TY  - JOUR
TT  - EXPERIMENTAL AND THEORETICAL ANALYSIS BENDING BEHAVIORS OF COMPOSITE MATERIALS SUBJECTED TO DIFFERENT ENVIRONMENTAL CONDITIONS
AU  - Tekin, Ayla
AU  - Esendemir, Ümran
AU  - Öndürücü, Ayşe
PY  - 2016
DA  - July
JF  - Soma Meslek Yüksekokulu Teknik Bilimler Dergisi
JO  - Soma MYO Teknik Bilimler Dergisi
PB  - Manisa Celal Bayar Üniversitesi
WT  - DergiPark
SN  - 1304-6330
SP  - 27
EP  - 37
VL  - 1
IS  - 21
KW  - Kompozit malzeme
KW  - sehim
KW  - ortam şartları
N2  - Composite materials can be exposed to very large temperature changes and different environmental conditions as they are used in different application areas and climates. In this study, bending behavior of epoxy composite material reinforced with meshed fiberglass held in four different environmental conditions was examined. Modules of elasticity of the materials held in different environments were determined with tests performed on samples prepared according to standards. Deflection values and bending strength obtained as a result of three-points bending tests held in four different environmental conditions, were compared. Deflection values from test results seems analogous with theoretically calculated deflection values. As a result of this experimental and numerical study, load carrying capacity of the composite samples held in pure water, sea water and acidic water was observed as lower than the ones that were held in room temperature conditions.
CR  - Sudhir S. Mathapati, Shivukumar S. Mathapati, 2015. Testing and analysis of mechanical properties of E-glass fiber reinforced epoxy polymer composites. International Journal of Research and Innovations in Science&Technology, 2(1), 46-52.
CR  - Rathnakar, G., Shivanan, H.K., 2013. Experimental evaluation of strength and stiffness of fibre reinforced composites under flexural loading. International Journal of Engineering and Innovative Technology (IJEIT), 2 (7), 219-222.
CR  - Almusallam, T., Al-Salloum, Y. , Alsayed, S. , Alhozaimy. A., 2002.  Durability of GFRP rebars in stressed concrete beams at different environments. 6th Saudi Eng Conf, KFUPM, Dhahran, 3,263-276.
CR  - Manalo, A.C., Aravinthan, T., Karunasena ,W., 2010. Flexural behaviour of glue-laminated fibre composite sandwich beams. Composite Structures, 92, 2703-2711.
CR  - Belevi, M., İnançer, G., 2008. Darbe ve ortam şartlarının kompozit malzemelerin mekanik özelliklerine etkileri. Makine Teknolojileri Elektronik Dergisi, 4,19-31.
CR  - Ghafoori, E., Motavalli, M., 2013. Flexural and interfacial behavior of metallic beams strengthened by prestressed bonded plates, Composite Structures. 101, 22–34.
CR  - Kılıç, O., Aktaş, A., Dirikolu, M.H., 2001. An investigating of the effects of shear on the deflection of an orthotropic cantilever beam by use of anisotropic elasticity theory. Composites Science and Technology, 61, 2055-2061.
CR  - Esendemir, Ü., 2005. The effects of shear on the deflection of linearly loaded composite cantilever beam. Journal of Reinforced Plastics and Composites, 24(11), 1159-1168.
CR  - Esendemir, Ü., Usal, M.R., Usal, M., 2006. The effects of shear on the deflection of simply supported composite beam loaded linearly. Journal of Reinforced Plastics and Composites, 25(8), 835-846.
CR  - Usal, M.R., Esendemir, Ü., Usal, M., 2008. Static and dynamic analysis of simply supported beams. Journal of Reinforced Plastics and Composites, 27(3), 263-276.
CR  - Tagarielli, V.L., Fleck, N.A, Deshpande, V.S., 2004. Collapse of clamped and simply supported composite sandwich beams in three-point bending. Composites: Part B, 35, 523–534.
CR  - Esendemir, Ü., Durak, E., Tunay, R.F. Usal, M.R., 2015. Flexure behavior of composite cantilevers subjected to different environmental conditions. Materials Testing, 57, 227-233.
CR  - Lekhnitskii, S.G., 1981. Theory of Elasticity of an Anisotropic Body. Mir Publishers, Moscow.
CR  - Jones, R.M., 1975. Mechanics of Composite Materials, Mcgraw-Hill, Kogakusha, Tokyo.
CR  - Esendemir, Ü., 2004. An elastic-plastic stress analysis in a polymer-matrix composite beam of arbitrary orientation supported from two ends acted upon with a force at the mid point. Journal of Reinforced Plastics and Composites, 23(6), 613-623.
CR  - Esendemir, Ü., 2009. Derivation of equations for flexure and shear deflections of simply supported beams. Pamukkale University Journal of Engineering Sciences, 15(2), 187-193.
CR  - Mourad, A.H.I., Abdel-Magid, B.M. El-Maaddawy, T. Grami M.E., 2010. Effect of seawater and warm environment on glass/epoxy and glass/polyurethane composites. Applied Composite Materials, 17,557-573.
UR  - https://dergipark.org.tr/tr/pub/somatbd/issue//278047
L1  - https://dergipark.org.tr/tr/download/article-file/259412
ER  -