140479. https://doi.org/10.1016/j.msea.2020.140479
CR  - [11] Zakhariev, Z., Zlateva, R. & Petrov, K. (1986). Microhardness and high-temperature oxidation stability of CoWB. Journal of the Less Common Metals, 117, 129-133. https://doi.org/10.1016/0022-5088(86)90021-4
CR  - [12] List, A., Gartner, F. Schmidt, T. & Klassen, T. (2012). Impact conditions for cold spraying of hard metallic glasses. Journal of Thermal Spray Technology, 21, 531-540. https://doi.10.1007/s11666-012-9750-5
CR  - [13] Nayak, S. K., Kumar, A., & Laha, T. (2022). Developing an economical wear and corrosion resistant febased metallic glass composite coating by plasma and HVOF Spraying. Journal of Thermal Spray Technology, 31, 1317-1329. https://doi.org/10.1007/s11666-021-01277-w
CR  - [14] Zhao, Z., Yang, G., & Zhao, K. (2022). 3D printing of Mg-based bulk metallic glasses with proper laser power and scanning speed. Metals, 12, 1318. https://doi.org/10.3390/met12081318
CR  - [15] Badoniya, P., Srivastava, M., Jain, P. K., & Rathee, S. (2024). A state of the art review on metal additive manufacturing: Milestones, trends, challenges and perspectives. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46, 339 https://doi.org/10.1007/s40430-024-04917-8
CR  - [16] Sohrabi, N., Jhabvala, J., & Loge, R. E. (2021). Additive manufacturing of bulk metallic glasses-Process, challenges and properties: A review. Metals, 11(8), 1279. https://doi.org/10.3390/met11081279
CR  - [17] Madge, S. V., & Greer, A. L. (2021). Laser additive manufacturing of metallic glasses: Issues in vitrification and mechanical properties. Oxford Open Materials Science, 1(1), itab015. https://doi.org/10.1093/oxfmat/itab015
CR  - [18] Hoff, A. (2018). Understanding the origin of glass forming ability in metallic glasses. [Doctoral dissertation, California Institute of Technology] Pasadena, California. https://doi.org/10.7907/Z7Y5-0B62
CR  - [19] Lu, Z. P, Li, Y., & Ng, S. C. (2000). Reduced glass transition temperature and glass forming ability of bulk glass forming alloys. Journal of Non-Crystalline Solids, 270(1-3), 103-114. https://doi.org/10.1016/S0022-3093(00)00064-8
CR  - [20] Lu, Z. P., & Liu, C. T. (2002). A new glass-forming ability criterion for bulk metallic glasses. Acta Materialia, 50(13), 3501-3512. https://doi.org/10.1016/S1359-6454(02)00166-0
CR  - [21] Hitit, A., Yazici, Z. O., Öztürk, P., Eryesil, B., Barut, N., & Sahin H. (2021). The effects of tantalum addition on the glass forming ability, thermal stability, and mechanical properties of Ni-Co-W-B bulk metallic glasses. Journal of Non-Crystalline Solids, 572, 121089. https://doi.org/10.1016/j.jnoncrysol.2021.121089
CR  - [22] Yazıcı, Z. O. (2020). Effect of vacuum conditions on stability and crystallization of cobalt based amorphous alloy. Materials Science-Poland, 38(1), 181-188. https://doi.org/10.2478/msp-2020-0003
CR  - [23] Sun, Y., Wang, Y., Zhang, J., Li, R., Guo, L., Xu, H., & Wang, W. (2015). Effect of casting vacuum on thermodynamic and corrosion properties of Fe-based glassy alloy. Transactions of Nonferrous Metals Society of China, 25(3), 844−849. https://doi.org/10.1016/S1003-6326(15)63672-X
CR  - [24] Igel, J., Kirk, D. W., Singh, C. V., & Thorpe, S.J. (2015). A practical investigation of the production of Zr-Cu-Al-Ni bulk metallic glasses by arc melting and suction casting. Materials Transactions, 56(11), 1834-1841. https://doi.org/10.2320/matertrans.M2015235
UR  - https://doi.org/10.30728/boron.1573965
L1  - https://dergipark.org.tr/tr/download/article-file/4316817
ER  -