TY  - JOUR
T1  - Effect of Basis Weight on Paper Properties of Scots Pine and European Black Pine Kraft Pulp
TT  - Sarıçam ve Karaçam Kraft Kağıt Hamurunun Kağıt Özellikleri Üzerine Gramajın Etkisi
AU  - Gülsoy, Sezgin Koray
PY  - 2025
DA  - August
Y2  - 2025
DO  - 10.24011/barofd.1696734
JF  - Bartın Orman Fakültesi Dergisi
PB  - Bartın Üniversitesi
WT  - DergiPark
SN  - 1302-0943
SP  - 291
EP  - 302
VL  - 27
IS  - 2
LA  - en
AB  - The physical, optical, and mechanical characteristics of handsheets made from kraft pulps of Scots pine (Pinus sylvestris L.) and European black pine (Pinus nigra Arn.) in basis weight ranging from 50 to 125 g/m2 (15 g/m2 intervals) were assessed in this study. The thickness, bulk, apparent density, opacity, burst strength, tear strength, tensile strength, stretch and tensile energy absorption (TEA) properties of papers obtained in different grammages were evaluated. The results showed that basis weight of handsheets had a significant effect of examined properties of handsheets. In both pulp samples, when the handsheet basis weight increased, the tensile strength, burst strength, tear strength, apparent density and opacity of the handsheets increased while bulk decreased. In all basis weight values, Scots pine handsheets had higher tensile and burst strengths, opacity, and apparent density than those of European black pine handsheets. Therefore, Scots pine pulps can be more suited for packaging purposes. This study shows that kraft pulps obtained from different wood species can be optimized and desired paper properties can be achieved by appropriate basis weight selections.
KW  - Scots pine
KW  - European black pine
KW  - basis weight
KW  - kraft pulp
KW  - paper properties
N2  - Bu çalışmada, sarıçam (Pinus sylvestris L.) ve karaçam (Pinus nigra Arn.) kraft hamurlarından 50 ile 125 g/m2 (15 g/m2 aralıklı) gramajda üretilen deneme kağıtlarının fiziksel, optik ve mekanik özellikleri değerlendirilmiştir. Farklı gramajlarda elde edilen kağıtların kalınlık, hacimlilik, yoğunluk, opaklık, patlama sağlamlığı, yırtılma sağlamlığı, kopma sağlamlığı, uzama ve kopma enerji absorpsiyonu özellikleri değerlendirilmiştir. Sonuçlar, deneme kağıtlarının gramajının incelenen kağıt özellikleri üzerinde önemli bir etkiye sahip olduğunu göstermiştir. Her iki kağıt hamuru örneğinde de, deneme kağıdı gramajı arttıkça, kağıtların kopma sağlamlığı, patlama sağlamlığı, yırtılma sağlamlığı, yoğunluk ve opaklığı artarken hacimliliği azalmıştır. Tüm gramaj değerlerinde, sarıçam deneme kağıtlarının kopma ve patlama sağlamlıkları, opaklığı ve yoğunluğu karaçam deneme kağıtlarına göre daha yüksektir. Bu yüzden, sarıçam kraft kağıtları paketleme amaçları için daha uygun olabilir. Bu çalışma, farklı ağaç türlerinden elde edilen kraft hamurlarının optimize edilebileceğini ve uygun gramaj seçimleri ile istenilen kağıt özelliklerine ulaşılabileceğini göstermektedir.
CR  - Bloch, J. F., Engin, M., & Sampson, W. W. (2019). Grammage dependence of paper thickness. Appita Journal, 72(1), 30-40.
CR  - Brandon, C. E. (1966). Effect of basis weight on folding endurance. Tappi Journal, 49, 233-235.
CR  - Brännvall, E., & Annergren, G. (2009). Pulp Characterization, Chapter 16. In: Ek, M., Gellerstedt, G., Henriksson, G. (Eds.). Pulp and Paper Chemistry and Technology Volume 2. Berlin: Walter de Gruyter, pp. 429-459.  https://doi.org/10.1515/9783110213423
CR  - Burgess, W. H. (1970). Effect of basis weight on tensile strength. Tappi Journal, 53, 1680-1682.
CR  - Engin, M., Sönmez, S., & Kurt, M. B. (2023). An investigation of the tensile characteristics of printed handsheets. Pigment & Resin Technology, 52(1), 105-115. https://doi.org/10.1108/PRT-09-2021-0111
CR  - Girlanda, O., Fellers, C. (2007). Evaluation of the tensile stress-strain properties in the thickness direction of paper materials. Nordic Pulp and Paper Research, 22, 49-56. https://doi.org/10.3183/npprj-2007-22-01-p049-056
CR  - Gulsoy, S. K., & Eroglu, H. (2011). Influence of sodium borohydride on kraft pulping of European black pine as a digester additive. Industrial & Engineering Chemistry Research, 50(4), 2441-2444. https://doi.org/10.1021/ie101999p
CR  - Gulsoy, S. K., Kustas, S., & Erenturk, S. (2013). The effect of old corrugated container (OCC) pulp addition on the properties of paper made with virgin softwood kraft pulps. BioResources 8(4), 5842-5849. https://doi.org/10.15376/biores.8.4.5842-5849
CR  - Gulsoy, S. K., & Ozturk, F. (2015). Kraft pulping properties of European black pine cone. Maderas. Ciencia y Tecnología, 17(4), 875-882. http://dx.doi.org/10.4067/S0718-221X2015005000076
CR  - Gülsoy, S. K. (2023). Comparison of kraft and ternary deep eutectic solvent pulping of scots pine. Industrial Crops and Products, 206, 117596. https://doi.org/10.1016/j.indcrop.2023.117596
CR  - Gülsoy, S. K. (2024a). Chemical composition and Fiber Properties of Scots Pine: A Literature Review.  Bölüm 4. In: Orman Endüstri Mühendisliği Alanında Araştırma ve Değerlendirmeler, Aralık 2024. Gece Kitaplığı Yayınevi, 49-67 s.
CR  - Gülsoy, S. K. (2024b). Chemical composition and Fiber Properties of European Black Pine: A Literature Review.  Chapter 3. In: International Studies and Evaluations in the Field of Forestry and Forest Engineering - December 2024. Serüven Yayınevi, 31-45 s.
CR  - Gülsoy, S., Hürfikir, Z., & Turgut, B. (2016). Effects of decreasing grammage on the handsheet properties of unbeaten and beaten kraft pulps. Turkish Journal of Forestry, 17(1), 56-60. https://doi.org/10.18182/tjf.15900
CR  - Gülsoy, S., & Șimșir, S. (2017). The effect of handsheet grammage on strength properties of test liner papers. Journal of Bartin Faculty of Forestry, 19(1): 117-122. https://doi.org/10.24011/barofd.295319
CR  - Honkasalo, J. (2004). Behaviour of different furnish mixtures in mechanical printing papers. Espoo: Helsinki University of Technology, Laboratory of Paper Technology Reports Series A22.
CR  - I'Anson, S. J., Sampson, W. W., Sevajee, C. R. (2007). New perspectives on the influence of formation and grammage on sheet strength. In: 93rd annual meeting-pulp and paper technical association of Canada, Montreal, pp.141-144.
CR  - I'Anson, S. J., Sampson, W. W. (2007). Competing Weibull and stress-transfer influences on the specific tensile strength of a bonded fibrous network. Composites Science and Technology, 67: 1650-1658. https://doi.org/10.1016/j.compscitech.2006.07.002
CR  - I'Anson, S. J., Sampson, W. W., Savani, S. (2008). Density dependent influence of grammage on tensile properties of handsheets. Journal of Pulp and Paper Science, 34, 182-189.
CR  - İstek, A., Eroğlu, H., & Gülsoy, S. K. (2008). Karaçamın yaşına bağlı olarak lif ve kağıt özelliklerinin değişimi. Kastamonu University Journal of Forestry Faculty, 8(1), 61-66.
CR  - İstek, A., Gülsoy, S. K., & Eroğlu, H. (2010). Karaçam öz odunu ve diri odunu lifsel özelliklerinin karşılaştırılması, III. Ulusal Karadeniz Ormancılık Kongresi, 5, 1916-1924.
CR  - Joutsimo, O., Wathén, R., & Tamminen, T. (2005). Effects of fiber deformations on pulp sheet properties and fiber strength. Paperi Ja Puu, 87(6), 392-407.
CR  - Kılıç Pekgözlü, A., Gülsoy, S. K., & Ayçiçek, Y. (2017). Effect of stem height on the fiber morphology and chemical composition of European black pine (Pinus nigra Arnold.). Bartın Orman Fakültesi Dergisi, 19(2), 74-81. https://doi.org/10.24011/barofd.342069
CR  - Köksal, S. E., & Kılıç Pekgözlü, A. (2016). Sarıçam (Pinus sylvetris L), karaçam (Pinus nigra Arnold.) ve kızılçam (Pinus brutia Ten.) basınç odununun mikroskobik yapısı. Düzce Üniversitesi Orman Fakültesi Ormancılık Dergisi, 12(1), 72-82.
CR  - Kuştaş, S., & Gülsoy, S.K. (2023). Boron compounds-added kraft pulping from Scots pine. Drvna industrija, 74(1), 43-52. https://doi.org/10.5552/drvind.2023.0014
CR  - Mohlin, U. B. (1992). Influence of grammage on sheet strength properties. In: Paper Physics Seminar Proceedings, Otaniemi, pp.1-12.
CR  - Nordstrom, B. (2003). Effects of grammage on sheet properties in one-sided and two-sided roll forming. Nordic Pulp and Paper Research, 18, 280-287.  https://doi.org/10.3183/npprj-2003-18-03-p280-287
CR  - Nordstrom, B., Norman, B. (1996). Effects of grammage on paper properties for twin-wire roll forming of TMP. Journal of Pulp Paper Science, 21, J427-J431.
CR  - Retulainen, E., Nieminen, K. (1996). Fibre properties as control variables in papermaking. Part 2. Strengthening interfibre bonds and reducing grammage. Paperi Ja Puu Paper and Timber, 78, 305-312.
CR  - Sakare, P., Bharimalla, A. K., Dhakane-Lad, J., & Patil, P. G. (2021). Development of greaseproof paper from banana pseudostem fiber for packaging of butter. Journal of Natural Fibers, 18(12), 1974-1982. https://doi.org/10.1080/15440478.2019.1710652
CR  - Seth, R. S., Jantunen, J. T., Moss, C. S. (1989). The effect of grammage on sheet properties. Appita Journal, 42, 42-48.
CR  - Sonmez, S., Engin, M., Li, K., & Salam, A. (2024). Analysing the impact of paper grammage and pulp blend on electrophotographic printing systems. Coloration Technology, 140(5), 793-804. https://doi.org/10.1111/cote.12738
 
Yaman, B. (2007). Comparative wood anatomy of Pinus sylvestris and its var. compacta in the West Black Sea Region of Turkey. IAWA Journal, 28(1), 75-82.
UR  - https://doi.org/10.24011/barofd.1696734
L1  - https://dergipark.org.tr/tr/download/article-file/4858473
ER  -