TY  - JOUR
TT  - ARTİFİCAL NEURAL NETWORK BASED MODELİNG OF CUTTING TIME IN THE MARBLE CUTTING PROCESS
AU  - Güvenç, Uğur
AU  - Dursun, Mustafa
AU  - Çimen, Hasan
PY  - 2011
DA  - June
JF  - Uluslararası Teknolojik Bilimler Dergisi
JO  - IJTS
PB  - Isparta Uygulamalı Bilimler Üniversitesi
WT  - DergiPark
SN  - 1309-1220
SP  - 9
EP  - 16
VL  - 3
IS  - 2
KW  - YSA
KW  - İlerleme Hızı
KW  - Testere Devir Sayısı
N2  - The marble cutting time which has a nonlinear structure changes depending on speed of circular saw rotation, forward speed and amount of cutting against time. Depending on this variables before mathematical modeling of the data optained from experiments made in laboratory environment are very difficult. In this study, intended to the completion time of marble cutting operation, based artificial neural network (ANN) modeling process were performed. 90% of the experimental data was given during training and 10% were used for testing purposes. According to the results obtained, performed the modelling was seen as applicable.
CR  - Bayram, F., Kulaksız, S. ve Özçelik, Y. (2003). Katraklarda Mermerlerin Fiziki-Mekanik
CR  - Özelliklerinin ve Kesim Hızının Elmas Soketlerdeki Aşınmalara Etkisi. Türkiye IV. Mermer Sempozyumu (Mersem 2003) Bildiriler Kitabı, 18-19 Aralık, Ankara.
CR  - Büyüksağış, I., S. (1998). Dairesel Testereli Blok Kesme Makinelerinde Mermerlerin
CR  - Kesilebilirlik Analizleri. Osmangazi Üniversitesi Fen Bilimleri Enstitüsü, Doktora tezi, Eskişehir. Caner, M., ve Akarslan, E. (2009). Mermer kesme işleminde spesifik enerji faktörünün
CR  - ANFIS ve YSA yöntemleri ile tahmini. Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi, 15 (2) 233-239. Çınar, S., M. (2007). Mermer Kesme Makinelerinde Elektrik Enerjisi Tüketimi
CR  - Optimizasyonu. AKÜ., Fen Bil.Ens. Yük.Lis.Tezi, Afyonkarahisar. Güvenç, U. (2007). Anahtarlamalı Relüktans Motor Manyetik Akısının Yapay Sinir Ağı
CR  - Tabanlı Modellenmesi.Akademik Bilişim’07- IX. Akademik Bilişim Konferansı Bildirileri, Dumlupınar Üniversitesi, Kütahya. İnan, A. (1999). Yapay Sinir Ağlarının Güç Sistemlerinde Kullanım Alanları. Kaynak Elektrik, Sayı 119, 104-114,
CR  - Kalogirou, S., A. (2001). Artificial neural networks in the renewable energy systems applications. A review, Renewable and Sustainable Energy Reviews, , vol. 5, pp. 373–401.
CR  - Kurt, H., Atik, K., Özkaymak, M. And Binark, A. K. (2007). The artificial neural networks approach for evaluation of temperature and density profiles of salt gradient solar pond.
CR  - Journal of the Energy Institute, , 80 (1), pp.46–51. Nasr, G., E. and Badr, C., J. (2003). Back-propagation neural networks for modeling gasoline consumption. Energy Conversion and Management, 44 (6), 893–905.
CR  - Öztemel E. (1992). Integrating expert systems and neural networks for intelligent on-line statistical process control. School of Electrical, Electronic and Systems Engineering,
CR  - University of Wales, PhD thesis. Cardiff, December p. 1–38. Saritas, İ. (2008). The Design of Magnetic Filter for Cleaning Industrial Liquids and Adaptive
CR  - Control of Filter by Artificial Intelligence Methods. Selcuk University Institute of the Natural and Applied Sciences, Phd Thesis. Spiegel, R.J., Turner, M.W., McCormick, V.E. (2003). Fuzzy-logic-based Controllers for
CR  - Efficiency Optimization of Evirici-fed Induction Motor Drivers. Elsevier, Fuzzy Sets and Systems 137, pp.387-401. Xu, X. P., Li, Y. Malkin, S. (2001). Forces and Energy in Circular Sawing and Grinding of
CR  - Granite. Journal of Manufacturing Science and Engineering, Feb., Vol.123, pp.13-22. Yang, I. H., Yeo, M., S. and Kim, K., W. (2003). Application of artificial neural network to predict the optimal start time for heating system in building. Energy Conversion and Management, vol. 44(17), pp.2791-2809.
CR  - U. Güvenç, S. Biroğul, ve Y. Sönmez., (2007). Yapay Sinir Ağları Eğitim Seti. The Proceedings of 7th International Educational Technology Conference, 3-5 May, Turkish
CR  - Republic of Northern Cyprus.
UR  - http://dergipark.org.tr/tr/pub/utbd/issue//273731
L1  - http://dergipark.org.tr/tr/download/article-file/254829
ER  -