TY  - JOUR
T1  - Evaluation of Mechanical Properties of S355J2C and HBW450 Materials Joined by MAG Welding Method Using Different Welding Groove Geometries
TT  - Farklı Kaynak Ağzı Geometrileri Kullanılarak MAG Kaynak Yöntemiyle Birleştirilen S355J2C ve HBW450 Malzemelerin Mekanik Özelliklerinin Değerlendirilmesi
AU  - Durgutlu, Ahmet
AU  - Ayyıldız, Eren Anıl
AU  - Yıldırım, Mehmet Serkan
PY  - 2025
DA  - August
Y2  - 2025
DO  - 10.52795/mateca.1734912
JF  - Manufacturing Technologies and Applications
JO  - MATECA
PB  - Mustafa GÜNAY
WT  - DergiPark
SN  - 2717-7475
SP  - 239
EP  - 247
VL  - 6
IS  - 2
LA  - en
AB  - In this study, S355J2C and Hardox (HBW450) sheets, which are used extensively in the manufacturing sector, were joined using the robotic MAG welding method by opening the V and X weld groove. Three different variable welding speeds were used in the joints, while other welding parameters were fixed. Microstructural examinations and mechanical tests were carried out on the welded materials produced. The microstructural examinations clearly showed the transition from the base metal to the weld metal and the formation of grains with dendritic structures directed towards the weld centre. The investigations showed that there was a relationship between welding speed and heat input and that hardness and tensile values increased with increasing welding speed. In the microhardness measurements, the lowest hardness values of all the test specimens were measured from the S355J2C base material. It was found that the hardness value of the weld metal was higher than the S355J2C base material and lower than the HBW450 base material, which would be the average of the hardness values of the two materials used. In addition, in the tensile tests, all the specimens failed from the S355J2C base material. As a result of the tests carried out, it was found that the different weld groove geometries did not play a very effective role in the mechanical values of the joints or the resulting microstructure.
KW  - s355jc2
KW  - hardox
KW  - MAG welding
KW  - HBW450
N2  - Bu çalışmada, imalat sektöründe yoğun olarak kullanılan S355J2C ve Hardox (HBW450) levhalar V ve X kaynak ağızları açılarak robotik MAG kaynak yöntemi kullanılarak birleştirilmiştir. Birleştirmelerde diğer kaynak parametrelerinin sabit olduğu değişken 3 farklı kaynak hızı kullanılmıştır. Üretilen kaynaklı malzemelere mikroyapı incelemeleri ve mekanik testler uygulanmıştır. Mikroyapı incelemelerinde ana metallerden kaynak metaline geçiş net olarak görülmüş ve kaynak merkezine doğru yönlenmiş dendritik yapı içeren tanelerin oluştuğu tespit edilmiştir. Yapılan incelemeler sonrasında kaynak hızı ile ısı girdisi arasında bir ilişki olduğu artan kaynak hızı ile birlikte sertlik ve çekme değerlerinin de artış gösterdiği belirlenmiştir. Mikrosertlik ölçümlerinde tüm deney numunelerinde en düşük sertlik değerleri S355J2C ana malzemeden ölçülmüştür. Kaynak metalinin sertlik değeri kullanılan her iki malzemenin sertlik değerlerinin ortalaması olacak şekilde S355J2C ana malzemeden yüksek HBW450 ana malzemeden ise düşük olduğu belirlenmiştir. Ayrıca yapılan çekme testlerinde tüm numuneler S355J2C ana malzemeden kopmuştur. Uygulanan testler sonucunda farklı kaynak ağzı geometrilerinin birleştirmelerin mekanik değerleri üzerinde veya oluşan mikroyapıda fazlaca etkin bir rol oynamadığı tespit edilmiştir.
CR  - [1]	T. Canel, S. Ürgün, Using CO2 laser, optimization of laser power, exposure time and frequency for cavity formation on hardox steel plate, Natural & Applied Sciences Journal 6 (2) (2023) 31-40. https://doi.org/10.38061/idunas.1358218.
CR  - [2]	M. Altuğ, Investıgatıon of machınabılıty of welded joınted hardox steel in WEDM, Eskişehir Technıcal Unıversıty Journal of Scıence and Technology A- Applıed Scıences And Engıneerıng 2(1) (2019) 92-103. https://doi.org/10.18038/aubtda.439.
CR  - [3]	F. Çırakoğlu, Ö. Barış, H. Demir, Optimization of cutting parameters and ınvestigation of the effect of cutting parameters on hole quality in laser drilling of Hardox 450 steel, BSEU Journal of Science 8 (2) (2021) 913-923.  https://doi.org/10.35193/bseufbd.977412.
CR  - [4]	R. Kara, Y. Kayalı, F. Çola, Investigation of wear behavior of boronized Hardox 500 steels, BSEU Journal of Science 8(1) (2021) 151-158.  https://doi.org/10.35193/bseufbd.852948.
CR  - [5]	M.E. Kocadağistan, O. Çinar, Investigation of the weldability of AISI 430 and HARDOX 500 steels by CMT method, Pamukkale University Journal of Engineering Sciences 30(3) (2024) 293-301. https://doi.org/10.5505/pajes.2023.45020.
CR  - [6]	T. Teker, D. Gençdoğan, Phase and chemical structure characterization in double sided TIG arc welding of HARDOX 450 and AISI 430 steel, Cumhuriyet Science Journal,41(4) (2020) 987-994.  https://doi.org/10.17776/csj.742964.
CR  - [7]	Ş. Korkmaz, M.H. Çetin, M. Adar, A. Orak, Investigation of tensile strength and hardness behaviour of Hardox500 – St52 specimen joined by GMAW method, Konya Journal of Engineering Sciences 8(2) (2020) 300-317. https://doi.org/10.36306/konjes.610889.
CR  - [8]	İ. Kırık, Z. Balalan, Y. Andan, M. Yaz, St52 çeliğinin TIG kaynak yöntemi ile WC takviyeli tozla kaplanması, International Journal of Innovative Engineering Applications 3(1) (2019) 16-20.
CR  - [9]	R. Kaçar, H.E. Emre, A.Ü. İşineri, A. Najafigharehtapeh, Effects of welding methods on the mechanical properties of joining dissimilar steel couple, Journal of the Faculty of Engineering and Architecture of Gazi University, 33 (2018) 255-265. https://doi.org/10.17341/gazimmfd.406797.
CR  - [10]	V. Onar, Effect of different welding currents and speeds on microhardness of XAR 500 series steels in robotic MAG welding method, Duzce University Journal of Science and Technology 8 (2020) 1193-1203. https://doi.org/10.29130/dubited.646727.
CR  - [11]	E.T. Simsek, A. Akkuş, Investigation of the effect of protective gas composition on welding quality in MAG welding by tensile test, European Journal of Science and Technology 32 (2021) 531-535. https://doi.org/10.31590/ejosat.1040057.
CR  - [12]	C. Köse, Z. Tatlı, The effect of weldıng speed on the mechanıcal and mıcrostructure propertıes of robotıc GMAW welded 5754 alumınıum alloy, E-Journal of New World Sciences Academy 10 (2015) 1-12.  https://doi.org/10.12739/NWSA.2015.10.1.2A0089.
CR  - [13]	F. Yalçın, M.S.Yıldırım, Y. Kaya, Joining of pressure vessel steels using MAG welding method and ınvestigation of mechanical properties, Journal of Polytechnic 27(6) (2024) 2079-2092. https://doi.org/10.2339/politeknik.1385257.
CR  - [14]	I.A. İbrahim, S.A. Mohamat, A. Amir, A. Ghalib, The effect of gas metal arc welding (GMAW) processes on different welding parameters, International Symposium on Robotics and Intelligent Sensors, Malaysia, 2012: pp. 1502-1506.
CR  - [15]	T. Oktay, A. Najafigharehtapeh, H.E. Emre, R. Kaçar, Investıgatıon of the weldabılıty Of S235JR - Hardoks400 steel, The 2nd International Iron and Steel Symposium, Karabük, 2015: pp.426-434.
UR  - https://doi.org/10.52795/mateca.1734912
L1  - https://dergipark.org.tr/tr/download/article-file/5023326
ER  -