TY  - JOUR
TT  - DİŞ HEKİMLİĞİNDE KULLANILAN CAD/CAM (BİLGİSAYAR DESTEKLİ TASARIM/BİLGİSAYAR DESTEKLİ ÜRETİM) SİSTEMLERİ VE MATERYALLER
AU  - Tokgöz Çetindağ, Merve
AU  - Meşe, Ayşef
PY  - 2016
DA  - December
DO  - 10.17567/ataunidfd.290443
JF  - Atatürk Üniversitesi Diş Hekimliği Fakültesi Dergisi
JO  - Ata Diş Hek Fak Derg
PB  - Atatürk Üniversitesi
WT  - DergiPark
SN  - 1300-9044
SP  - 524
EP  - 533
VL  - 26
IS  - 3
KW  - CAD/CAM
KW  - materyaller
N2  -  CAD/CAM sistemleri (bilgisayardestekli tasarım/ bilgi- sayar destekli üretim) diş hekimliğinde 1985 yılındanberi kullanılmaktadır. Son 30 yılda teknolojinin ilerle- mesiyle üstünözelliklerde çeşitli klinik ve laboratuvar CAD/CAM sistemleri geliştirilmeyedevam etmektedir. Özellikle hasta başında kullanılan CAD/CAM sistem- lerininyaygınlaşması ile birlikte protetik tedavilerin tek seansta bitirilmesiamaçlanarak, laboratuvar aşama- larının elimine edilmesini sağlayacakmateryallerin gelişimi hızlanmıştır. Bu derlemede günümüzde diş hekimliğindekullanılan CAD/CAM sistemleri ve materyaller anlatılmıştır.Anahtar kelimeler: CAD/CAM, materyaller, sistemlerDENTAL CAD/CAM(COMPUTER AIDED DESIGN/COMPUTER AIDED MANUFACTURING) SYSTEMS AND MATERIALSABSTRACT CAD/CAM systems (computer aideddesign/computer aided manufacturing) has been used in dentistry since 1985. Inthe past 30 years, development of various high quality chairside and laboratoryCAD/CAM systems has been continued with the progress of technology. Especiallythe improvements of CAD/CAM systems lets the practitioners choose differentrestorative materials than the conventional ones, place chairside restorationsand also descrease the laboratory procedures. This article describes currentlyused CAD/CAM systems and materials. Key words: CAD/CAM, materials, systems
CR  - 1.	Karaalioğlu OF, Duymuş ZY, Diş hekimliğinde uygulanan CAD/CAM sistemleri, Atatürk Üniv Diş Hek Fak Derg. 2008; 18: 25-32.
CR  - 2.	Strub JR, Rekow ED, Witkowski S, Computer-aided design and fabrication of dental restorations: Current systems and future possibilities, J Am Dent Assoc. 2006; 137: 1289- 96.
CR  - 3.	Giordano R, Materials for chairside CAD/CAM-produced restorations, J Am Dent Assoc. 2006; 137: 14-21.
CR  - 4.	Fasbinder DJ, Clinical performance of chairside CAD/CAM restorations, J Am Dent Assoc. 2006; 137: 225-315.
CR  - 5.	Raigrodski AJ, Contemporary materials and technologies for all-ceramic fixed partial dentures: a review of the literatüre, J Prosthet Dent. 2004 Dec; 92: 557-62.
CR  - 6.	Sjögren G, Molin M, van Dijken JWV, A 10-year prospective evaluation of CAD/CAM-manufactured (Cerec) ceramic inlays cemented with a chemically cured or dual-cured resin composite, Int J Prosthodont. 2004; 17: 241-6.
CR  - 7.	Denissen HW, van der Zel JM, van Waas MAJ, Measurement of the margins of partial-coverage tooth preparations for CAD/CAM, Int J Prosthodont. 1999; 12: 395-400.
CR  - 8.	Williams RJ, Bibb R, Rafik T, A technique for fabricating patterns for removable partial denture frameworks using digitized casts and electronic surveying, J Prosthet Dent. 2004; 91: 85-8.
CR  - 9.	Marchack CB, CAD/CAM-guided implant surgery and fabrication of an immediately loaded prosthesis for a partially edentulous patient, J Prosthet Dent. 2007; 97: 389- 94.
CR  - 10.	Williams RJ, Bibb R, Eggbeer D, Collis J, Use of CAD/ CAM technology to fabricate a removable partial denture framework, J Prosthet Dent. 2006; 96: 96-9.
CR  - 21.	Duret D, Preston JD, CAD/CAM imaging in dentistry, Curr Opinion Dent. 1991; 1: 150–154.
CR  - 22.	 Feuerstein P, Can technology help dentists deliver better patient care?, J Am Dent Assoc. 2004; 135; 11-6.
CR  - 23.	 Christensen GJ, Computerized restorative dentistry: State of the art, J Am Dent Assoc. 2001; 132: 1301- 3.
CR  - 24.	Giordano R, Materials for Chairside CAD/CAM produced restorations, J Am Dent Assoc. 2006; 137: 14-21.
CR  - 25.	Liu PR, Essig ME, A panorama of dental CAD/CAM restorative systems, Compend Contin Educ Dent. 2008; 29: 482-93.
CR  - 26.	Rosentiel SF, Land MF, Fujimoto J, Contemporary fixed prosthodontics, The C. V. Mosby Company. 2001: 643-72.
CR  - 27.	Çelik G, Computer aided dentstry and current CAD/CAM systems, Cumhuriyet Dent J. 2013; 16: 74-82.
CR  - 28.	Miyazaki T, Hotta Y, Kunii J, 
Kuriyama S, Tamaki Y, A review of dental CAD/CAM: current status and future perspectives from 20 years of experience, Dent Mater J. 2009; 28: 44-56.
CR  - 29.	Andersson M, Ogden A, A new all- ceramic crown: a densely sintered, high purity alumina coping with porcelain, Acta Odontol Scand. 1993; 51: 59-64.
CR  - 30.	Conrad HJ, Seong WJ, Pesun IJ, Current ceramic materials and systems with clinical recommendations: a systematic review, J Prosthet Dent. 2007; 98: 389-404
CR  - 41.	Kelly JR, Nishimura I, Campbell SD, Ceramics in dentistry: historical roots and current perspectives, J Prosthet Dent. 1996; 75: 18-32.
CR  - 42.	Giordano RA, Dental ceramic restorative systems, Compend Contin Educ Dent. 1996; 17: 779-82.
CR  - 43.	Albakry M, Guazzato M, Swain MV, Biaxial flexural strenghth and microstructure changes of two recycled pressable glass ceramics, J Prosthodont. 2004; 13: 141-9.
CR  - 44.	Tinschert J, Zwez D, Marx R, Anusavice KJ, Structural reliability of alümina-feldspar-leucite-mica and zirconia-based ceramics, J Dent.  2000; 28: 529-35.
CR  - 45.	Fasbinder DJ, Restorative material options for CAD/CAM restorations, Compend Contin Educ Dent. 2002; 23: 911-916, 918-20.
CR  - 46.	Pagniano RP, Seghi RR, Rosenstiel SF, Wang R, Katsube N, The affect of a layer of resin luting agent on the biaxial flexural strenght of two all-ceramic systems, J Prosthet Dent. 2005; 93: 459-66.
CR  - 47.	Rosenstiel SF, Land MF, Fujımato J, Contemporary fixed prosthodontics, 4th ed, St Louis: Mosby Elsevier;2006.
CR  - 48.	Ritzberger C, Apel E, Höland W, Perschke A, Rheinberger VM, Properties and clinical application of three types of dental glass-ceramics and ceramics for CAD/CAM Technologies, Metarials.  2010; 33: 700-13.
CR  - 49.	Guess PC, Zavanelli RA, Silva NR, Bonfante EA, Coelho PG, Thompson VP, Monolithic CAD/CAM lihium disilicate versus veneered YTZ-P crowns: comparison of failure modes and reliability after fatigue, Int J Prosthodont. 2010; 23: 434-42.
CR  - 50.	Taskonak B, Mecholsky JJ Jr, Anusavice KJ, Residual stress in bilayer dental seramics, Biomaterials. 2005; 26: 3235-41
CR  - 60.	Raigrodski AJ, Contemporary all ceramic fixed partial dentures:a review, Dent Clin North Am. 2004; 48: 531-44.
CR  - 61.	Güth JF, Zuch T, Zwinge S, Engels J, Stimmelmayr M, Edelhoff D, Optical properties of manually and CAD/CAM-fabricated polymers, Dent Mater J. 2013; 32: 865-71.
CR  - 62.	Höland W, Schweiger M, Frank M, Rheinberger V, A comparison of the microstructure and properties of the IPS Empress glass ceramics, J Biomed Mater Res. 2000; 53: 297-303.
CR  - 63.	Lauvahutanon S, Takahashi H, Shiozawa M, Iwasaki N, Asakawa Y, Oki M, et al, Mechanical properties of composite resin blocks for CAD/CAM, Dent Mater J. 2014; 33: 705-10.
CR  - 64.	Mehl C, Harder S, Byrne A, Kern M, Prosthodontics in digital times: a case report, Quintessence Int. 2013; 44: 29-36.
CR  - 65.	Zimmermann M, Mehl A, Reich S, New CAD/CAM materials and blocks for chairside procedures, Int J Comp Dent. 2013; 16: 173-81.
UR  - https://doi.org/10.17567/ataunidfd.290443
L1  - https://dergipark.org.tr/tr/download/article-file/274042
ER  -