TY  - JOUR
TT  - Design and Implementation of Step Angle Control by using PIC Controller for Step Motor-Fed Photovoltaic Panels
AU  - Kocalmış Bilhan, Ayşe
PY  - 2017
DA  - December
Y2  - 2017
DO  - 10.17100/nevbiltek.306207
JF  - Nevşehir Bilim ve Teknoloji Dergisi
PB  - Nevşehir Hacı Bektaş Veli Üniversitesi
WT  - DergiPark
SN  - 2148-466X
SP  - 633
EP  - 642
VL  - 6
IS  - 2
KW  - Adım motor
KW  - Kontrolör
KW  - Fotovoltaik sistem
N2  - In recent years, steppermotors have been used in many applications such as requiring precise positioncontrol, primarily electronic and computer technology. In this work, thecontroller is designed for mechanical system applications in differentspecifications using stepping motors. During the study, photovoltaic (PV)panel, which is at the head of the clean energy sources which are increasing inpopularity today as the supply voltage, is preferred. In addition, the chargecontrol regulator was used to stabilize the output voltage, to prevent voltagefluctuations at the panel output caused by solar radiation from thephotovoltaic panel and to obtain the voltage value of battery which isconnected to the system. This article focuses on controlling the permanentmagnet stepper motor as a PIC16F84A using a microcontroller. The proposedsystem was simulated with the Proteus program and tested on an experimentalsystem with a control circuit.
CR  - Ahmedy T, Nishida K, Nakaoka MC. “Wind Power Grid Integration of an IPMSG Using a Diode Rectifier and a Simple MPPT Control for Grid-Side Inverters”. Journal of Power Electronics, 10(5), 548-554, 2010.
CR  - Carrasco JM, Franquelo LG, Bialasiewicz JT, Galvan E, Guisado RCP, Prats MAM, Leon JI, and Alfonso NM. ”Power-electronic systems for the grid integration of renewable energy sources: a survey”.  IEEE Transactions on Industrial Electronics, 53(4), 1002-1016, 2006.
CR  - Lee JE, Liang TJ, Chen JF. “Isolated coupled inductor integrated DC-DC converter with non-dissipative snubber for solar energy applications”. IEEE Transactions on Industrial Electronics, 61(7), 3337-3348, 2014.
CR  - Cheng KWE, Sutanto D, Ho YL, Law KK. “Exploring the power conditioning system for fuel cell”. IEEE Power Electronics Specialists Conference, Vancouver, Canada, 2197–2202, 2001.
CR  - Koutroulis E, Kalaitzakis K, Voulgaris NC. “Development of a Microcontroller-Based, Photovoltaic Maximum Power Point Tracking Control System”. IEEE Transactions on Power Electronics, 16(1), 46–54, 2001.
CR  - Shicheng Z, Wei L. “Research and Implementation of Photovoltaic Charging System with Maximum Power Point Tracking”. International Conference on Industrial Engineering and Applications, Xi’an, China, 619-624, 2008.
CR  - Millman J, Halkias CC. Electronic Devices and Circuits, McGrow-Hill, New York, 1967.
CR  - Altaş İH. "Yenilenebilir Enerji Kaynakları ve Türkiye‟deki Potansiyel". Enerji, Elektrik, Elektromekanik Dergisi, 45, 58-63, Şubat 1998.
CR  - Pires VF, Martins JF, Foito D, Hão C. “A Grid Connected Photovoltaic System with a Multilevel Inverter and a Le-Blanc Transformer”. International Journal of Renewable Energy Research, 2(1), 84-91, 2012.
CR  - Jain S, Ramulu C, Padmanaban S, Ojo JO, Ertas AH. “Dual MPPT Algorithm for Dual PV Source Fed Open-End Winding Induction Motor Drive for Pumping Application”. An International Journal of Engineering Science and Technology, 19(4), 1731-1741, 2016.
CR  - Philip J, et al. “Control and Implementation of a Standalone Solar Photo-Voltaic Hybrid System”. IEEE Transactions on Industrial Electronics, 52(4), 3472–3479, 2016.
CR  - Bhag SG, Hiziroglu HR. Electric Machinery and Transformers. Oxford University Press., 2001.
CR  - Ravi A, Manoharan PS, Anand JV. “Modeling and Simulation of Three Phase Multilevel Inverter for Grid Connected Photovoltaic Systems”. Solar Energy, 85, 2811–2818, 2011.
CR  - Xiao W, Dunford WG, Capel A. “A Novel Modeling Method for Photovoltaic Cells”. IEEE Proceedings on 35th Annual Power Electronics Specialists Conference, Aachen, Germany, 3, 1950–1956, 2004.
CR  - Shekoofa O, Taherbaneh M. “Modelling of Silicon Solar Panel by MATLAB/Simulink and Evaluating the Importance of Its Parameters in a Space Application”. Recent Advances in Space Technologies 3rd International Conference, İstanbul, Türkiye, 719-724, 14-16 June 2007.
CR  - Yang SM, Lin FC, Chen MT. "Micro-Stepping Control of a Two-Phase Linear Stepping Motor with Three-Phase VSI Inverter for High-Speed Applications". IEEE Transactions on Industrial Applications, 40(5), 1257-1264, 2004.
CR  - Chapman SJ. Elektrik Makinalarının Temelleri. Dördüncü Baskı, 2007.
CR  - Türkyılmaz A. “RF Kontrol Işareti Kullanılarak Mikrodenetleyici Tabanlı Adım Motor Kontrol Setinin Hazırlanması”. Yüksek Lisans Tezi, Marmara Üniversitesi Fen Bilimleri Enstitüsü, İstanbul, 2008.
UR  - https://doi.org/10.17100/nevbiltek.306207
L1  - http://dergipark.org.tr/tr/download/article-file/395927
ER  -