TY  - JOUR
TT  - Influence of the Die Geometry on Load and Metal Flow in Extrusion-Forging Processes
AU  - Altınbalık, Tahir
AU  - Çan, Yılmaz
PY  - 2016
DA  - August
JF  - Trakya Üniversitesi Fen Bilimleri Dergisi
JO  - Trakya Univ J Sci
PB  - Trakya Üniversitesi
WT  - DergiPark
SN  - 1305-6468
SP  - 1
EP  - 8
VL  - 10
IS  - 1
KW  - Ekstrüzyon Tipi Dövme
KW  - Geometrik Etki
KW  - Metal Akışı
N2  - Metal flow of extrusion-forging process is similar to that of the initial pre-forging of closed-die forging and the process is frequently preferred in the forming process of high strength parts. In many metal forming processes such as closed-die forging or extrusion/forging, the deforming material changes its flow direction at various stages during the forming operation. The extrusion-forging process consisted of three distinct metal flow stages. This complex flow mechanism makes the calculation of tool stresses and forming forces extremely difficult. Therefore investigating the influence of orifices profile in the lower die on metal flow will be beneficial. The aim of this study is to determine the shape of die profiles which have same cross section area but different geometry on metal flow and load requirement. Thus, experiments of extrusion-forging was done by using three different dies of which orifice shape are different and results are compared which each other. Experiments were carried out by using a hydraulic press of which capacity 150 metric tons and lead was chosen as experimental material
CR  - Kudo, H., Some Analytical Experimental Studies of Axisymmetric Cold Forging and Extrusion, Int. J. Mech. Sci., 1960; 2:71-117.
CR  - Rowe, G.W., Principles of Industrial Metalworking Processes, Arnold, London, 1997.
CR  - Jain, S.C., Bramley, A.N., Lee, C.H. and Kobayashi, S., Theory and Experiments in Extrusion Forging, Proc. 11th MTDR Conf. Birmingham, Sept.1970, 1097-1115.
CR  - Hu, W., Hashimi, M.S.J., Study of Metal Flow in Ekstrüzyon Forging of Rectangular Billets, J. Mat. Pro. Tech., 1994, 43:51-59.
CR  - Hashmi, M.S.J., Klemz, F.B., Axisymmetric Extrusion Forging: Effects of Material Property and Product Geometry, Int. J. Mach. Tool Des. Res. 1986, 26(2):157-170.
CR  - Giardini, C., Ceretti, E. and Maccarini, G., Formability in Extrusion Forging: The Influence of Die Geometry and Friction Conditions, J. Mat. Pro. Tech., 1995, 55:305-308.
CR  - Monaghan, J., Brayden, L., An Analysis of an Open and Closed-Die Extrusion Forging Process, Proc. IMC-5, Queens Univ. Belfast, 1988, 273-287.
CR  - Monaghan, J., Brayden, L., An Analysis of a Closed-Die Extrusion Forging Process, Proc. IMC-6, Dublin City Univ., 1989, 310-332.
CR  - Vickery, J., Monaghan, J., An Investigation of the Early Stages of a Forging Extrusion Process, Proc. IMC-8, Univ. Ulster, 1991, 327-342.
CR  - 0] Vickery, J., Monaghan, J., An Upper Bound Analysis of a Forging-Extrusion J. Mat. Pro. Tech., 1995, 55:103110.
CR  - 1] Hwang, B.C., Hong, S.J. and Bae, W.B., An UBET Analysis of Non-Axisymmetric Extrusion/Forging Process, J. Mat. Pro. Tech., 2001, 111:135-141.
CR  - 2] Wu, C.Y., Hsu, Y.C., The Influence of Die Shape on the Flow Deformation of Extrusion Forging, J. Mat. Pro. Tech., 2002, 124:67-76.
CR  - 3] Lin, S.Y., Lin, F.C., Influences of the Geometrical Conditions of die and Workpiece on the Barreling Formation During Forging-Extrusion Process, J. Mat. Pro. Tech., 2003, 140:54-58.
CR  - 4] Mısırlı, C., Çan, Y. ve Altınbalık, M.T., Ekstrüzyon Tipi Dövme Prosesi Üzerine Teorik Bir Çalışma, II. MBGAK, İstanbul, 17-19 Kasım 2005, 286-294.
CR  - 5] Narayanasamy, R., Baskaran, K., Arunachalam, S,, and Krishna, D.M., An Experimental Investigation on Barreling of Aluminium Alloy Billets during Extrusion Forging Using Different Lubrications, Mat&Des., 2008, 29:2076-2088.
UR  - http://dergipark.org.tr/tr/pub/trakyafbd/issue//246015
L1  - http://dergipark.org.tr/tr/download/article-file/213852
ER  -