TY  - JOUR
TT  - Theoretical Analysis Of Abrasive Waterjet And Modelling With Artificial Neural Network
AU  - Ergür, Hayriye Sevil
PY  - 2009
DA  - December
Y2  - 2009
JF  - Eskişehir Osmangazi Üniversitesi Mühendislik ve Mimarlık Fakültesi Dergisi
JO  - ESOGÜ Müh Mim Fak Derg
PB  - Eskişehir Osmangazi Üniversitesi
WT  - DergiPark
SN  - 2630-5712
SP  - 179
EP  - 197
VL  - 22
IS  - 2
KW  - Aşındırıcı su jeti
KW  - kesme
KW  - yapay sinir ağları
KW  - yüzey pürüzlülüğü.
N2  - Abrasive water jet cutting is one of the most recently developednon-traditional manufacturing technologies being used increasingly in mining and machineproduction industry owing to the various distinct advantages over the other cuttingTechnologies.. Absence of the heat affected zone is the main advantage of this process. In spiteof briteness, ductileness and being composites it do have rather wide machining process, butstriations are the main disadvantage of this cutting technology. The technology must be knownvery well in order to increase the capacity and cutting performance. Abrasive water jet cuttingapplications on specimens with varying thickness and feed rate had been shown that artificialneural network can be used succesfully in this work. The lack of knowledge in describing thehydraulic characteristics of the abrasive water jet cutting will limit the development of theprocess control and optimization of the modelling. Therefore, in order to determine the optimalcutting performance of the process planning and cutting processs, mathematical models withdimensional analysis and artificial neural network applications are used. In this study, abrasivewater jet cutting has been analysed and the experimental data at various conditions had beenmodelled with the aid of artificial neural network.
CR  - [1] H.S.Ergür, “Aşındırıcı su jetinin teorik analizi ve yapay sinir ağı yöntemiyle
modellenmesi”, Eskişehir Osmangazi Üniversitesi, Doktora Tezi, Eskişehir, 2007.
CR  - [2] Machinability data center, “Machining data handbook”, 3rd edition, Vol.2, , Techsolve,
Inc., Cincinnati, OH, 1980.
CR  - [3] C. Öjmerts, “AWJ machining”, Licentiate Thesis, Chalmers Univ. of Techn., 1994.
CR  - [4] C. Öjmerts, “Analysis of surfaces produced by abrasive waterjet milling techniques”,
Proceedings. of 13th International Conference on Jet Cutting Technology, Sardinia, Italy,
pp. 753-768, 1996.
CR  - [5] F.X. Diebold, and Mariano, “Comparing predictive accuracy”, Journal of Business and
Economic Statistics, vol.13, pp. 253-264, 1995.
CR  - [6] S. Gülseçen, “Yapay sinir ağlarının işletme alanında uygulanması ve bir örnek çalışma”,
Doktora tezi, İstanbul Üniversitesi, 1993.
CR  - [7] M.L Minsky, and S.A. Papert, “Perceptrons”, Cambridge, MA: MIT Pres., 1969.
CR  - [8] E. Öztemel, “Yapay sinir ağları”, Papatya Yayıncılık, İstanbul, 2003.
CR  - [9] www.omax corporation, “Water requirements", 2005.
UR  - https://dergipark.org.tr/tr/pub/ogummf/issue//325456
L1  - https://dergipark.org.tr/tr/download/article-file/320441
ER  -