TY  - JOUR
TT  - Effect of Optimum Insulation Thickness for Exterior Wall of Buildings on Energy Saving in  Edirne
AU  - Öztuna, Semiha
AU  - Dereli, Emre
PY  - 2016
DA  - August
JF  - Trakya Üniversitesi Fen Bilimleri Dergisi
JO  - Trakya Univ J Sci
PB  - Trakya Üniversitesi
WT  - DergiPark
SN  - 1305-6468
SP  - 139
EP  - 147
VL  - 10
IS  - 2
KW  - Optimum yalıtım kalınlığı
KW  - dış duvar yalıtımı
KW  - enerji tasarrufu
KW  - maliyet analizi
N2  - An important part of the energy consumed in buildings is used as a heating energy in Turkey. Thermal insulation is the most important application to minimize the heating energy in buildings. In this study, the optimum insulation thickness was calculated based on the number of degree days by using life cycle cost analysis method for Edirne province using 6 different fuels (domestic and imported coal, natural gas,LPG, electricity, fuel oil), For outdoor wall expanded polystyrene (EPS), rock wool insulation and the EPS sandwich wall insulation materials. These calculations in five different wall models, optimum insulation thickness and annual reimbursement for fuel and energy savings have been identified for two different applications of insulation materials and fuel for each. Best result is obtained fort he case that, domestic, the optimum insulation thickness 0,028-0.039 m, repayment periods from 2.1 to 4.2 years, energy saving 24% - 47% have been obtained for domestic coal as a fuel and EPS is as a insulation material
CR  - [1] Buyukalaca O., Bulut H, Yılmaz T.” Analysis of variable-base heating and cooling degree-days for Turkey. Applied Energy”; 69 (4): 269–283, 2001.
CR  - [2] Hasan A., “Optimizing insulation thickness for buildings using life cycle cost” Applied Energy; (63): 115-124, 1999.
CR  - [3] Çomaklı K, Yüksel B.; “Optimumizing Insulation Thickness of External Walls for Energy Saving” Applied Thermal Engineering; 23, 473-479,2003.
CR  - [4] Gölcü M., Dombaycı Ö.A., Abalı, S., “Denizli için optimum Yalıtım kalınlığının Enerji tasarrufuna Etkisi ve Sonuçları”, Gazi Üniversitesi Müh. Mim. Fak. Dergisi, Cilt 21, 639-644.
CR  - [5] Bolattürk A., “ Determination of Optimum Insulation Thickness for Building Walls with Respect to various Fuels and Climate Zones in Turkey, Applied Thermal Engineering; 26 , 1301–1309, 2006.
CR  - [6] Bolattürk A., “Optimum Insulation Thickness for Building Walls with Respect to Cooling and Heat Degree-Hours in the warmest Zone in Turkey,Bulding and Environment; 43 , 1055–1064, 2007
CR  - [7] Dombaycı Ö.A., Gölcü M., Pancar Y., “ Optimization of insulation thickness for external walls using different energy-sources” Applied Energy; 83, 921–928, 2006
CR  - [8] Aytaç A., Aksoy U.T., “Enerji Tasarrufu için Dış Duvarlarda Optimum Yalıtım Kalınlığı ve Isıtma Maliyeti İlişkisi”, Gazi Üniversitesi Müh. Mim. Fak. Dergisi, Cilt 21, 753-758, 2006.
CR  - [9] Özel M., “Bina Dış Duvarlarının Optimum Yalıtım Kalınlıkları için Dinamik Yaklaşım ve Maliyet Analizi”, Gazi Üniversitesi Müh. Mim. Fak. Dergisi, Cilt 23, 879-884, 2008
CR  - [10] TS 825 “Binalarda Isı Yalıtım Kuralları”, Resmi Gazete 27019 sayı, 2008.
CR  - [11] http://www.poas.com.tr
CR  - [12] http://www.tki.gov.tr/tki/komur.aspx
CR  - [13] http://www.trakyagazdas.com/sertifika/trakyagazdasgazfiyatlari.aspx
CR  - [14] Dağsöz A.K., Bayraktar K.G., “Türkiye’de Derece Gün Sayıları ve Enerji Politikalarımız”, İzocam Yayınları, A- 8, 1995.
UR  - https://dergipark.org.tr/tr/pub/trakyafbd/article/246029
L1  - https://dergipark.org.tr/tr/download/article-file/213866
ER  -