TY  - JOUR
TT  - Effect of boron compounds on the thermal and combustion properties of wood-plastic composites
AU  - Altuntaş, Ertuğrul
AU  - Karaoğul, Eyyup
AU  - Alma, Mehmet Hakkı
PY  - 2017
DA  - November
Y2  - 2017
DO  - 10.18182/tjf.308944
JF  - Turkish Journal of Forestry
PB  - Isparta Uygulamalı Bilimler Üniversitesi
WT  - DergiPark
SN  - 2149-3898
SP  - 247
EP  - 250
VL  - 18
IS  - 3
KW  - Yangın geciktiriciler
KW  - Odun Plastik kompozit
KW  - Termal özellikler
KW  - Borlu bileşikler
N2  - In this study, the thermal properties and fire resistancesof the wood plastic composites produced with waste lignocellulosic materialswere investigated. For this purpose, lignocellulosic waste, high densitypolyethylene, (HDPE) sodium borate (borax) and boric acid was used to producethe wood-plastic composites. A twin-screw extruder was used during theproduction of the wood plastic composites. The produced composite granule waspressed at 175 °C hot press. The effects of boric acid and borax added to woodplastic composites were investigated with the thermal gravimetric analysis(TGA), the horizontal burning rate and the limiting oxygen index (LOI).According to the results, it was understood that as the amount of the boroncompounds was increased, the burning degree (°C) of the composite materialincreased. Furthermore, the using of the boric acid and sodium borate in theproduction of the wood plastic composite decreased burning speed.
CR  - ASTM D635, 2014. Standard test method for rate of burning and/or extent and time of burning of plastics in a horizontal position, ASTM International, West Conshohocken, USA.
CR  - ASTM D2863, 2000. Standard test method for measuring the minimum oxygen concentration to support candle-like combustion of plastics (oxygen index), ASTM International, West Conshohocken, USA.
CR  - Ayrilmis, N., 2013. Combined effects of boron and compatibilizer on dimensional stability and mechanical properties of wood/HDPE composites. Composites Part B-Engineering, 44(1): 745-749.
CR  - Cavdar, A. D., Mengeloglu, F., Karakus, K., 2015. Effect of boric acid and borax on mechanical, fire and thermal properties of wood flour filled high density polyethylene composites. Measurement, 60: 6-12.
 
Chai, Y. B., Liu, J. L., Xing, Z., 2012. Dimensional stability, mechanical properties and fire resistance of MUF-Boron treated wood.  Material and Manufacturing Technology Ii, Pts 1 and 2, 341-342, pp.80-84.
CR  - Clemons, C., 2002. Wood-plastic composites in the United States: The interfacing of two industries. Forest Products Journal, 52(6): 10.
CR  - Contat-Rodrigo, L., Ribes-Greus, A., Imrie, C. T., 2002. Thermal analysis of high-density polyethylene and low-density polyethylene with enhanced biodegradability. Journal of Applied Polymer Science, 86(3): 764-772.
CR  - Dizman, E., Yıldız, Ü. C., Yıldız, S., Aslan, M., Temiz, A., Gezer, E. D., 2006. Asetillendirilmiş Ladin yongalevhalarinin esmer çürüklük mantarına (Coniophora puteana) karşi dayanıklılığı. Artvin Çoruh Üniversitesi Orman Fakültesi Dergisi, 7(2): 106-115.
CR  - Kurt, R., Mengeloglu, F., 2011. Utilization of boron compounds as synergists with ammonium polyphosphate for flame retardant wood-polymer composites. Turkish Journal of Agriculture and Forestry, 35(2): 155-163.
CR  - Kurt, R., Mengeloglu, F., Meric, H., 2012. The effects of boron compounds synergists with ammonium polyphosphate on mechanical properties and burning rates of wood-HDPE polymer composites. European Journal of Wood and Wood Products, 70(1-3): 177-182.
CR  - Levan, S. L., 1984. Chemistry of fire retardancy. Advances in Chemistry Series, (207): 531-574.
CR  - Li, L., Guo, W., Guo, C., 2017. Synergistic effect of melamine polyphosphate and aluminum hypophosphite on mechanical properties and flame retardancy of HDPE/wood flour composites. Wood Science and Technology, 51(3): 493-506.
CR  - Najafi, S. K., Tajvidi, M., Chaharmahli, M., 2006. Long-term water uptake behavior of lignocellulosic-high density polyethylene composites.  Journal of Applied Polymer Science, 102(4): 3907-3911.
CR  - Ozdemir, F., Ayrilmis, N., Kaymakci, A., Kwon, J. H., 2014. Improving dimensional stability of injection molded wood plastic composites using cold and hot water extraction methods. Maderas-Ciencia Y Tecnologia, 16(3): 365-372.
CR  - Price, D., Anthony, G., Carty, P., 2001. Polymer combustion, condensed phase pyrolysis and smoke formation. Fire retardant materials. Cambridge, UK, 1-30.
CR  - Randriamanantena, T., Razafindramisa, F. L., Ramanantsizehena, G., Bernes, A., Lacabane, C., 2009. Thermal behaviour of three woods of Madagascar by thermogravimetric analysis in inert atmosphere. The Fourth High-Energy Physics International Conference, Antananarivo, Madagascar, 21-28 August, 2009. pp. 5-10.
CR  - Wu, G. F., Xu, M., 2014. Effects of boron compounds on the mechanical and fire properties of wood-chitosan and high-density polyethylene composites. Bioresources, 9(3): 4173-4193.
UR  - https://doi.org/10.18182/tjf.308944
L1  - https://dergipark.org.tr/tr/download/article-file/373505
ER  -