TY  - JOUR
T1  - Investigation of the effects of hot dip aluminizing and diffusion annealing on microstructural and tribological properties of dual phase (DP800) steels
TT  - Sıcak daldırma alüminyumlama ve difüzyon tavlaması işleminin çift fazlı (DP800) çeliklerin mikroyapısal ve tribolojik özelliklerine etkilerinin incelenmesi
AU  - Yürektürk, Yakup
AU  - Çeltik, Cansu
PY  - 2024
DA  - November
JF  - Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi
PB  - Pamukkale Üniversitesi
WT  - DergiPark
SN  - 2147-5881
SP  - 737
EP  - 741
VL  - 30
IS  - 6
LA  - en
AB  - In this study, the effects of hot dip aluminizing (HDA) (90 s at 725°C)and diffusion annealing on the microstructural and tribologicalproperties of DP800 steel were investigated. After HDA treatment, oneof the sample was left to cool in air (HDA-1) and the other one left tocool in air after being subjected to a diffusion annealing for 1 hour in anoven set at 300°C (HDA-2). Evolution in mechanical and tribologicalproperties depending on the developments in the coatingmicrostructure investigated in terms of hardness and wear behaviour,respectively. Mechanical characterization results show that diffusionannealing increases the hardness value of hot dip aluminized steel to1100 HV values. Considering the wear ball volume and frictioncoefficients, the most advanced tribological properties were observed inthe diffusion-annealed HDA process (HDA-2).
KW  - DP800 steel
KW  - Hot dip aluminizing
KW  - Diffusion annealing
KW  - Wear
N2  - Bu çalışmada, sıcak daldırmalı alüminyumlama (HDA) (725°C'de90 sn.) ve difüzyon tavlaması işleminin DP800 çeliğinin mikroyapısal vetribolojik özellikleri üzerindeki etkileri incelenmiştir. HDA işlemindensonra numunelerden biri havada (HDA-1), diğeri ise 300°C'yeayarlanmış fırında (HDA-2) 1 saat difüzyon tavlaması işlemine tabitutularak havada soğumaya bırakılmıştır. Kaplama mikroyapısındakidönüşüme bağlı olarak değişen mekanik ve tribolojik özellikler sırasıylasertlik ve aşınma davranışı bakımından incelenmiştir. Mekanikkarakterizasyon sonuçları, difüzyon tavlaması işleminin sıcak daldırmaalüminize çeliğin sertlik değerini 1100 HV değerlerine çıkardığınıgöstermektedir. Aşınan bilye hacmi ve sürtünme katsayıları dikkatealındığında en gelişmiş tribolojik özellikler difüzyon tavlaması işlemigörmüş HDA prosesinde (HDA-2) gözlenmiştir.
CR  - [1] Tzormpatzidi V, Fourlaris G. “Microstructure-mechanical property relationships during processing of experimental dual phase (DP800) and TRIP 600 strip steels”. Microscopy and Microanalysis, 12(2), 1036-1037, 2006.
CR  - [2] Darabi ACh, Chamani HR, Kadkhodapour J, Anaraki AP, Alaie A, Ayatollahi MR. “Micromechanical analysis of two heat-treated dual phase steels: DP800 and DP980”. Mechanics of Materials, 110, 68-83, 2017.
CR  - [3] Tian C, Ponge D, Christiansen L, Kirchlechner C. “On the mechanical heterogeneity in dual phase steel grades: Activation of slip systems and deformation of martensite in DP800”. Acta Materialia, 183, 274-284, 2020.
CR  - [4] Song GM, Vystavel T, Van Der Pers N, de Hosson J TM, Sloof WG. “Relation between microstructure and adhesion of hot dip galvanized zinc coatings on dual phase steel”. Acta Materialia, 60(6-7), 2973-2981, 2012.
CR  - [5] Sabooni S, Galinmoghaddam E, Ahmadi M, Westerwaal RJ, Langkruis J, Zoestbergen E, de Hosson JTM, Pei YT. “Microstructure and adhesion strength quantification of PVD bi-layered ZnMg-Zn coatings on DP800 steel”. Surface and Coating Technology, 359, 227-238, 2019.
CR  - [6] Chovet C, Guiheux S. “Possibilities offered by MIG and TIG brazing of galvanized ultra high strength steels for automotive applications”. la Metallurgia Italiana, 47-53, 2006.
CR  - [7] Li X, Lawson S, Zhou Y, Goodwin F. “Novel technique for laser lap welding of zinc coated sheet steels”. Journal of Laser Applications, 19(4), 259-264, 2007.
CR  - [8] Shehryar Khan M, Cho YH, Alfano M, Goodwin F, Biro E, Zhou Y. “A systematic study on the effect of coating type and surface preparation on the wettability of Si-Bronze brazing filler material on GI and GA-coated DP600”. Surface and Coating Technology, 425, 1-16, 2021.
CR  - [9] Cho L, Kang H, Lee C, de Cooman BC. “Microstructure of liquid metal embrittlement cracks on Zn-coated 22MnB5 press-hardened steel”. Scripta Materiala, 90-91, 25-28, 2014.
CR  - [10] Kang H, Cho L, Lee C, De Cooman BC. “Zn penetration in liquid metal embrittled steel”. Metallurgical and Materials Transactions A, 47(6), 2885-2905, 2016.
CR  - [11] Takata N, Tsukahara T, Kobayashi S, Takeyama M. “Microstructure control of dual-phase steels through HotDip Al-Mg-Si alloy coating process”. ISIJ International, 56(2), 319-325, 2016.
CR  - [12] Dede A. DP-800 Kalite Çift Fazlı Çeliğin Sıcak Daldırma Yöntemi ile Alüminyum Kaplanması. Yüksek Lisans Tezi, İstanbul Teknik Üniversitesi, İstanbul, Türkiye, 2018.
CR  - [13] Samsu Z, Othman NK, Daud AR, Hussein H. “Morphological and microstructural studies on aluminizing coating of carbon steel”. AIP Conference Proceedings, 1571(1), 141-145, 2013.
CR  - [14] Huilgol P, Rajendra Udupa K, Udaya Bhat K. “Formation of microstructural features in hot-dip aluminized AISI 321 stainless steel”. International Journal of Minerals, Metallurgy and Materials, 25(2), 190-198, 2018.
CR  - [15] Kobayashi S, Yakou T. “Control of intermetallic compound layers at interface between steel and aluminum by diffusion-treatment”. Materials Science and Engineering: A, (338)(1-2), 44-53, 2002.
CR  - [16] Amanov A, Pyun YS, Kim JH, Sasaki S. “The usability and preliminary effectiveness of ultrasonic nanocrystalline surface modification technique on surface properties of silicon carbide”. Applied Surface Science, 311, 448-460, 2014.
CR  - [17] Yeremenko VN, Natanzon YV, Dybkov VI. “The effect of dissolution on the growth of the Fe2Al5 interlayer in the solid iron-liquid aluminium system”. Journal of Material Science, 16(7), 1748-1756, 1981.
CR  - [18] Kang S, Han K, Kim K, Kang Y, Son K, Kim D. “Formation behavior of an ıntermetallic compound layer during the hot dip aluminizing of cast ıron”. ISIJ International, 52(7), 1342-1347, 2012.
CR  - [19] Liang HC, Wang CJ. “The hot corrosion resistance of hotdip aluminized low carbon steel with nickel interlayer under static load”. Surface and Coating Technology, 350, 496-501, 2018.
CR  - [20] Dey PP, Modak P, Banerjee PS, Chakrabarti D, Seikh AH, Abdo HS, Luqman M, Ghosh M. “Studies on the characterization and morphological features of the coating on interstitial free steel dipped in molten Al-Si-Mg alloy at 800 °C”. Journal of Materials Research and Technology, 9(3), 4788-4805, 2020.
CR  - [21] Kishore K, Chhangani S, Prasad MJNV, Bhanumurthy K. “Microstructure evolution and hardness of hot dip aluminized coating on pure iron and EUROFER 97 steel: Effect of substrate chemistry and heat treatment”. Surface and Coating Technology, 409, 1-10, 2021.
CR  - [22] Ghahramanzadeh Asl H, Sert Y, Bayrak Ö, Küçükömeroğlu T. “Investigation of the friction and wear properties of nitrided 7075-T6 luminum alloy under vacuum and ambient air”. Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi, 28(1), 63-71, 2022.
UR  - https://dergipark.org.tr/tr/pub/pajes/article/1591275
L1  - https://dergipark.org.tr/tr/download/article-file/4393543
ER  -